[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGXv+5EMoZq8BohUA_OoChmEdHL988pphxUJX077hO88htRUtA@mail.gmail.com>
Date: Mon, 23 Aug 2021 20:13:56 +0800
From: Chen-Yu Tsai <wenst@...omium.org>
To: Chun-Jie Chen <chun-jie.chen@...iatek.com>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Stephen Boyd <sboyd@...nel.org>,
Nicolas Boichat <drinkcat@...omium.org>,
Rob Herring <robh+dt@...nel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>, linux-clk@...r.kernel.org,
Devicetree List <devicetree@...r.kernel.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [v2 11/24] clk: mediatek: Add MT8195 ccusys clock support
On Fri, Aug 20, 2021 at 7:23 PM Chun-Jie Chen
<chun-jie.chen@...iatek.com> wrote:
>
> Add MT8195 ccusys clock controller which provides clock gate
> control in Camera Computing Unit.
Could you offer a bit more explanation about this unit? Is it an ISP?
Or some other function that does computation on images?
> Signed-off-by: Chun-Jie Chen <chun-jie.chen@...iatek.com>
> Reviewed-by: Chen-Yu Tsai <wenst@...omium.org>
> ---
> drivers/clk/mediatek/Makefile | 3 +-
> drivers/clk/mediatek/clk-mt8195-ccu.c | 50 +++++++++++++++++++++++++++
> 2 files changed, 52 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/mediatek/clk-mt8195-ccu.c
>
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index 718bbb04191b..03fb020834f3 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_COMMON_CLK_MT8192_MSDC) += clk-mt8192-msdc.o
> obj-$(CONFIG_COMMON_CLK_MT8192_SCP_ADSP) += clk-mt8192-scp_adsp.o
> obj-$(CONFIG_COMMON_CLK_MT8192_VDECSYS) += clk-mt8192-vdec.o
> obj-$(CONFIG_COMMON_CLK_MT8192_VENCSYS) += clk-mt8192-venc.o
> -obj-$(CONFIG_COMMON_CLK_MT8195) += clk-mt8195-apmixedsys.o clk-mt8195-topckgen.o clk-mt8195-peri_ao.o clk-mt8195-infra_ao.o clk-mt8195-cam.o
> +obj-$(CONFIG_COMMON_CLK_MT8195) += clk-mt8195-apmixedsys.o clk-mt8195-topckgen.o clk-mt8195-peri_ao.o clk-mt8195-infra_ao.o clk-mt8195-cam.o \
> + clk-mt8195-ccu.o
When wrapping, please align with previous line. "clk-mt8195-ccu.o" should
align with "clk-mt8195-apmixedsys.o".
ChenYu
Powered by blists - more mailing lists