| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2b4392d1-5760-8815-3961-ec63a3053a4a@samsung.com>
Date: Fri, 15 Oct 2021 10:17:11 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Sam Protsenko <semen.protsenko@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Paweł Chmiel <pawel.mikolaj.chmiel@...il.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>
Cc: Ryu Euiyoul <ryu.real@...sung.com>, Tom Gall <tom.gall@...aro.org>,
Sumit Semwal <sumit.semwal@...aro.org>,
John Stultz <john.stultz@...aro.org>,
Amit Pundir <amit.pundir@...aro.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Subject: Re: [PATCH v3 5/5] clk: samsung: Introduce Exynos850 clock driver
On 10/9/21 12:43 AM, Sam Protsenko wrote:
> This is the initial implementation adding only basic clocks like UART,
> MMC, I2C and corresponding parent clocks. Design is influenced by
> Exynos5433 clock driver.
>
> Bus clock is enabled by default (in probe function) for all CMUs except
> CMU_TOP, the reasoning is as follows. By default if bus clock has no
> users its "enable count" value is 0. It might be actually running if
> it's already enabled in bootloader, but then in some cases it can be
> disabled by mistake. For example, such case was observed when
> dw_mci_probe() enabled the bus clock, then failed to do something and
> disabled that bus clock on error path. After that, even the attempt to
> read the 'clk_summary' file in DebugFS freezed forever, as CMU bus clock
> ended up being disabled and it wasn't possible to access CMU registers
> anymore.
>
> To avoid such cases, CMU driver must increment the ref count for that
> bus clock by running clk_prepare_enable(). There is already existing
> '.clk_name' field in struct samsung_cmu_info, exactly for that reason.
> It was added in commit 523d3de41f02 ("clk: samsung: exynos5433: Add
> support for runtime PM"), with next mentioning in commit message:
>
> > Also for each CMU there is one special parent clock, which has to be
> > enabled all the time when any access to CMU registers is being done.
>
> But that clock is actually only enabled in Exynos5433 clock driver right
> now. So the same code is added to exynos850_cmu_probe() function,
> As was described above, it might be helpful not only for PM reasons, but
> also to prevent possible erroneous clock gating on error paths.
>
> Another way to workaround that issue would be to use CLOCK_IS_CRITICAL
> flag for corresponding gate clocks. But that might be not very good
> design decision, as we might still want to disable that bus clock, e.g.
> on PM suspend.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@...aro.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
> ---
> Changes in v3:
> - Added R-b tag by Krzysztof Kozlowski
>
> Changes in v2:
> - Used of_iomap() for the whole CMU range instead of ioremap() in
> exynos850_init_clocks()
> - Used readl/writel functions in exynos850_init_clocks() for consistency
> with other drivers
> - Added all clock ids
> - Added CMU_DPU
> - Implemented platform_driver for all Power Domain capable CMUs
> - Moved bus clock enablement code here to probe function
> - Used clk_get() instead of __clk_lookup()
>
> drivers/clk/samsung/Makefile | 1 +
> drivers/clk/samsung/clk-exynos850.c | 835 ++++++++++++++++++++++++++++
> 2 files changed, 836 insertions(+)
> create mode 100644 drivers/clk/samsung/clk-exynos850.c
>
> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> index 028b2e27a37e..c46cf11e4d0b 100644
> --- a/drivers/clk/samsung/Makefile
> +++ b/drivers/clk/samsung/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos5433.o
> obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
> obj-$(CONFIG_EXYNOS_CLKOUT) += clk-exynos-clkout.o
> obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7.o
> +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos850.o
> obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
> obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
> obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
> diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
> new file mode 100644
> index 000000000000..2294989e244c
> --- /dev/null
> +++ b/drivers/clk/samsung/clk-exynos850.c
> @@ -0,0 +1,835 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2021 Linaro Ltd.
> + * Author: Sam Protsenko <semen.protsenko@...aro.org>
> + *
> + * Common Clock Framework support for Exynos850 SoC.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +
> +#include <dt-bindings/clock/exynos850.h>
> +
> +#include "clk.h"
> +
> +/* Gate register bits */
> +#define GATE_MANUAL BIT(20)
> +#define GATE_ENABLE_HWACG BIT(28)
> +
> +/* Gate register offsets range */
> +#define GATE_OFF_START 0x2000
> +#define GATE_OFF_END 0x2fff
> +
> +/**
> + * exynos850_init_clocks - Set clocks initial configuration
> + * @np: CMU device tree node with "reg" property (CMU addr)
> + * @reg_offs: Register offsets array for clocks to init
> + * @reg_offs_len: Number of register offsets in reg_offs array
> + *
> + * Set manual control mode for all gate clocks.
