lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <ba79bae65a1955cd7f7e005f352b1b32799a1781.1633369560.git.naveennaidu479@gmail.com>
Date:   Mon,  4 Oct 2021 23:29:30 +0530
From:   Naveen Naidu <naveennaidu479@...il.com>
To:     bhelgaas@...gle.com, tsbogend@...ha.franken.de
Cc:     Naveen Naidu <naveennaidu479@...il.com>,
        linux-kernel-mentees@...ts.linuxfoundation.org,
        skhan@...uxfoundation.org, linux-kernel@...r.kernel.org,
        linux-pci@...r.kernel.org, linux-mips@...r.kernel.org
Subject: [PATCH 4/6] MIPS: OCTEON: Remove redundant enable of COR/UNCOR error

e8635b484f64 ("MIPS: Add Cavium OCTEON PCI support.") added MIPS
specific code to enable PCIe and AER error reporting (*irrespective
of CONFIG_PCIEAER value*) because PCI core didn't do that at the time.

Currently when CONFIG_PCIEAER=y, correctable/uncorrectable errors
are enabled by set_device_error_reporting() in the aer_probe()
path.

It is now no longer necessary for Octeon code to enable PCIe COR/UNCOR
errors since it's done when PCIe bus loads the AER service driver.

Signed-off-by: Naveen Naidu <naveennaidu479@...il.com>
---
 arch/mips/pci/pci-octeon.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 2c251018075c..a82cf48f00ab 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -117,18 +117,13 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	/* Find the Advanced Error Reporting capability */
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 	if (pos) {
-		/* Enable reporting of all uncorrectable errors */
-		/* Uncorrectable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
 		/*
 		 * Leave severity at HW default. This only controls if
 		 * errors are reported as uncorrectable or
 		 * correctable, not if the error is reported.
 		 */
 		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-		/* Enable reporting of all correctable errors */
-		/* Correctable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+
 		/* Advanced Error Capabilities */
 		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
 		/* ECRC Generation Enable */
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