linux-kernel - [PATCH RFC] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210822230235.10953-1-fmdefrancesco@gmail.com>
Date:   Mon, 23 Aug 2021 01:02:35 +0200
From:   "Fabio M. De Francesco" <fmdefrancesco@...il.com>
To:     Larry Finger <Larry.Finger@...inger.net>,
        Phillip Potter <phil@...lpotter.co.uk>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-staging@...ts.linux.dev (open list:STAGING SUBSYSTEM),
        linux-kernel@...r.kernel.org (open list),
        Pavel Skripkin <paskripkin@...il.com>
Cc:     "Fabio M. De Francesco" <fmdefrancesco@...il.com>
Subject: [PATCH RFC] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq()

Replace usb_control_msg() with the new usb_control_msg_recv() and
usb_control_msg_send() API of USB Core.

This patch is an RFC for different reasons:

1) I'm not sure if it is needed: while Greg Kroah-Hartman suggested to 
use the new API in a message to a thread that was about a series of patches
submitted by Pavel Skripkin (who decided to not use it), I cannot explain 
if and why the driver would benefit from this patch.
2) I have doubts about the sematic of the API I use here, so I'd like to
know whether or not I'm using them properly.
3) At the moment I cannot test the driver because I don't have my device
with me.
4) This patch could probably lead to a slight change in some lines of
Pavel's series (for sure in usb_read*()).

I'd like to hear from the Maintainers and other interested people if this
patch is worth to be considered and, in this case, if there are suggestions
for the purpose to improve it. 

Suggested-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@...il.com>
---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index 6a0a24acf292..9e290c1cc449 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -15,7 +15,7 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
 	struct adapter	*adapt = pintfhdl->padapter;
 	struct dvobj_priv  *dvobjpriv = adapter_to_dvobj(adapt);
 	struct usb_device *udev = dvobjpriv->pusbdev;
-	unsigned int pipe;
+	u8 pipe;
 	int status = 0;
 	u8 reqtype;
 	u8 *pIo_buf;
@@ -47,19 +47,20 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
 		memset(pIo_buf, 0, len);
 
 		if (requesttype == 0x01) {
-			pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
 			reqtype =  REALTEK_USB_VENQT_READ;
+			status = usb_control_msg_recv(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
+						      reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
+						      pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT,
+						      GFP_KERNEL);
 		} else {
-			pipe = usb_sndctrlpipe(udev, 0);/* write_out */
 			reqtype =  REALTEK_USB_VENQT_WRITE;
-			memcpy(pIo_buf, pdata, len);
+			status = usb_control_msg_send(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
+						      reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
+						      pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT,
+						      GFP_KERNEL);
 		}
 
-		status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
-					 reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
-					 pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
-
-		if (status == len) {   /*  Success this control transfer. */
+		if (!status) {   /*  Success this control transfer. */
 			rtw_reset_continual_urb_error(dvobjpriv);
 			if (requesttype == 0x01)
 				memcpy(pdata, pIo_buf,  len);
-- 
2.32.0