> + */
> +static void __init exynos850_init_clocks(struct device_node *np,
> + const unsigned long *reg_offs, size_t reg_offs_len)
> +{
> + void __iomem *reg_base;
> + size_t i;
> +
> + reg_base = of_iomap(np, 0);
> + if (!reg_base)
> + panic("%s: failed to map registers\n", __func__);
> +
> + for (i = 0; i < reg_offs_len; ++i) {
> + void __iomem *reg = reg_base + reg_offs[i];
> + u32 val;
> +
> + /* Modify only gate clock registers */
> + if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
> + continue;
> +
> + val = readl(reg);
> + val |= GATE_MANUAL;
> + val &= ~GATE_ENABLE_HWACG;
> + writel(val, reg);
> + }
> +
> + iounmap(reg_base);
> +}
> +
> +/* ---- CMU_TOP ------------------------------------------------------------- */
> +
> +/* Register Offset definitions for CMU_TOP (0x120e0000) */
> +#define PLL_LOCKTIME_PLL_MMC 0x0000
> +#define PLL_LOCKTIME_PLL_SHARED0 0x0004
> +#define PLL_LOCKTIME_PLL_SHARED1 0x0008
> +#define PLL_CON0_PLL_MMC 0x0100
> +#define PLL_CON3_PLL_MMC 0x010c
> +#define PLL_CON0_PLL_SHARED0 0x0140
> +#define PLL_CON3_PLL_SHARED0 0x014c
> +#define PLL_CON0_PLL_SHARED1 0x0180
> +#define PLL_CON3_PLL_SHARED1 0x018c
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_BUS 0x1014
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_CCI 0x1018
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD 0x101c
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_SSS 0x1020
> +#define CLK_CON_MUX_MUX_CLKCMU_DPU 0x1034
> +#define CLK_CON_MUX_MUX_CLKCMU_HSI_BUS 0x103c
> +#define CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD 0x1040
> +#define CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD 0x1044
> +#define CLK_CON_MUX_MUX_CLKCMU_PERI_BUS 0x1070
> +#define CLK_CON_MUX_MUX_CLKCMU_PERI_IP 0x1074
> +#define CLK_CON_MUX_MUX_CLKCMU_PERI_UART 0x1078
> +#define CLK_CON_DIV_CLKCMU_CORE_BUS 0x1820
> +#define CLK_CON_DIV_CLKCMU_CORE_CCI 0x1824
> +#define CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD 0x1828
> +#define CLK_CON_DIV_CLKCMU_CORE_SSS 0x182c
> +#define CLK_CON_DIV_CLKCMU_DPU 0x1840
> +#define CLK_CON_DIV_CLKCMU_HSI_BUS 0x1848
> +#define CLK_CON_DIV_CLKCMU_HSI_MMC_CARD 0x184c
> +#define CLK_CON_DIV_CLKCMU_HSI_USB20DRD 0x1850
> +#define CLK_CON_DIV_CLKCMU_PERI_BUS 0x187c
> +#define CLK_CON_DIV_CLKCMU_PERI_IP 0x1880
> +#define CLK_CON_DIV_CLKCMU_PERI_UART 0x1884
> +#define CLK_CON_DIV_PLL_SHARED0_DIV2 0x188c
> +#define CLK_CON_DIV_PLL_SHARED0_DIV3 0x1890
> +#define CLK_CON_DIV_PLL_SHARED0_DIV4 0x1894
> +#define CLK_CON_DIV_PLL_SHARED1_DIV2 0x1898
> +#define CLK_CON_DIV_PLL_SHARED1_DIV3 0x189c
> +#define CLK_CON_DIV_PLL_SHARED1_DIV4 0x18a0
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_BUS 0x201c
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_CCI 0x2020
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD 0x2024
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_SSS 0x2028
> +#define CLK_CON_GAT_GATE_CLKCMU_DPU 0x203c
> +#define CLK_CON_GAT_GATE_CLKCMU_HSI_BUS 0x2044
> +#define CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD 0x2048
> +#define CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD 0x204c
> +#define CLK_CON_GAT_GATE_CLKCMU_PERI_BUS 0x2080
> +#define CLK_CON_GAT_GATE_CLKCMU_PERI_IP 0x2084
> +#define CLK_CON_GAT_GATE_CLKCMU_PERI_UART 0x2088
> +
> +static const unsigned long top_clk_regs[] __initconst = {
> + PLL_LOCKTIME_PLL_MMC,
> + PLL_LOCKTIME_PLL_SHARED0,
> + PLL_LOCKTIME_PLL_SHARED1,
> + PLL_CON0_PLL_MMC,
> + PLL_CON3_PLL_MMC,
> + PLL_CON0_PLL_SHARED0,
> + PLL_CON3_PLL_SHARED0,
> + PLL_CON0_PLL_SHARED1,
> + PLL_CON3_PLL_SHARED1,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_BUS,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_CCI,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_SSS,
> + CLK_CON_MUX_MUX_CLKCMU_DPU,
> + CLK_CON_MUX_MUX_CLKCMU_HSI_BUS,
> + CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD,
> + CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD,
> + CLK_CON_MUX_MUX_CLKCMU_PERI_BUS,
> + CLK_CON_MUX_MUX_CLKCMU_PERI_IP,
> + CLK_CON_MUX_MUX_CLKCMU_PERI_UART,
> + CLK_CON_DIV_CLKCMU_CORE_BUS,
> + CLK_CON_DIV_CLKCMU_CORE_CCI,
> + CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD,
> + CLK_CON_DIV_CLKCMU_CORE_SSS,
> + CLK_CON_DIV_CLKCMU_DPU,
> + CLK_CON_DIV_CLKCMU_HSI_BUS,
> + CLK_CON_DIV_CLKCMU_HSI_MMC_CARD,
> + CLK_CON_DIV_CLKCMU_HSI_USB20DRD,
> + CLK_CON_DIV_CLKCMU_PERI_BUS,
> + CLK_CON_DIV_CLKCMU_PERI_IP,
> + CLK_CON_DIV_CLKCMU_PERI_UART,
> + CLK_CON_DIV_PLL_SHARED0_DIV2,
> + CLK_CON_DIV_PLL_SHARED0_DIV3,
> + CLK_CON_DIV_PLL_SHARED0_DIV4,
> + CLK_CON_DIV_PLL_SHARED1_DIV2,
> + CLK_CON_DIV_PLL_SHARED1_DIV3,
> + CLK_CON_DIV_PLL_SHARED1_DIV4,
> + CLK_CON_GAT_GATE_CLKCMU_CORE_BUS,
> + CLK_CON_GAT_GATE_CLKCMU_CORE_CCI,
> + CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD,
> + CLK_CON_GAT_GATE_CLKCMU_CORE_SSS,
> + CLK_CON_GAT_GATE_CLKCMU_DPU,
> + CLK_CON_GAT_GATE_CLKCMU_HSI_BUS,
> + CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD,
> + CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD,
> + CLK_CON_GAT_GATE_CLKCMU_PERI_BUS,
> + CLK_CON_GAT_GATE_CLKCMU_PERI_IP,
> + CLK_CON_GAT_GATE_CLKCMU_PERI_UART,
> +};
> +
> +/*
> + * Do not provide PLL tables to core PLLs, as MANUAL_PLL_CTRL bit is not set
> + * for those PLLs by default, so set_rate operation would fail.
