[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAE-0n507Nci+7MCJWSqxU=MPjrZLn5VMJq1BdceFmvp2AN6F=A@mail.gmail.com>
Date: Tue, 5 Oct 2021 16:35:32 -0700
From: Stephen Boyd <swboyd@...omium.org>
To: khsieh@...eaurora.org
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
Abhinav Kumar <abhinavk@...eaurora.org>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Sankeerth Billakanti <sbillaka@...eaurora.org>
Subject: Re: [PATCH] drm/msm/dp: Shorten SETUP timeout
Quoting khsieh@...eaurora.org (2021-10-05 16:04:40)
> On 2021-10-05 15:36, Stephen Boyd wrote:
> > Quoting Bjorn Andersson (2021-10-05 14:40:38)
> >> On Tue 05 Oct 11:45 PDT 2021, Stephen Boyd wrote:
> >>
> >> > Quoting Bjorn Andersson (2021-10-04 19:37:50)
> >> > > Found in the middle of a patch from Sankeerth was the reduction of the
> >> > > INIT_SETUP timeout from 10s to 100ms. Upon INIT_SETUP timeout the host
> >> > > is initalized and HPD interrupt start to be serviced, so in the case of
> >> > > eDP this reduction improves the user experience dramatically - i.e.
> >> > > removes 9.9s of bland screen time at boot.
> >> > >
> >> > > Suggested-by: Sankeerth Billakanti <sbillaka@...eaurora.org>
> >> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> >> > > ---
> >> >
> >> > Any Fixes tag? BTW, the delay design is pretty convoluted. I had to go
> >> > re-read the code a couple times to understand that it's waiting 100ms
> >> > times the 'delay' number. Whaaaaat?
> >> >
> >>
> >> I assume you're happy with the current 10s delay on the current
> >> devices, so I don't think we should push for this to be backported.
> >> I have no need for it to be backported on my side at least.
> >>
> >
> > Sure. Fixes tag != backported to stable trees but it is close.
> >
> >> > Reviewed-by: Stephen Boyd <swboyd@...omium.org>
> >>
> dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1); <== to 100ms
>
> This patch will prevent usb3 from working due to dp driver initialize
> phy earlier than usb3 which cause timeout error at power up usb3 phy
> when both edp and dp are enabled.
That sounds pretty bad.
> I had prepared a patch (drm/msm/dp: do not initialize combo phy until
> plugin interrupt) to fix this problem.
Great! When were you planning to report this problem on the list?
> Unfortunately, my patch is depend on Bjorn's patch (PATCH v3 3/5]
> drm/msm/dp: Support up to 3 DP controllers).
> I will submit my patch for review once Bjorn's patches merged in.
> Therefore I would think this patch should go after both Bjorn's patches
> and my patch.
>
Why can't you send it now? Point to the other patch series as a
dependency.
Powered by blists - more mailing lists