linux-kernel - Re: [PATCHv3 2/3] EDAC/synopsys: add support for version 3 of the Synopsys EDAC DDR

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <99ddd699-5fa4-068b-4648-fe6d34a36b5d@xilinx.com>
Date:   Thu, 30 Sep 2021 11:28:27 +0200
From:   Michal Simek <michal.simek@...inx.com>
To:     Dinh Nguyen <dinguyen@...nel.org>, <michal.simek@...inx.com>
CC:     <bp@...en8.de>, <mchehab@...nel.org>, <tony.luck@...el.com>,
        <james.morse@....com>, <rric@...nel.org>,
        <linux-kernel@...r.kernel.org>, <linux-edac@...r.kernel.org>
Subject: Re: [PATCHv3 2/3] EDAC/synopsys: add support for version 3 of the
 Synopsys EDAC DDR



On 9/28/21 6:04 PM, Dinh Nguyen wrote:
> Adds support for version 3.80a of the Synopsys DDR controller with EDAC. This
> version of the controller has the following differences:
> 
> - UE/CE are auto cleared
> - Interrupts are supported by default
> 
> Signed-off-by: Dinh Nguyen <dinguyen@...nel.org>
> ---
> v3: Address comments from Michal Simek
>     use bit macro
>     removed extra "cleared" word from comment section about v3.0
> v2: remove "This patch" from commit message
> ---
>  drivers/edac/synopsys_edac.c | 49 ++++++++++++++++++++++++++++++------
>  1 file changed, 42 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
> index bf237fccb444..66ee37ea0acc 100644
> --- a/drivers/edac/synopsys_edac.c
> +++ b/drivers/edac/synopsys_edac.c
> @@ -101,6 +101,7 @@
>  /* DDR ECC Quirks */
>  #define DDR_ECC_INTR_SUPPORT		BIT(0)
>  #define DDR_ECC_DATA_POISON_SUPPORT	BIT(1)
> +#define DDR_ECC_INTR_SELF_CLEAR		BIT(2)
>  
>  /* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
>  /* ECC Configuration Registers */
> @@ -171,6 +172,10 @@
>  #define DDR_QOS_IRQ_EN_OFST		0x20208
>  #define DDR_QOS_IRQ_DB_OFST		0x2020C
>  
> +/* DDR QOS Interrupt register definitions */
> +#define DDR_UE_MASK			BIT(9)
> +#define DDR_CE_MASK			BIT(8)
> +
>  /* ECC Corrected Error Register Mask and Shifts*/
>  #define ECC_CEADDR0_RW_MASK		0x3FFFF
>  #define ECC_CEADDR0_RNK_MASK		BIT(24)
> @@ -533,10 +538,16 @@ static irqreturn_t intr_handler(int irq, void *dev_id)
>  	priv = mci->pvt_info;
>  	p_data = priv->p_data;
>  
> -	regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
> -	regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
> -	if (!(regval & ECC_CE_UE_INTR_MASK))
> -		return IRQ_NONE;
> +	/*
> +	 * v3.0 of the controller has the ce/ue bits cleared automatically,
> +	 * so this condition does not apply.
> +	 */
> +	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
> +		regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
> +		regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
> +		if (!(regval & ECC_CE_UE_INTR_MASK))
> +			return IRQ_NONE;
> +	}
>  
>  	status = p_data->get_error_info(priv);
>  	if (status)
> @@ -548,7 +559,9 @@ static irqreturn_t intr_handler(int irq, void *dev_id)
>  
>  	edac_dbg(3, "Total error count CE %d UE %d\n",
>  		 priv->ce_cnt, priv->ue_cnt);
> -	writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
> +	/* v3.0 of the controller does not have this register */
> +	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
> +		writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
>  	return IRQ_HANDLED;
>  }
>  
> @@ -834,8 +847,13 @@ static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev)
>  static void enable_intr(struct synps_edac_priv *priv)
>  {
>  	/* Enable UE/CE Interrupts */
> -	writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
> -			priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
> +	if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
> +		writel(DDR_UE_MASK | DDR_CE_MASK,
> +		       priv->baseaddr + ECC_CLR_OFST);
> +	else
> +		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
> +		       priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
> +
>  }
>  
>  static void disable_intr(struct synps_edac_priv *priv)
> @@ -890,6 +908,19 @@ static const struct synps_platform_data zynqmp_edac_def = {
>  			  ),
>  };
>  
> +static const struct synps_platform_data synopsys_edac_def = {
> +	.get_error_info	= zynqmp_get_error_info,
> +	.get_mtype	= zynqmp_get_mtype,
> +	.get_dtype	= zynqmp_get_dtype,
> +	.get_ecc_state	= zynqmp_get_ecc_state,
> +	.quirks         = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR
> +#ifdef CONFIG_EDAC_DEBUG
> +			  | DDR_ECC_DATA_POISON_SUPPORT
> +#endif
> +			  ),
> +};
> +
> +
>  static const struct of_device_id synps_edac_match[] = {
>  	{
>  		.compatible = "xlnx,zynq-ddrc-a05",
> @@ -899,6 +930,10 @@ static const struct of_device_id synps_edac_match[] = {
>  		.compatible = "xlnx,zynqmp-ddrc-2.40a",
>  		.data = (void *)&zynqmp_edac_def
>  	},
> +	{
> +		.compatible = "snps,ddrc-3.80a",
> +		.data = (void *)&synopsys_edac_def
> +	},
>  	{
>  		/* end of table */
>  	}
> 
Reviewed-by: Michal Simek <michal.simek@...inx.com>

Thanks,
Michal