> + */
> +static const struct samsung_pll_clock top_pll_clks[] __initconst = {
> + /* CMU_TOP_PURECLKCOMP */
> + PLL(pll_0822x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
> + PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0,
> + NULL),
> + PLL(pll_0822x, CLK_FOUT_SHARED1_PLL, "fout_shared1_pll", "oscclk",
> + PLL_LOCKTIME_PLL_SHARED1, PLL_CON3_PLL_SHARED1,
> + NULL),
> + PLL(pll_0831x, CLK_FOUT_MMC_PLL, "fout_mmc_pll", "oscclk",
> + PLL_LOCKTIME_PLL_MMC, PLL_CON3_PLL_MMC, NULL),
> +};
> +
> +/* List of parent clocks for Muxes in CMU_TOP */
> +PNAME(mout_shared0_pll_p) = { "oscclk", "fout_shared0_pll" };
> +PNAME(mout_shared1_pll_p) = { "oscclk", "fout_shared1_pll" };
> +PNAME(mout_mmc_pll_p) = { "oscclk", "fout_mmc_pll" };
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_CORE */
> +PNAME(mout_core_bus_p) = { "dout_shared1_div2", "dout_shared0_div3",
> + "dout_shared1_div3", "dout_shared0_div4" };
> +PNAME(mout_core_cci_p) = { "dout_shared0_div2", "dout_shared1_div2",
> + "dout_shared0_div3", "dout_shared1_div3" };
> +PNAME(mout_core_mmc_embd_p) = { "oscclk", "dout_shared0_div2",
> + "dout_shared1_div2", "dout_shared0_div3",
> + "dout_shared1_div3", "mout_mmc_pll",
> + "oscclk", "oscclk" };
> +PNAME(mout_core_sss_p) = { "dout_shared0_div3", "dout_shared1_div3",
> + "dout_shared0_div4", "dout_shared1_div4" };
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_HSI */
> +PNAME(mout_hsi_bus_p) = { "dout_shared0_div2", "dout_shared1_div2" };
> +PNAME(mout_hsi_mmc_card_p) = { "oscclk", "dout_shared0_div2",
> + "dout_shared1_div2", "dout_shared0_div3",
> + "dout_shared1_div3", "mout_mmc_pll",
> + "oscclk", "oscclk" };
> +PNAME(mout_hsi_usb20drd_p) = { "oscclk", "dout_shared0_div4",
> + "dout_shared1_div4", "oscclk" };
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_PERI */
> +PNAME(mout_peri_bus_p) = { "dout_shared0_div4", "dout_shared1_div4" };
> +PNAME(mout_peri_uart_p) = { "oscclk", "dout_shared0_div4",
> + "dout_shared1_div4", "oscclk" };
> +PNAME(mout_peri_ip_p) = { "oscclk", "dout_shared0_div4",
> + "dout_shared1_div4", "oscclk" };
> +
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_DPU */
> +PNAME(mout_dpu_p) = { "dout_shared0_div3", "dout_shared1_div3",
> + "dout_shared0_div4", "dout_shared1_div4" };
> +
> +static const struct samsung_mux_clock top_mux_clks[] __initconst = {
> + /* CMU_TOP_PURECLKCOMP */
> + MUX(CLK_MOUT_SHARED0_PLL, "mout_shared0_pll", mout_shared0_pll_p,
> + PLL_CON0_PLL_SHARED0, 4, 1),
> + MUX(CLK_MOUT_SHARED1_PLL, "mout_shared1_pll", mout_shared1_pll_p,
> + PLL_CON0_PLL_SHARED1, 4, 1),
> + MUX(CLK_MOUT_MMC_PLL, "mout_mmc_pll", mout_mmc_pll_p,
> + PLL_CON0_PLL_MMC, 4, 1),
> +
> + /* CORE */
> + MUX(CLK_MOUT_CORE_BUS, "mout_core_bus", mout_core_bus_p,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_BUS, 0, 2),
> + MUX(CLK_MOUT_CORE_CCI, "mout_core_cci", mout_core_cci_p,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_CCI, 0, 2),
> + MUX(CLK_MOUT_CORE_MMC_EMBD, "mout_core_mmc_embd", mout_core_mmc_embd_p,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD, 0, 3),
> + MUX(CLK_MOUT_CORE_SSS, "mout_core_sss", mout_core_sss_p,
> + CLK_CON_MUX_MUX_CLKCMU_CORE_SSS, 0, 2),
> +
> + /* DPU */
> + MUX(CLK_MOUT_DPU, "mout_dpu", mout_dpu_p,
> + CLK_CON_MUX_MUX_CLKCMU_DPU, 0, 2),
> +
> + /* HSI */
> + MUX(CLK_MOUT_HSI_BUS, "mout_hsi_bus", mout_hsi_bus_p,
> + CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, 0, 1),
> + MUX(CLK_MOUT_HSI_MMC_CARD, "mout_hsi_mmc_card", mout_hsi_mmc_card_p,
> + CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD, 0, 3),
> + MUX(CLK_MOUT_HSI_USB20DRD, "mout_hsi_usb20drd", mout_hsi_usb20drd_p,
> + CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD, 0, 2),
> +
> + /* PERI */
> + MUX(CLK_MOUT_PERI_BUS, "mout_peri_bus", mout_peri_bus_p,
> + CLK_CON_MUX_MUX_CLKCMU_PERI_BUS, 0, 1),
> + MUX(CLK_MOUT_PERI_UART, "mout_peri_uart", mout_peri_uart_p,
> + CLK_CON_MUX_MUX_CLKCMU_PERI_UART, 0, 2),
> + MUX(CLK_MOUT_PERI_IP, "mout_peri_ip", mout_peri_ip_p,
> + CLK_CON_MUX_MUX_CLKCMU_PERI_IP, 0, 2),
> +};
> +
> +static const struct samsung_div_clock top_div_clks[] __initconst = {
> + /* CMU_TOP_PURECLKCOMP */
> + DIV(CLK_DOUT_SHARED0_DIV3, "dout_shared0_div3", "mout_shared0_pll",
> + CLK_CON_DIV_PLL_SHARED0_DIV3, 0, 2),
> + DIV(CLK_DOUT_SHARED0_DIV2, "dout_shared0_div2", "mout_shared0_pll",
> + CLK_CON_DIV_PLL_SHARED0_DIV2, 0, 1),
> + DIV(CLK_DOUT_SHARED1_DIV3, "dout_shared1_div3", "mout_shared1_pll",
> + CLK_CON_DIV_PLL_SHARED1_DIV3, 0, 2),
> + DIV(CLK_DOUT_SHARED1_DIV2, "dout_shared1_div2", "mout_shared1_pll",
> + CLK_CON_DIV_PLL_SHARED1_DIV2, 0, 1),
> + DIV(CLK_DOUT_SHARED0_DIV4, "dout_shared0_div4", "dout_shared0_div2",
> + CLK_CON_DIV_PLL_SHARED0_DIV4, 0, 1),
> + DIV(CLK_DOUT_SHARED1_DIV4, "dout_shared1_div4", "dout_shared1_div2",
> + CLK_CON_DIV_PLL_SHARED1_DIV4, 0, 1),
> +
> + /* CORE */
> + DIV(CLK_DOUT_CORE_BUS, "dout_core_bus", "gout_core_bus",
> + CLK_CON_DIV_CLKCMU_CORE_BUS, 0, 4),
> + DIV(CLK_DOUT_CORE_CCI, "dout_core_cci", "gout_core_cci",
> + CLK_CON_DIV_CLKCMU_CORE_CCI, 0, 4),
> + DIV(CLK_DOUT_CORE_MMC_EMBD, "dout_core_mmc_embd", "gout_core_mmc_embd",
> + CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD, 0, 9),
> + DIV(CLK_DOUT_CORE_SSS, "dout_core_sss", "gout_core_sss",
> + CLK_CON_DIV_CLKCMU_CORE_SSS, 0, 4),
> +
> + /* DPU */
> + DIV(CLK_DOUT_DPU, "dout_dpu", "gout_dpu",
> + CLK_CON_DIV_CLKCMU_DPU, 0, 4),
> +
> + /* HSI */
> + DIV(CLK_DOUT_HSI_BUS, "dout_hsi_bus", "gout_hsi_bus",
> + CLK_CON_DIV_CLKCMU_HSI_BUS, 0, 4),
> + DIV(CLK_DOUT_HSI_MMC_CARD, "dout_hsi_mmc_card", "gout_hsi_mmc_card",
> + CLK_CON_DIV_CLKCMU_HSI_MMC_CARD, 0, 9),
> + DIV(CLK_DOUT_HSI_USB20DRD, "dout_hsi_usb20drd", "gout_hsi_usb20drd",
> + CLK_CON_DIV_CLKCMU_HSI_USB20DRD, 0, 4),
> +
> + /* PERI */
> + DIV(CLK_DOUT_PERI_BUS, "dout_peri_bus", "gout_peri_bus",
> + CLK_CON_DIV_CLKCMU_PERI_BUS, 0, 4),
> + DIV(CLK_DOUT_PERI_UART, "dout_peri_uart", "gout_peri_uart",
> + CLK_CON_DIV_CLKCMU_PERI_UART, 0, 4),
> + DIV(CLK_DOUT_PERI_IP, "dout_peri_ip", "gout_peri_ip",
> + CLK_CON_DIV_CLKCMU_PERI_IP, 0, 4),
> +};
> +
> +static const struct samsung_gate_clock top_gate_clks[] __initconst = {
> + /* CORE */
> + GATE(CLK_GOUT_CORE_BUS, "gout_core_bus", "mout_core_bus",
> + CLK_CON_GAT_GATE_CLKCMU_CORE_BUS, 21, 0, 0),
> + GATE(CLK_GOUT_CORE_CCI, "gout_core_cci", "mout_core_cci",
> + CLK_CON_GAT_GATE_CLKCMU_CORE_CCI, 21, 0, 0),
> + GATE(CLK_GOUT_CORE_MMC_EMBD, "gout_core_mmc_embd", "mout_core_mmc_embd",
> + CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD, 21, 0, 0),
> + GATE(CLK_GOUT_CORE_SSS, "gout_core_sss", "mout_core_sss",
> + CLK_CON_GAT_GATE_CLKCMU_CORE_SSS, 21, 0, 0),
> +
> + /* DPU */
> + GATE(CLK_GOUT_DPU, "gout_dpu", "mout_dpu",
> + CLK_CON_GAT_GATE_CLKCMU_DPU, 21, 0, 0),
> +
> + /* HSI */
> + GATE(CLK_GOUT_HSI_BUS, "gout_hsi_bus", "mout_hsi_bus",
> + CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, 21, 0, 0),
> + GATE(CLK_GOUT_HSI_MMC_CARD, "gout_hsi_mmc_card", "mout_hsi_mmc_card",
> + CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD, 21, 0, 0),
> + GATE(CLK_GOUT_HSI_USB20DRD, "gout_hsi_usb20drd", "mout_hsi_usb20drd",
> + CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD, 21, 0, 0),
> +
> + /* PERI */
> + GATE(CLK_GOUT_PERI_BUS, "gout_peri_bus", "mout_peri_bus",
> + CLK_CON_GAT_GATE_CLKCMU_PERI_BUS, 21, 0, 0),
> + GATE(CLK_GOUT_PERI_UART, "gout_peri_uart", "mout_peri_uart",
> + CLK_CON_GAT_GATE_CLKCMU_PERI_UART, 21, 0, 0),
> + GATE(CLK_GOUT_PERI_IP, "gout_peri_ip", "mout_peri_ip",
> + CLK_CON_GAT_GATE_CLKCMU_PERI_IP, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info top_cmu_info __initconst = {
> + .pll_clks = top_pll_clks,
> + .nr_pll_clks = ARRAY_SIZE(top_pll_clks),
> + .mux_clks = top_mux_clks,
> + .nr_mux_clks = ARRAY_SIZE(top_mux_clks),
> + .div_clks = top_div_clks,
> + .nr_div_clks = ARRAY_SIZE(top_div_clks),
> + .gate_clks = top_gate_clks,
> + .nr_gate_clks = ARRAY_SIZE(top_gate_clks),
> + .nr_clk_ids = TOP_NR_CLK,
> + .clk_regs = top_clk_regs,
> + .nr_clk_regs = ARRAY_SIZE(top_clk_regs),
> +};
> +
> +static void __init exynos850_cmu_top_init(struct device_node *np)
> +{
> + exynos850_init_clocks(np, top_clk_regs, ARRAY_SIZE(top_clk_regs));
> + samsung_cmu_register_one(np, &top_cmu_info);
> +}
> +
> +CLK_OF_DECLARE(exynos850_cmu_top, "samsung,exynos850-cmu-top",
> + exynos850_cmu_top_init);
> +
> +/* ---- CMU_HSI ------------------------------------------------------------- */
> +
> +/* Register Offset definitions for CMU_HSI (0x13400000) */
> +#define PLL_CON0_MUX_CLKCMU_HSI_BUS_USER 0x0600
> +#define PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER 0x0610
> +#define PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER 0x0620
> +#define CLK_CON_MUX_MUX_CLK_HSI_RTC 0x1000
> +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV 0x2008
> +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50 0x200c
> +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26 0x2010
> +#define CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK 0x2018
> +#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK 0x2024
> +#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN 0x2028
> +#define CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK 0x2038
> +#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20 0x203c
> +#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY 0x2040
> +
> +static const unsigned long hsi_clk_regs[] __initconst = {
> + PLL_CON0_MUX_CLKCMU_HSI_BUS_USER,
> + PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
> + PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
> + CLK_CON_MUX_MUX_CLK_HSI_RTC,
> + CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV,
> + CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50,
> + CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26,
> + CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK,
> + CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK,
> + CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN,
> + CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK,
> + CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20,
> + CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_PERI */
> +PNAME(mout_hsi_bus_user_p) = { "oscclk", "dout_hsi_bus" };
> +PNAME(mout_hsi_mmc_card_user_p) = { "oscclk", "dout_hsi_mmc_card" };
