linux-kernel - Re: [PATCH NOT FOR MERGE 13/22] ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAGb2v66OHJREEg1Djkk=VyY0yUr5JE8Fp+xsb40wCk6E56bH8A@mail.gmail.com>
Date:   Sat, 11 Sep 2021 10:53:55 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Cc:     Linux Media Mailing List <linux-media@...r.kernel.org>,
        devicetree <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-sunxi@...ts.linux.dev,
        linux-kernel <linux-kernel@...r.kernel.org>,
        linux-phy@...ts.infradead.org,
        linux-clk <linux-clk@...r.kernel.org>,
        linux-staging@...ts.linux.dev, Yong Deng <yong.deng@...ewell.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Hans Verkuil <hans.verkuil@...co.com>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Helen Koike <helen.koike@...labora.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH NOT FOR MERGE 13/22] ARM: dts: sun8i: a83t: Add MIPI CSI-2
 controller node

Hi,

On Sat, Sep 11, 2021 at 2:42 AM Paul Kocialkowski
<paul.kocialkowski@...tlin.com> wrote:
>
> MIPI CSI-2 is supported on the A83T with a dedicated controller that
> covers both the protocol and D-PHY. It can be connected to the CSI
> interface as a V4L2 subdev through the fwnode graph.
>
> This is not done by default since connecting the bridge without a
> subdev attached to it will cause a failure on the CSI driver.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>

I believe you tagged the wrong patch to not be merged? AFAICT it
should be the next patch that hooks up OV8865, not this one.

> ---
>  arch/arm/boot/dts/sun8i-a83t.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index ac97eac91349..1fa51f7ef063 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -1064,6 +1064,32 @@ csi: camera@...0000 {
>                         status = "disabled";
>                 };
>
> +               mipi_csi2: csi@...1000 {
> +                       compatible = "allwinner,sun8i-a83t-mipi-csi2";
> +                       reg = <0x01cb1000 0x1000>;
> +                       interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&ccu CLK_BUS_CSI>,
> +                                <&ccu CLK_CSI_SCLK>,
> +                                <&ccu CLK_MIPI_CSI>,
> +                                <&ccu CLK_CSI_MISC>;
> +                       clock-names = "bus", "mod", "mipi", "misc";
> +                       resets = <&ccu RST_BUS_CSI>;
> +                       status = "disabled";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               mipi_csi2_in: port@0 {
> +                                       reg = <0>;
> +                               };
> +
> +                               mipi_csi2_out: port@1 {
> +                                       reg = <1>;
> +                               };
> +                       };
> +               };
> +
>                 hdmi: hdmi@...0000 {
>                         compatible = "allwinner,sun8i-a83t-dw-hdmi";
>                         reg = <0x01ee0000 0x10000>;
> --
> 2.32.0
>
>