linux-kernel - Re: [RFC PATCH 1/4] dt-bindings: pincfg-node: Add "output-impedance" property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CA+V-a8s4ti-WNxiEPB8WCVNdwEv-Y6rZgMKuc=TmsxAGiaet1g@mail.gmail.com>
Date:   Tue, 26 Oct 2021 20:25:06 +0100
From:   "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To:     Rob Herring <robh@...nel.org>
Cc:     Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [RFC PATCH 1/4] dt-bindings: pincfg-node: Add "output-impedance" property

Hi Rob,

Thank you for the review.

On Wed, Oct 6, 2021 at 10:14 PM Rob Herring <robh@...nel.org> wrote:
>
> On Thu, Sep 30, 2021 at 01:16:27PM +0100, Lad Prabhakar wrote:
> > On RZ/G2L SoC for Group-B pins, output impedance can be configured.
> > This patch documents "output-impedance" property in pincfg-node.yaml so
> > that other platforms requiring such feature can make use of this property.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> >  Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> > index 71ed0a9def84..cdcb23daeca2 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> > +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
> > @@ -114,6 +114,10 @@ properties:
> >      description: enable output on a pin without actively driving it
> >        (such as enabling an output buffer)
> >
> > +  output-impedance:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
>
> Use standard unit suffix and drop the type.
>
Sure will do in the next version.

Cheers,
Prabhakar

> > +    description: set the pins output impedance at most X ohm
> > +
> >    output-low:
> >      type: boolean
> >      description: set the pin to output mode with low level
> > --
> > 2.17.1
> >
> >