linux-kernel - Re: [PATCH v2] Input: ili210x - Set the device name according to the device model

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAOkaPuWECCHxk=t5U+=nnvkwpPXp0dbuBmqU1wKskQi+7OJ1bg@mail.gmail.com>
Date:   Fri, 3 Sep 2021 14:53:05 -0300
From:   Rogerio Pimentel <rpimentel.silva@...il.com>
To:     Marek Vasut <marex@...x.de>
Cc:     dmitry.torokhov@...il.com, hansemro@...look.com,
        linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] Input: ili210x - Set the device name according to the
 device model

On Fri, Sep 3, 2021 at 2:05 PM Marek Vasut <marex@...x.de> wrote:
>
> On 9/3/21 6:54 PM, Rogerio Pimentel wrote:
> > Adding the device model into the device name is useful when
> > applications need to set different parameters according to the
> > touchscreen being used, e.g. X11 calibration points.
> >
> > Signed-off-by: Rogerio Pimentel <rpimentel.silva@...il.com>
> > ---
> >
> > Changes since v1: Get the device ID from touchscreen controller
> > instead of driver's device list.
> >
> >   drivers/input/touchscreen/ili210x.c | 11 ++++++++++-
> >   1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
> > index 199cf3daec10..7a897a03ed70 100644
> > --- a/drivers/input/touchscreen/ili210x.c
> > +++ b/drivers/input/touchscreen/ili210x.c
> > @@ -19,10 +19,14 @@
> >   #define ILI251X_DATA_SIZE1  31
> >   #define ILI251X_DATA_SIZE2  20
> >
> > +#define ILI_NAME_LEN         27
> > +#define ILITEK_TS_NAME "Ilitek ILI%x%x Touchscreen"
> > +
> >   /* Touchscreen commands */
> >   #define REG_TOUCHDATA               0x10
> >   #define REG_PANEL_INFO              0x20
> >   #define REG_CALIBRATE               0xcc
> > +#define REG_TS_MODEL         0x61
>
> Have a look at the following patch for the extra register names:
> [PATCH v3 2/3] Input: ili210x - export ili251x version details via sysfs

Ok, I will.

>
> >   struct ili2xxx_chip {
> >       int (*read_reg)(struct i2c_client *client, u8 reg,
> > @@ -384,6 +388,8 @@ static int ili210x_i2c_probe(struct i2c_client *client,
> >       struct input_dev *input;
> >       int error;
> >       unsigned int max_xy;
> > +     unsigned char buf[2];
> > +     char *model_name;
> >
> >       dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
> >
> > @@ -430,7 +436,10 @@ static int ili210x_i2c_probe(struct i2c_client *client,
> >       i2c_set_clientdata(client, priv);
> >
> >       /* Setup input device */
> > -     input->name = "ILI210x Touchscreen";
> > +     input->name = ILITEK_TS_NAME;
> > +     model_name = (char *)input->name;
> > +     priv->chip->read_reg(priv->client, REG_TS_MODEL, buf, 2);
>
> Please check return value of ^ that function.

Ok, I will make the changes.

>
> > +     snprintf(model_name, ILI_NAME_LEN, input->name, buf[1], buf[0]);
> >       input->id.bustype = BUS_I2C;
>
> This was still tested only on ili2511, right ?

Yes, by now I have only tested ili2511.