> +PNAME(mout_hsi_usb20drd_user_p) = { "oscclk", "dout_hsi_usb20drd" };
> +PNAME(mout_hsi_rtc_p) = { "rtcclk", "oscclk" };
> +
> +static const struct samsung_mux_clock hsi_mux_clks[] __initconst = {
> + MUX(CLK_MOUT_HSI_BUS_USER, "mout_hsi_bus_user", mout_hsi_bus_user_p,
> + PLL_CON0_MUX_CLKCMU_HSI_BUS_USER, 4, 1),
> + MUX_F(CLK_MOUT_HSI_MMC_CARD_USER, "mout_hsi_mmc_card_user",
> + mout_hsi_mmc_card_user_p, PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
> + 4, 1, CLK_SET_RATE_PARENT, 0),
> + MUX(CLK_MOUT_HSI_USB20DRD_USER, "mout_hsi_usb20drd_user",
> + mout_hsi_usb20drd_user_p, PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
> + 4, 1),
> + MUX(CLK_MOUT_HSI_RTC, "mout_hsi_rtc", mout_hsi_rtc_p,
> + CLK_CON_MUX_MUX_CLK_HSI_RTC, 0, 1),
> +};
> +
> +static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
> + GATE(CLK_GOUT_USB_RTC_CLK, "gout_usb_rtc", "mout_hsi_rtc",
> + CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV, 21, 0, 0),
> + GATE(CLK_GOUT_USB_REF_CLK, "gout_usb_ref", "mout_hsi_usb20drd_user",
> + CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50, 21, 0, 0),
> + GATE(CLK_GOUT_USB_PHY_REF_CLK, "gout_usb_phy_ref", "oscclk",
> + CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26, 21, 0, 0),
> + GATE(CLK_GOUT_GPIO_HSI_PCLK, "gout_gpio_hsi_pclk", "mout_hsi_bus_user",
> + CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_MMC_CARD_ACLK, "gout_mmc_card_aclk", "mout_hsi_bus_user",
> + CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK, 21, 0, 0),
> + GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
> + "mout_hsi_mmc_card_user",
> + CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN, 21, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_GOUT_SYSREG_HSI_PCLK, "gout_sysreg_hsi_pclk",
> + "mout_hsi_bus_user",
> + CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_USB_PHY_ACLK, "gout_usb_phy_aclk", "mout_hsi_bus_user",
> + CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20, 21, 0, 0),
> + GATE(CLK_GOUT_USB_BUS_EARLY_CLK, "gout_usb_bus_early",
> + "mout_hsi_bus_user",
> + CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info hsi_cmu_info __initconst = {
> + .mux_clks = hsi_mux_clks,
> + .nr_mux_clks = ARRAY_SIZE(hsi_mux_clks),
> + .gate_clks = hsi_gate_clks,
> + .nr_gate_clks = ARRAY_SIZE(hsi_gate_clks),
> + .nr_clk_ids = HSI_NR_CLK,
> + .clk_regs = hsi_clk_regs,
> + .nr_clk_regs = ARRAY_SIZE(hsi_clk_regs),
> + .clk_name = "dout_hsi_bus",
> +};
> +
> +/* ---- CMU_PERI ------------------------------------------------------------ */
> +
> +/* Register Offset definitions for CMU_PERI (0x10030000) */
> +#define PLL_CON0_MUX_CLKCMU_PERI_BUS_USER 0x0600
> +#define PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER 0x0610
> +#define PLL_CON0_MUX_CLKCMU_PERI_SPI_USER 0x0620
> +#define PLL_CON0_MUX_CLKCMU_PERI_UART_USER 0x0630
> +#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0 0x1800
> +#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1 0x1804
> +#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2 0x1808
> +#define CLK_CON_DIV_DIV_CLK_PERI_SPI_0 0x180c
> +#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0 0x200c
> +#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1 0x2010
> +#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2 0x2014
> +#define CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK 0x2020
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK 0x2024
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK 0x2028
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK 0x202c
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK 0x2030
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK 0x2034
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK 0x2038
> +#define CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK 0x203c
> +#define CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK 0x2040
> +#define CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK 0x2044
> +#define CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK 0x2048
> +#define CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK 0x204c
> +#define CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK 0x2050
> +#define CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK 0x2054
> +#define CLK_CON_GAT_GOUT_PERI_MCT_PCLK 0x205c
> +#define CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK 0x2064
> +#define CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK 0x209c
> +#define CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK 0x20a0
> +#define CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK 0x20a4
> +#define CLK_CON_GAT_GOUT_PERI_UART_IPCLK 0x20a8
> +#define CLK_CON_GAT_GOUT_PERI_UART_PCLK 0x20ac
> +#define CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK 0x20b0
> +#define CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK 0x20b4
> +
> +static const unsigned long peri_clk_regs[] __initconst = {
> + PLL_CON0_MUX_CLKCMU_PERI_BUS_USER,
> + PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER,
> + PLL_CON0_MUX_CLKCMU_PERI_SPI_USER,
> + PLL_CON0_MUX_CLKCMU_PERI_UART_USER,
> + CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0,
> + CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1,
> + CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2,
> + CLK_CON_DIV_DIV_CLK_PERI_SPI_0,
> + CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0,
> + CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1,
> + CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2,
> + CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK,
> + CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK,
> + CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK,
> + CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK,
> + CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK,
> + CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK,
> + CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK,
> + CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK,
> + CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK,
> + CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK,
> + CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK,
> + CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK,
> + CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK,
> + CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK,
> + CLK_CON_GAT_GOUT_PERI_MCT_PCLK,
> + CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK,
> + CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK,
> + CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK,
> + CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK,
> + CLK_CON_GAT_GOUT_PERI_UART_IPCLK,
> + CLK_CON_GAT_GOUT_PERI_UART_PCLK,
> + CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK,
> + CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_PERI */
> +PNAME(mout_peri_bus_user_p) = { "oscclk", "dout_peri_bus" };
> +PNAME(mout_peri_uart_user_p) = { "oscclk", "dout_peri_uart" };
> +PNAME(mout_peri_hsi2c_user_p) = { "oscclk", "dout_peri_ip" };
> +PNAME(mout_peri_spi_user_p) = { "oscclk", "dout_peri_ip" };
> +
> +static const struct samsung_mux_clock peri_mux_clks[] __initconst = {
> + MUX(CLK_MOUT_PERI_BUS_USER, "mout_peri_bus_user", mout_peri_bus_user_p,
> + PLL_CON0_MUX_CLKCMU_PERI_BUS_USER, 4, 1),
> + MUX(CLK_MOUT_PERI_UART_USER, "mout_peri_uart_user",
> + mout_peri_uart_user_p, PLL_CON0_MUX_CLKCMU_PERI_UART_USER, 4, 1),
> + MUX(CLK_MOUT_PERI_HSI2C_USER, "mout_peri_hsi2c_user",
> + mout_peri_hsi2c_user_p, PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER, 4, 1),
> + MUX(CLK_MOUT_PERI_SPI_USER, "mout_peri_spi_user", mout_peri_spi_user_p,
> + PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 4, 1),
> +};
> +
> +static const struct samsung_div_clock peri_div_clks[] __initconst = {
> + DIV(CLK_DOUT_PERI_HSI2C0, "dout_peri_hsi2c0", "gout_peri_hsi2c0",
> + CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0, 0, 5),
> + DIV(CLK_DOUT_PERI_HSI2C1, "dout_peri_hsi2c1", "gout_peri_hsi2c1",
> + CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1, 0, 5),
> + DIV(CLK_DOUT_PERI_HSI2C2, "dout_peri_hsi2c2", "gout_peri_hsi2c2",
> + CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2, 0, 5),
> + DIV(CLK_DOUT_PERI_SPI0, "dout_peri_spi0", "mout_peri_spi_user",
> + CLK_CON_DIV_DIV_CLK_PERI_SPI_0, 0, 5),
> +};
> +
> +static const struct samsung_gate_clock peri_gate_clks[] __initconst = {
> + GATE(CLK_GOUT_PERI_HSI2C0, "gout_peri_hsi2c0", "mout_peri_hsi2c_user",
> + CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0, 21, 0, 0),
> + GATE(CLK_GOUT_PERI_HSI2C1, "gout_peri_hsi2c1", "mout_peri_hsi2c_user",
> + CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1, 21, 0, 0),
> + GATE(CLK_GOUT_PERI_HSI2C2, "gout_peri_hsi2c2", "mout_peri_hsi2c_user",
> + CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2, 21, 0, 0),
> + GATE(CLK_GOUT_HSI2C0_IPCLK, "gout_hsi2c0_ipclk", "dout_peri_hsi2c0",
> + CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK, 21, 0, 0),
> + GATE(CLK_GOUT_HSI2C0_PCLK, "gout_hsi2c0_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_HSI2C1_IPCLK, "gout_hsi2c1_ipclk", "dout_peri_hsi2c1",
> + CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK, 21, 0, 0),
> + GATE(CLK_GOUT_HSI2C1_PCLK, "gout_hsi2c1_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_HSI2C2_IPCLK, "gout_hsi2c2_ipclk", "dout_peri_hsi2c2",
> + CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK, 21, 0, 0),
> + GATE(CLK_GOUT_HSI2C2_PCLK, "gout_hsi2c2_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_I2C0_PCLK, "gout_i2c0_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_I2C1_PCLK, "gout_i2c1_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_I2C2_PCLK, "gout_i2c2_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_I2C3_PCLK, "gout_i2c3_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_I2C4_PCLK, "gout_i2c4_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_I2C5_PCLK, "gout_i2c5_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_I2C6_PCLK, "gout_i2c6_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_MCT_PCLK, "gout_mct_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_MCT_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_PWM_MOTOR_PCLK, "gout_pwm_motor_pclk",
> + "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_SPI0_IPCLK, "gout_spi0_ipclk", "dout_peri_spi0",
> + CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK, 21, 0, 0),
> + GATE(CLK_GOUT_SPI0_PCLK, "gout_spi0_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_SYSREG_PERI_PCLK, "gout_sysreg_peri_pclk",
> + "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_UART_IPCLK, "gout_uart_ipclk", "mout_peri_uart_user",
> + CLK_CON_GAT_GOUT_PERI_UART_IPCLK, 21, 0, 0),
> + GATE(CLK_GOUT_UART_PCLK, "gout_uart_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_UART_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_WDT0_PCLK, "gout_wdt0_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_WDT1_PCLK, "gout_wdt1_pclk", "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_GPIO_PERI_PCLK, "gout_gpio_peri_pclk",
> + "mout_peri_bus_user",
> + CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info peri_cmu_info __initconst = {
> + .mux_clks = peri_mux_clks,
> + .nr_mux_clks = ARRAY_SIZE(peri_mux_clks),
> + .div_clks = peri_div_clks,
> + .nr_div_clks = ARRAY_SIZE(peri_div_clks),
> + .gate_clks = peri_gate_clks,
> + .nr_gate_clks = ARRAY_SIZE(peri_gate_clks),
> + .nr_clk_ids = PERI_NR_CLK,
> + .clk_regs = peri_clk_regs,
> + .nr_clk_regs = ARRAY_SIZE(peri_clk_regs),
> + .clk_name = "dout_peri_bus",
> +};
> +
> +/* ---- CMU_CORE ------------------------------------------------------------ */
> +
> +/* Register Offset definitions for CMU_CORE (0x12000000) */
> +#define PLL_CON0_MUX_CLKCMU_CORE_BUS_USER 0x0600
> +#define PLL_CON0_MUX_CLKCMU_CORE_CCI_USER 0x0610
> +#define PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER 0x0620
> +#define PLL_CON0_MUX_CLKCMU_CORE_SSS_USER 0x0630
> +#define CLK_CON_MUX_MUX_CLK_CORE_GIC 0x1000
> +#define CLK_CON_DIV_DIV_CLK_CORE_BUSP 0x1800
> +#define CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK 0x2038
> +#define CLK_CON_GAT_GOUT_CORE_GIC_CLK 0x2040
> +#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK 0x20e8
> +#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN 0x20ec
> +#define CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK 0x2128
> +#define CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK 0x212c
> +
> +static const unsigned long core_clk_regs[] __initconst = {
> + PLL_CON0_MUX_CLKCMU_CORE_BUS_USER,
> + PLL_CON0_MUX_CLKCMU_CORE_CCI_USER,
> + PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER,
> + PLL_CON0_MUX_CLKCMU_CORE_SSS_USER,
> + CLK_CON_MUX_MUX_CLK_CORE_GIC,
> + CLK_CON_DIV_DIV_CLK_CORE_BUSP,
> + CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK,
> + CLK_CON_GAT_GOUT_CORE_GIC_CLK,
> + CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK,
> + CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN,
> + CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK,
> + CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_CORE */
> +PNAME(mout_core_bus_user_p) = { "oscclk", "dout_core_bus" };
> +PNAME(mout_core_cci_user_p) = { "oscclk", "dout_core_cci" };
> +PNAME(mout_core_mmc_embd_user_p) = { "oscclk", "dout_core_mmc_embd" };
> +PNAME(mout_core_sss_user_p) = { "oscclk", "dout_core_sss" };
> +PNAME(mout_core_gic_p) = { "dout_core_busp", "oscclk" };
> +
> +static const struct samsung_mux_clock core_mux_clks[] __initconst = {
> + MUX(CLK_MOUT_CORE_BUS_USER, "mout_core_bus_user", mout_core_bus_user_p,
> + PLL_CON0_MUX_CLKCMU_CORE_BUS_USER, 4, 1),
> + MUX(CLK_MOUT_CORE_CCI_USER, "mout_core_cci_user", mout_core_cci_user_p,
> + PLL_CON0_MUX_CLKCMU_CORE_CCI_USER, 4, 1),
> + MUX_F(CLK_MOUT_CORE_MMC_EMBD_USER, "mout_core_mmc_embd_user",
> + mout_core_mmc_embd_user_p, PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER,
> + 4, 1, CLK_SET_RATE_PARENT, 0),
> + MUX(CLK_MOUT_CORE_SSS_USER, "mout_core_sss_user", mout_core_sss_user_p,
> + PLL_CON0_MUX_CLKCMU_CORE_SSS_USER, 4, 1),
> + MUX(CLK_MOUT_CORE_GIC, "mout_core_gic", mout_core_gic_p,
> + CLK_CON_MUX_MUX_CLK_CORE_GIC, 0, 1),
> +};
> +
> +static const struct samsung_div_clock core_div_clks[] __initconst = {
> + DIV(CLK_DOUT_CORE_BUSP, "dout_core_busp", "mout_core_bus_user",
> + CLK_CON_DIV_DIV_CLK_CORE_BUSP, 0, 2),
> +};
> +
> +static const struct samsung_gate_clock core_gate_clks[] __initconst = {
> + GATE(CLK_GOUT_CCI_ACLK, "gout_cci_aclk", "mout_core_cci_user",
> + CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK, 21, 0, 0),
> + GATE(CLK_GOUT_GIC_CLK, "gout_gic_clk", "mout_core_gic",
> + CLK_CON_GAT_GOUT_CORE_GIC_CLK, 21, 0, 0),
> + GATE(CLK_GOUT_MMC_EMBD_ACLK, "gout_mmc_embd_aclk", "dout_core_busp",
> + CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK, 21, 0, 0),
> + GATE(CLK_GOUT_MMC_EMBD_SDCLKIN, "gout_mmc_embd_sdclkin",
> + "mout_core_mmc_embd_user", CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN,
> + 21, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_GOUT_SSS_ACLK, "gout_sss_aclk", "mout_core_sss_user",
> + CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK, 21, 0, 0),
> + GATE(CLK_GOUT_SSS_PCLK, "gout_sss_pclk", "dout_core_busp",
> + CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info core_cmu_info __initconst = {
> + .mux_clks = core_mux_clks,
> + .nr_mux_clks = ARRAY_SIZE(core_mux_clks),
> + .div_clks = core_div_clks,
> + .nr_div_clks = ARRAY_SIZE(core_div_clks),
