linux-kernel - Re: [PATCH v2] Input: ili210x - Set the device name according to the device model

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 3 Sep 2021 19:05:26 +0200
From:   Marek Vasut <marex@...x.de>
To:     Rogerio Pimentel <rpimentel.silva@...il.com>,
        dmitry.torokhov@...il.com, hansemro@...look.com,
        linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] Input: ili210x - Set the device name according to the
 device model

On 9/3/21 6:54 PM, Rogerio Pimentel wrote:
> Adding the device model into the device name is useful when
> applications need to set different parameters according to the
> touchscreen being used, e.g. X11 calibration points.
> 
> Signed-off-by: Rogerio Pimentel <rpimentel.silva@...il.com>
> ---
> 
> Changes since v1: Get the device ID from touchscreen controller
> instead of driver's device list.
> 
>   drivers/input/touchscreen/ili210x.c | 11 ++++++++++-
>   1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
> index 199cf3daec10..7a897a03ed70 100644
> --- a/drivers/input/touchscreen/ili210x.c
> +++ b/drivers/input/touchscreen/ili210x.c
> @@ -19,10 +19,14 @@
>   #define ILI251X_DATA_SIZE1	31
>   #define ILI251X_DATA_SIZE2	20
>   
> +#define ILI_NAME_LEN		27
> +#define ILITEK_TS_NAME "Ilitek ILI%x%x Touchscreen"
> +
>   /* Touchscreen commands */
>   #define REG_TOUCHDATA		0x10
>   #define REG_PANEL_INFO		0x20
>   #define REG_CALIBRATE		0xcc
> +#define REG_TS_MODEL		0x61

Have a look at the following patch for the extra register names:
[PATCH v3 2/3] Input: ili210x - export ili251x version details via sysfs

>   struct ili2xxx_chip {
>   	int (*read_reg)(struct i2c_client *client, u8 reg,
> @@ -384,6 +388,8 @@ static int ili210x_i2c_probe(struct i2c_client *client,
>   	struct input_dev *input;
>   	int error;
>   	unsigned int max_xy;
> +	unsigned char buf[2];
> +	char *model_name;
>   
>   	dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
>   
> @@ -430,7 +436,10 @@ static int ili210x_i2c_probe(struct i2c_client *client,
>   	i2c_set_clientdata(client, priv);
>   
>   	/* Setup input device */
> -	input->name = "ILI210x Touchscreen";
> +	input->name = ILITEK_TS_NAME;
> +	model_name = (char *)input->name;
> +	priv->chip->read_reg(priv->client, REG_TS_MODEL, buf, 2);

Please check return value of ^ that function.

> +	snprintf(model_name, ILI_NAME_LEN, input->name, buf[1], buf[0]);
>   	input->id.bustype = BUS_I2C;

This was still tested only on ili2511, right ?