| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <31576d89-583a-dd56-056f-58784184c8b7@linux.ibm.com>
Date: Tue, 26 Oct 2021 15:28:55 +0530
From: kajoljain <kjain@...ux.ibm.com>
To: "Paul A. Clarke" <pc@...ibm.com>
Cc: maddy@...ux.vnet.ibm.com, rnsastry@...ux.ibm.com,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
acme@...nel.org, linux-perf-users@...r.kernel.org,
atrajeev@...ux.vnet.ibm.com, jolsa@...hat.com
Subject: Re: [PATCH v2] perf vendor events power10: Add metric events json
file for power10 platform
On 10/22/21 8:19 PM, Paul A. Clarke wrote:
> Thanks for the changes!
> More nits below (many left over from prior review)...
>
> On Fri, Oct 22, 2021 at 11:55:05AM +0530, Kajol Jain wrote:
>> Add pmu metric json file for power10 platform.
>>
>> Signed-off-by: Kajol Jain <kjain@...ux.ibm.com>
>> ---
>> Changelog v1 -> v2:
>> - Did some nit changes in BriefDescription field
>> as suggested by Paul A. Clarke
>>
>> - Link to the v1 patch: https://lkml.org/lkml/2021/10/6/131
>>
>> .../arch/powerpc/power10/metrics.json | 676 ++++++++++++++++++
>> 1 file changed, 676 insertions(+)
>> create mode 100644 tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>>
>> diff --git a/tools/perf/pmu-events/arch/powerpc/power10/metrics.json b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>> new file mode 100644
>> index 000000000000..8adab5cd9934
>> --- /dev/null
>> +++ b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>> @@ -0,0 +1,676 @@
>> +[
>> + {
>> + "BriefDescription": "Percentage of cycles that are run cycles",
>> + "MetricExpr": "PM_RUN_CYC / PM_CYC * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "RUN_CYCLES_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per completed instruction",
>> + "MetricExpr": "PM_CYC / PM_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "CYCLES_PER_INSTRUCTION"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled for any reason",
>> + "MetricExpr": "PM_DISP_STALL_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled because there was a flush",
>> + "MetricExpr": "PM_DISP_STALL_FLUSH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_FLUSH_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled because the MMU was handling a translation miss",
>> + "MetricExpr": "PM_DISP_STALL_TRANSLATION / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_TRANSLATION_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled waiting to resolve an instruction ERAT miss",
>> + "MetricExpr": "PM_DISP_STALL_IERAT_ONLY_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IERAT_ONLY_MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled waiting to resolve an instruction TLB miss",
>> + "MetricExpr": "PM_DISP_STALL_ITLB_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_ITLB_MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled due to an icache miss",
>> + "MetricExpr": "PM_DISP_STALL_IC_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while the instruction was fetched from the local L2",
>> + "MetricExpr": "PM_DISP_STALL_IC_L2 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_L2_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while the instruction was fetched from the local L3",
>> + "MetricExpr": "PM_DISP_STALL_IC_L3 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_L3_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while the instruction was fetched from any source beyond the local L3",
>> + "MetricExpr": "PM_DISP_STALL_IC_L3MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_L3MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled due to an icache miss after a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_ICMISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_ICMISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while instruction was fetched from the local L2 after suffering a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L2 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L2_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while instruction was fetched from the local L3 after suffering a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L3_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled while instruction was fetched from any source beyond the local L3 after suffering a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L3MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled due to a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch for any reason",
>> + "MetricExpr": "PM_DISP_STALL_HELD_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because of a synchronizing instruction that requires the ICT to be empty before dispatch",
>> + "MetricExpr": "PM_DISP_STALL_HELD_SYNC_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISP_HELD_STALL_SYNC_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch while waiting on the scoreboard",
>> + "MetricExpr": "PM_DISP_STALL_HELD_SCOREBOARD_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISP_HELD_STALL_SCOREBOARD_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch due to issue queue full",
>> + "MetricExpr": "PM_DISP_STALL_HELD_ISSQ_FULL_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISP_HELD_STALL_ISSQ_FULL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because the mapper/SRB was full",
>> + "MetricExpr": "PM_DISP_STALL_HELD_RENAME_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_RENAME_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because the STF mapper/SRB was full",
>> + "MetricExpr": "PM_DISP_STALL_HELD_STF_MAPPER_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_STF_MAPPER_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because the XVFC mapper/SRB was full",
>> + "MetricExpr": "PM_DISP_STALL_HELD_XVFC_MAPPER_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_XVFC_MAPPER_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch for any other reason",
>> + "MetricExpr": "PM_DISP_STALL_HELD_OTHER_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_OTHER_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction has been dispatched but not issued for any reason",
>> + "MetricExpr": "PM_ISSUE_STALL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "ISSUE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting to be finished in one of the execution units",
>> + "MetricExpr": "PM_EXEC_STALL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "EXECUTION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction spent executing an NTC instruction that gets flushed some time after dispatch",
