[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqLBddXVeP-t++wqPNp=xYF7tvEcnCbjFnK9CUBLK2+9JA@mail.gmail.com>
Date: Tue, 24 Aug 2021 15:05:23 -0500
From: Rob Herring <robh+dt@...nel.org>
To: Kefeng Wang <wangkefeng.wang@...wei.com>,
Saravana Kannan <saravanak@...gle.com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Frank Rowand <frowand.list@...il.com>,
devicetree@...r.kernel.org, Russell King <linux@...linux.org.uk>,
Linus Walleij <linus.walleij@...aro.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Ruizhe Lin <linruizhe@...wei.com>
Subject: Re: [PATCH 3/3] amba: Properly handle device probe without IRQ domain
+Saravana
Saravana mentioned to me there may be some issues with this one...
On Mon, Aug 16, 2021 at 2:43 AM Kefeng Wang <wangkefeng.wang@...wei.com> wrote:
>
> of_amba_device_create() uses irq_of_parse_and_map() to translate
> a DT interrupt specification into a Linux virtual interrupt number.
>
> But it doesn't properly handle the case where the interrupt controller
> is not yet available, eg, when pl011 interrupt is connected to MBIGEN
> interrupt controller, because the mbigen initialization is too late,
> which will lead to no IRQ due to no IRQ domain found, log is shown below,
> "irq: no irq domain found for uart0 !"
>
> use of_irq_get() to return -EPROBE_DEFER as above, and in the function
> amba_device_try_add()/amba_device_add(), it will properly handle in such
> case, also return 0 in other fail cases to be consistent as before.
>
> Cc: Russell King <linux@...linux.org.uk>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Frank Rowand <frowand.list@...il.com>
> Reported-by: Ruizhe Lin <linruizhe@...wei.com>
> Signed-off-by: Kefeng Wang <wangkefeng.wang@...wei.com>
> ---
> drivers/amba/bus.c | 27 +++++++++++++++++++++++++++
> drivers/of/platform.c | 6 +-----
> 2 files changed, 28 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
> index 36f2f42c8014..720aa6cdd402 100644
> --- a/drivers/amba/bus.c
> +++ b/drivers/amba/bus.c
> @@ -19,6 +19,7 @@
> #include <linux/clk/clk-conf.h>
> #include <linux/platform_device.h>
> #include <linux/reset.h>
> +#include <linux/of_irq.h>
>
> #include <asm/irq.h>
>
> @@ -371,12 +372,38 @@ static void amba_device_release(struct device *dev)
> kfree(d);
> }
>
> +static int of_amba_device_decode_irq(struct amba_device *dev)
> +{
> + struct device_node *node = dev->dev.of_node;
> + int i, irq = 0;
> +
> + if (IS_ENABLED(CONFIG_OF_IRQ) && node) {
> + /* Decode the IRQs and address ranges */
> + for (i = 0; i < AMBA_NR_IRQS; i++) {
> + irq = of_irq_get(node, i);
> + if (irq < 0) {
> + if (irq == -EPROBE_DEFER)
> + return irq;
> + irq = 0;
> + }
> +
> + dev->irq[i] = irq;
> + }
> + }
> +
> + return 0;
> +}
> +
> static int amba_device_try_add(struct amba_device *dev, struct resource *parent)
> {
> u32 size;
> void __iomem *tmp;
> int i, ret;
>
> + ret = of_amba_device_decode_irq(dev);
> + if (ret)
> + goto err_out;
> +
> ret = request_resource(parent, &dev->res);
> if (ret)
> goto err_out;
> diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> index 74afbb7a4f5e..32d5ff8df747 100644
> --- a/drivers/of/platform.c
> +++ b/drivers/of/platform.c
> @@ -222,7 +222,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
> {
> struct amba_device *dev;
> const void *prop;
> - int i, ret;
> + int ret;
>
> pr_debug("Creating amba device %pOF\n", node);
>
> @@ -253,10 +253,6 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
> if (prop)
> dev->periphid = of_read_ulong(prop, 1);
>
> - /* Decode the IRQs and address ranges */
> - for (i = 0; i < AMBA_NR_IRQS; i++)
> - dev->irq[i] = irq_of_parse_and_map(node, i);
> -
> ret = of_address_to_resource(node, 0, &dev->res);
> if (ret) {
> pr_err("amba: of_address_to_resource() failed (%d) for %pOF\n",
> --
> 2.26.2
>
Powered by blists - more mailing lists