> + .gate_clks = core_gate_clks,
> + .nr_gate_clks = ARRAY_SIZE(core_gate_clks),
> + .nr_clk_ids = CORE_NR_CLK,
> + .clk_regs = core_clk_regs,
> + .nr_clk_regs = ARRAY_SIZE(core_clk_regs),
> + .clk_name = "dout_core_bus",
> +};
> +
> +/* ---- CMU_DPU ------------------------------------------------------------- */
> +
> +/* Register Offset definitions for CMU_DPU (0x13000000) */
> +#define PLL_CON0_MUX_CLKCMU_DPU_USER 0x0600
> +#define CLK_CON_DIV_DIV_CLK_DPU_BUSP 0x1800
> +#define CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK 0x2004
> +#define CLK_CON_GAT_GOUT_DPU_ACLK_DECON0 0x2010
> +#define CLK_CON_GAT_GOUT_DPU_ACLK_DMA 0x2014
> +#define CLK_CON_GAT_GOUT_DPU_ACLK_DPP 0x2018
> +#define CLK_CON_GAT_GOUT_DPU_PPMU_ACLK 0x2028
> +#define CLK_CON_GAT_GOUT_DPU_PPMU_PCLK 0x202c
> +#define CLK_CON_GAT_GOUT_DPU_SMMU_CLK 0x2038
> +#define CLK_CON_GAT_GOUT_DPU_SYSREG_PCLK 0x203c
> +
> +static const unsigned long dpu_clk_regs[] __initconst = {
> + PLL_CON0_MUX_CLKCMU_DPU_USER,
> + CLK_CON_DIV_DIV_CLK_DPU_BUSP,
> + CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK,
> + CLK_CON_GAT_GOUT_DPU_ACLK_DECON0,
> + CLK_CON_GAT_GOUT_DPU_ACLK_DMA,
> + CLK_CON_GAT_GOUT_DPU_ACLK_DPP,
> + CLK_CON_GAT_GOUT_DPU_PPMU_ACLK,
> + CLK_CON_GAT_GOUT_DPU_PPMU_PCLK,
> + CLK_CON_GAT_GOUT_DPU_SMMU_CLK,
> + CLK_CON_GAT_GOUT_DPU_SYSREG_PCLK,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_CORE */
> +PNAME(mout_dpu_user_p) = { "oscclk", "dout_dpu" };
> +
> +static const struct samsung_mux_clock dpu_mux_clks[] __initconst = {
> + MUX(CLK_MOUT_DPU_USER, "mout_dpu_user", mout_dpu_user_p,
> + PLL_CON0_MUX_CLKCMU_DPU_USER, 4, 1),
> +};
> +
> +static const struct samsung_div_clock dpu_div_clks[] __initconst = {
> + DIV(CLK_DOUT_DPU_BUSP, "dout_dpu_busp", "mout_dpu_user",
> + CLK_CON_DIV_DIV_CLK_DPU_BUSP, 0, 3),
> +};
> +
> +static const struct samsung_gate_clock dpu_gate_clks[] __initconst = {
> + GATE(CLK_GOUT_DPU_CMU_DPU_PCLK, "gout_dpu_cmu_dpu_pclk",
> + "dout_dpu_busp", CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_DPU_DECON0_ACLK, "gout_dpu_decon0_aclk", "mout_dpu_user",
> + CLK_CON_GAT_GOUT_DPU_ACLK_DECON0, 21, 0, 0),
> + GATE(CLK_GOUT_DPU_DMA_ACLK, "gout_dpu_dma_aclk", "mout_dpu_user",
> + CLK_CON_GAT_GOUT_DPU_ACLK_DMA, 21, 0, 0),
> + GATE(CLK_GOUT_DPU_DPP_ACLK, "gout_dpu_dpp_aclk", "mout_dpu_user",
> + CLK_CON_GAT_GOUT_DPU_ACLK_DPP, 21, 0, 0),
> + GATE(CLK_GOUT_DPU_PPMU_ACLK, "gout_dpu_ppmu_aclk", "mout_dpu_user",
> + CLK_CON_GAT_GOUT_DPU_PPMU_ACLK, 21, 0, 0),
> + GATE(CLK_GOUT_DPU_PPMU_PCLK, "gout_dpu_ppmu_pclk", "dout_dpu_busp",
> + CLK_CON_GAT_GOUT_DPU_PPMU_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_DPU_SMMU_CLK, "gout_dpu_smmu_clk", "mout_dpu_user",
> + CLK_CON_GAT_GOUT_DPU_SMMU_CLK, 21, 0, 0),
> + GATE(CLK_GOUT_DPU_SYSREG_PCLK, "gout_dpu_sysreg_pclk", "dout_dpu_busp",
> + CLK_CON_GAT_GOUT_DPU_SYSREG_PCLK, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info dpu_cmu_info __initconst = {
> + .mux_clks = dpu_mux_clks,
> + .nr_mux_clks = ARRAY_SIZE(dpu_mux_clks),
> + .div_clks = dpu_div_clks,
> + .nr_div_clks = ARRAY_SIZE(dpu_div_clks),
> + .gate_clks = dpu_gate_clks,
> + .nr_gate_clks = ARRAY_SIZE(dpu_gate_clks),
> + .nr_clk_ids = DPU_NR_CLK,
> + .clk_regs = dpu_clk_regs,
> + .nr_clk_regs = ARRAY_SIZE(dpu_clk_regs),
> + .clk_name = "dout_dpu",
> +};
> +
> +/* ---- platform_driver ----------------------------------------------------- */
> +
> +static int __init exynos850_cmu_probe(struct platform_device *pdev)
> +{
> + const struct samsung_cmu_info *info;
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> +
> + info = of_device_get_match_data(dev);
> + exynos850_init_clocks(np, info->clk_regs, info->nr_clk_regs);
> + samsung_cmu_register_one(np, info);
> +
> + /* Keep bus clock running, so it's possible to access CMU registers */
> + if (info->clk_name) {
> + struct clk *bus_clk;
> +
> + bus_clk = clk_get(dev, info->clk_name);
> + if (IS_ERR(bus_clk)) {
> + pr_err("%s: could not find bus clock %s; err = %ld\n",
> + __func__, info->clk_name, PTR_ERR(bus_clk));
> + } else {
> + clk_prepare_enable(bus_clk);
> + }
> + }
> +
> + return 0;
> +}
> +
> +/* CMUs which belong to Power Domains and need runtime PM to be implemented */
> +static const struct of_device_id exynos850_cmu_of_match[] = {
> + {
> + .compatible = "samsung,exynos850-cmu-hsi",
> + .data = &hsi_cmu_info,
> + }, {
> + .compatible = "samsung,exynos850-cmu-peri",
> + .data = &peri_cmu_info,
> + }, {
> + .compatible = "samsung,exynos850-cmu-core",
> + .data = &core_cmu_info,
> + }, {
> + .compatible = "samsung,exynos850-cmu-dpu",
> + .data = &dpu_cmu_info,
> + }, {
> + },
> +};
> +
> +static struct platform_driver exynos850_cmu_driver __refdata = {
> + .driver = {
> + .name = "exynos850-cmu",
> + .of_match_table = exynos850_cmu_of_match,
> + .suppress_bind_attrs = true,
> + },
> + .probe = exynos850_cmu_probe,
> +};
> +
> +static int __init exynos850_cmu_init(void)
> +{
> + return platform_driver_register(&exynos850_cmu_driver);
> +}
> +core_initcall(exynos850_cmu_init);
>
Looks good to me.
Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
Powered by blists - more mailing lists