>> + "MetricExpr": "PM_EXEC_STALL_NTC_FLUSH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "NTC_FLUSH_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTF instruction finishes at dispatch",
>> + "MetricExpr": "PM_EXEC_STALL_FIN_AT_DISP / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "FIN_AT_DISP_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing in the branch unit",
>> + "MetricExpr": "PM_EXEC_STALL_BRU / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "BRU_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a simple fixed point instruction that is executing in the LSU",
>> + "MetricExpr": "PM_EXEC_STALL_SIMPLE_FX / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "SIMPLE_FX_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing in the VSU",
>> + "MetricExpr": "PM_EXEC_STALL_VSU / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "VSU_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting to be finished in one of the execution units",
>> + "MetricExpr": "PM_EXEC_STALL_TRANSLATION / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "TRANSLATION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a load or store that suffered a translation miss",
>> + "MetricExpr": "PM_EXEC_STALL_DERAT_ONLY_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DERAT_ONLY_MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is recovering from a TLB miss",
>> + "MetricExpr": "PM_EXEC_STALL_DERAT_DTLB_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DERAT_DTLB_MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing in the LSU",
>> + "MetricExpr": "PM_EXEC_STALL_LSU / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LSU_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a load that is executing in the LSU",
>> + "MetricExpr": "PM_EXEC_STALL_LOAD / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LOAD_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L2L3_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, with an RC dispatch conflict",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_CONFLICT / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L2L3_CONFLICT_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, without an RC dispatch conflict",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_NOCONFLICT / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L2L3_NOCONFLICT_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a source beyond the local L2 and local L3",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L3MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L3MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a neighbor chiplet's L2 or L3 in the same chip",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L21_L31 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L21_L31_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from L4, local memory or OpenCapp chip",
>
> What is "OpenCapp"? Is is different from OpenCAPI?
Hi Paul,
Yes, OpenCapp is same as OpenCAPI. But as these descriptions
are provided by hardware team and same is followed in the PMU workbook.
We need to use OpenCapp.
>
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_LMEM / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_LMEM_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a remote chip (cache, L4, memory or OpenCapp) in the same group",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_CHIP / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_OFF_CHIP_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is waiting for a load miss to resolve from a distant chip (cache, L4, memory or OpenCapp chip)",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_NODE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_OFF_NODE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing a TLBIEL instruction",
>> + "MetricExpr": "PM_EXEC_STALL_TLBIEL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "TLBIEL_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is finishing a load after its data has been reloaded from a data source beyond the local L1, OR when the LSU is processing an L1-hit, OR when the NTF instruction merged with another load in the LMQ",
>> + "MetricExpr": "PM_EXEC_STALL_LOAD_FINISH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LOAD_FINISH_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a store that is executing in the LSU",
>> + "MetricExpr": "PM_EXEC_STALL_STORE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STORE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is in the store unit outside of handling store misses or other special store operations",
>
> Is "store unit" not the same as "LSU" ? Use "LSU" uniformly if appropriate:
> s/store unit/LSU/
Here using store unit is more appropriate as we are counting
instructions executed in the store unit of LSU.
>
>> + "MetricExpr": "PM_EXEC_STALL_STORE_PIPE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STORE_PIPE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a store whose cache line was not resident in the L1 and had to wait for allocation of the missing line into the L1",
>> + "MetricExpr": "PM_EXEC_STALL_STORE_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STORE_MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a TLBIE instruction waiting for a response from the L2",
>> + "MetricExpr": "PM_EXEC_STALL_TLBIE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "TLBIE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is executing a PTESYNC instruction",
>> + "MetricExpr": "PM_EXEC_STALL_PTESYNC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "PTESYNC_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction cannot complete because the thread was blocked",
>> + "MetricExpr": "PM_CMPL_STALL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction cannot complete because it was interrupted by ANY exception",
>> + "MetricExpr": "PM_CMPL_STALL_EXCEPTION / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "EXCEPTION_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is stuck at finish waiting for the non-speculative finish of either a STCX instruction waiting for its result or a load waiting for non-critical sectors of data and ECC",
>> + "MetricExpr": "PM_CMPL_STALL_MEM_ECC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "MEM_ECC_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction cannot complete the instruction is a STCX instruction waiting for resolution from the nest",
>
> Need to reword this, I think. I propose "Average cycles per instruction
> when the NTC instruction is a STCX instruction waiting for resolution
> from the nest", which follows the form used by HWSYNC_COMPLETION_STALL_CPI,
> below.
Yes make sense. Will update this description.
>
>> + "MetricExpr": "PM_CMPL_STALL_STCX / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STCX_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a LWSYNC instruction waiting to complete",
>> + "MetricExpr": "PM_CMPL_STALL_LWSYNC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LWSYNC_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction is a HWSYNC instruction stuck at finish waiting for a response from the L2",
>> + "MetricExpr": "PM_CMPL_STALL_HWSYNC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "HWSYNC_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction required special handling before completion",
>> + "MetricExpr": "PM_CMPL_STALL_SPECIAL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "SPECIAL_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch was stalled because fetch was being held, so there was nothing in the pipeline for this thread",
>> + "MetricExpr": "PM_DISP_STALL_FETCH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_FETCH_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTC instruction was held at dispatch because of power management",
>> + "MetricExpr": "PM_DISP_STALL_HELD_HALT_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_HALT_CPI"
>> + },
>> + {
>> + "BriefDescription": "Percentage of flushes per completed run instruction",
>
> s/per completed run instruction/per instruction/
As discussed I will update it to completed insruction in all the below
descriptions.
>
>> + "MetricExpr": "PM_FLUSH / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "FLUSH_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of flushes due to a branch mispredict per instruction",
>> + "MetricExpr": "PM_FLUSH_MPRED / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "BR_MPRED_FLUSH_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of branch mispredictions per completed run instruction",
>
> s/per completed run instruction/per instruction/
>
>> + "MetricExpr": "PM_BR_MPRED_CMPL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "Others",
>> + "MetricName": "BRANCH_MISPREDICTION_RATE"
>> + },
>> + {
>> + "BriefDescription": "Percentage of finished loads that missed in the L1",
>> + "MetricExpr": "PM_LD_MISS_L1 / PM_LD_REF_L1 * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "L1_LD_MISS_RATIO",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed run instructions that were loads that missed the L1",
>
> s/completed run instructions/instructions/
>
>> + "MetricExpr": "PM_LD_MISS_L1 / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "L1_LD_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of instructions when the DPTEG required for the load/store instruction in execution was missing from the TLB",
>> + "MetricExpr": "PM_DTLB_MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "DTLB_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of instructions dispatched per instruction completed",
>> + "MetricExpr": "PM_INST_DISP / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "DISPATCH_PER_INST_CMPL"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed run instructions that were a demand load that did not hit in the L1 or L2",
>
> s/completed run instructions/instructions/
>
>> + "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "L2_LD_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed run instructions that were demand fetches that missed the L1 instruction cache",
>
> s/completed run instructions/instructions/
> s/instruction cache/icache/ to be consistent with the rest of the file
>
>> + "MetricExpr": "PM_L1_ICACHE_MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Instruction_Misses",
>> + "MetricName": "L1_INST_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed run instructions that were demand fetches that reloaded from beyond the L3 instruction cache",
>
> s/completed run instructions/instructions/
> s/instruction cache/icache/ to be consistent with the rest of the file
Sure, I will make it icache.
Thanks,
Kajol Jain
>
>> + "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "L3_INST_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of completed instructions per cycle",
>> + "MetricExpr": "PM_INST_CMPL / PM_CYC",
>> + "MetricGroup": "General",
>> + "MetricName": "IPC"
>> + },
>> + {
>> + "BriefDescription": "Average number of cycles per completed instruction group",
>> + "MetricExpr": "PM_CYC / PM_1PLUS_PPC_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "CYCLES_PER_COMPLETED_INSTRUCTIONS_SET"
>> + },
>> + {
>> + "BriefDescription": "Percentage of cycles when at least 1 instruction dispatched",
>> + "MetricExpr": "PM_1PLUS_PPC_DISP / PM_RUN_CYC * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "CYCLES_ATLEAST_ONE_INST_DISPATCHED",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of finished loads per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_LD_REF_L1 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "LOADS_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of finished stores per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_ST_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "STORES_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand loads that reloaded from beyond the L2 per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L2_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand loads that reloaded from beyond the L3 per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L3_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 4k page size per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_DERAT_MISS_4K / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_4K_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 64k page size per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_DERAT_MISS_64K / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_64K_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of run cycles per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_RUN_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "RUN_CPI"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_DERAT_MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of completed run instructions per run cycle",
>
> s/completed run instructions/instructions/
>
>> + "MetricExpr": "PM_RUN_INST_CMPL / PM_RUN_CYC",
>> + "MetricGroup": "General",
>> + "MetricName": "RUN_IPC"
>> + },
>> + {
>> + "BriefDescription": "Average number of instructions completed per instruction group",
>
> s/completed//
>
>> + "MetricExpr": "PM_RUN_INST_CMPL / PM_1PLUS_PPC_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "AVERAGE_COMPLETED_INSTRUCTION_SET_SIZE"
>> + },
>> + {
>> + "BriefDescription": "Average number of finished instructions per completed run instructions",
>
> s/completed run instructions/instruction/
>
>> + "MetricExpr": "PM_INST_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "INST_FIN_PER_CMPL"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the NTF instruction is completing and the finish was overlooked",
>> + "MetricExpr": "PM_EXEC_STALL_UNKNOWN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "EXEC_STALL_UNKOWN_CPI"
>> + },
>> + {
>> + "BriefDescription": "Percentage of finished branches that were taken",
>> + "MetricExpr": "PM_BR_TAKEN_CMPL / PM_BR_FIN * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "TAKEN_BRANCHES",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed run instructions that were a demand load that did not hit in the L1, L2, or the L3",
>
> s/completed run instructions/instructions/
>
>> + "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "L3_LD_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of finished branches per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_BR_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "BRANCHES_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of instructions finished in the LSU per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_LSU_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "LSU_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of instructions finished in the VSU per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_VSU_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "VSU_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of TLBIE instructions finished in the LSU per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_TLBIE_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "TLBIE_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of STCX instructions finshed per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_STCX_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "STXC_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of LARX instructions finshed per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_LARX_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "LARX_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of PTESYNC instructions finshed per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_PTESYNC_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "PTESYNC_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Average number of simple fixed-point instructions finshed in the store unit per completed run instruction",
>
> s/completed run instruction/instruction/
> s/store unit/LSU/
>
>> + "MetricExpr": "PM_FX_LSU_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "FX_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand load misses that reloaded the L1 cache",
>> + "MetricExpr": "PM_LD_DEMAND_MISS_L1 / PM_LD_MISS_L1 * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "DL1_MISS_RELOADS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand load misses that reloaded from beyond the local L2",
>> + "MetricExpr": "PM_DATA_FROM_L2MISS / PM_LD_DEMAND_MISS_L1 * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L2_MISS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand load misses that reloaded from beyond the local L3",
>> + "MetricExpr": "PM_DATA_FROM_L3MISS / PM_LD_DEMAND_MISS_L1 * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L3_MISS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of cycles stalled due to the NTC instruction waiting for a load miss to resolve from a source beyond the local L2 and local L3",
>> + "MetricExpr": "DMISS_L3MISS_STALL_CPI / RUN_CPI * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "DCACHE_MISS_CPI",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 2M page size per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_DERAT_MISS_2M / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_2M_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 16M page size per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_DERAT_MISS_16M / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_16M_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 4K page size",
>> + "MetricExpr": "PM_DERAT_MISS_4K / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_4K_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 2M page size",
>> + "MetricExpr": "PM_DERAT_MISS_2M / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_2M_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 16M page size",
>> + "MetricExpr": "PM_DERAT_MISS_16M / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_16M_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 64K page size",
>> + "MetricExpr": "PM_DERAT_MISS_64K / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_64K_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses that resulted in TLB reloads",
>> + "MetricExpr": "PM_DTLB_MISS / PM_DERAT_MISS * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_MISS_RELOAD",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of icache misses that were reloaded from beyond the local L3",
>> + "MetricExpr": "PM_INST_FROM_L3MISS / PM_L1_ICACHE_MISS * 100",
>> + "MetricGroup": "Instruction_Misses",
>> + "MetricName": "INST_FROM_L3_MISS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of icache reloads from the beyond the L3 per completed run instruction",
>
> s/completed run instruction/instruction/
>
>> + "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Instruction_Misses",
>> + "MetricName": "INST_FROM_L3_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + }
>> +]
>> --
>
> PC
>
Powered by blists - more mailing lists