[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <PH0PR03MB6366162032358FC1A2DB886F99859@PH0PR03MB6366.namprd03.prod.outlook.com>
Date: Wed, 27 Oct 2021 07:31:12 +0000
From: "Sa, Nuno" <Nuno.Sa@...log.com>
To: "Miclaus, Antoniu" <Antoniu.Miclaus@...log.com>,
"jic23@...nel.org" <jic23@...nel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "Miclaus, Antoniu" <Antoniu.Miclaus@...log.com>
Subject: RE: [PATCH 1/2] iio: frequency: admv1013: add support for ADMV1013
> -----Original Message-----
> From: Antoniu Miclaus <antoniu.miclaus@...log.com>
> Sent: Tuesday, October 26, 2021 5:28 PM
> To: jic23@...nel.org; robh+dt@...nel.org; linux-iio@...r.kernel.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org
> Cc: Miclaus, Antoniu <Antoniu.Miclaus@...log.com>
> Subject: [PATCH 1/2] iio: frequency: admv1013: add support for
> ADMV1013
>
> [External]
>
> The ADMV1013 is a wideband, microwave upconverter optimized
> for point to point microwave radio designs operating in the
> 24 GHz to 44 GHz radio frequency (RF) range.
>
> Datasheet:
> https://www.analog.com/media/en/technical-documentation/data-
> sheets/ADMV1013.pdf
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
> ---
> drivers/iio/frequency/Kconfig | 13 +
> drivers/iio/frequency/Makefile | 1 +
> drivers/iio/frequency/admv1013.c | 579
> +++++++++++++++++++++++++++++++
> 3 files changed, 593 insertions(+)
> create mode 100644 drivers/iio/frequency/admv1013.c
>
> diff --git a/drivers/iio/frequency/Kconfig
> b/drivers/iio/frequency/Kconfig
> index 240b81502512..11792a5e7b83 100644
> --- a/drivers/iio/frequency/Kconfig
> +++ b/drivers/iio/frequency/Kconfig
> @@ -49,5 +49,18 @@ config ADF4371
>
> To compile this driver as a module, choose M here: the
> module will be called adf4371.
> +
> +config ADMV1013
> + tristate "Analog Devices ADMV1013 Microwave Upconverter"
> + depends on SPI
> + depends on COMMON_CLK
> + depends on 64BIT
This can be 'depends on SPI && COMMON_CLK && 64BIT'
> + help
> + Say yes here to build support for Analog Devices ADMV1013
> + 24 GHz to 44 GHz, Wideband, Microwave Upconverter.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called admv1013.
> +
> endmenu
> endmenu
> diff --git a/drivers/iio/frequency/Makefile
> b/drivers/iio/frequency/Makefile
> index 518b1e50caef..559922a8196e 100644
> --- a/drivers/iio/frequency/Makefile
> +++ b/drivers/iio/frequency/Makefile
> @@ -7,3 +7,4 @@
> obj-$(CONFIG_AD9523) += ad9523.o
> obj-$(CONFIG_ADF4350) += adf4350.o
> obj-$(CONFIG_ADF4371) += adf4371.o
> +obj-$(CONFIG_ADMV1013) += admv1013.o
> diff --git a/drivers/iio/frequency/admv1013.c
> b/drivers/iio/frequency/admv1013.c
> new file mode 100644
> index 000000000000..1d46f96afc23
> --- /dev/null
> +++ b/drivers/iio/frequency/admv1013.c
> @@ -0,0 +1,579 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADMV1013 driver
> + *
> + * Copyright 2021 Analog Devices Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/device.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#include <asm/unaligned.h>
> +
> +/* ADMV1013 Register Map */
> +#define ADMV1013_REG_SPI_CONTROL 0x00
> +#define ADMV1013_REG_ALARM 0x01
> +#define ADMV1013_REG_ALARM_MASKS 0x02
> +#define ADMV1013_REG_ENABLE 0x03
> +#define ADMV1013_REG_LO_AMP_I 0x05
> +#define ADMV1013_REG_LO_AMP_Q 0x06
> +#define ADMV1013_REG_OFFSET_ADJUST_I 0x07
> +#define ADMV1013_REG_OFFSET_ADJUST_Q 0x08
> +#define ADMV1013_REG_QUAD 0x09
> +#define ADMV1013_REG_VVA_TEMP_COMP 0x0A
> +
> +/* ADMV1013_REG_SPI_CONTROL Map */
> +#define ADMV1013_PARITY_EN_MSK BIT(15)
> +#define ADMV1013_SPI_SOFT_RESET_MSK BIT(14)
> +#define ADMV1013_CHIP_ID_MSK GENMASK(11, 4)
> +#define ADMV1013_CHIP_ID 0xA
> +#define ADMV1013_REVISION_ID_MSK GENMASK(3, 0)
> +
> +/* ADMV1013_REG_ALARM Map */
> +#define ADMV1013_PARITY_ERROR_MSK BIT(15)
> +#define ADMV1013_TOO_FEW_ERRORS_MSK BIT(14)
> +#define ADMV1013_TOO_MANY_ERRORS_MSK BIT(13)
> +#define ADMV1013_ADDRESS_RANGE_ERROR_MSK BIT(12)
> +
> +/* ADMV1013_REG_ENABLE Map */
> +#define ADMV1013_VGA_PD_MSK BIT(15)
> +#define ADMV1013_MIXER_PD_MSK BIT(14)
> +#define ADMV1013_QUAD_PD_MSK
> GENMASK(13, 11)
> +#define ADMV1013_BG_PD_MSK BIT(10)
> +#define ADMV1013_MIXER_IF_EN_MSK BIT(7)
> +#define ADMV1013_DET_EN_MSK BIT(5)
> +
> +/* ADMV1013_REG_LO_AMP_I Map */
> +#define ADMV1013_LOAMP_PH_ADJ_I_FINE_MSK GENMASK(13, 7)
> +#define ADMV1013_MIXER_VGATE_MSK GENMASK(6, 0)
> +
> +/* ADMV1013_REG_LO_AMP_Q Map */
> +#define ADMV1013_LOAMP_PH_ADJ_Q_FINE_MSK GENMASK(13, 7)
> +
> +/* ADMV1013_REG_OFFSET_ADJUST_I Map */
> +#define ADMV1013_MIXER_OFF_ADJ_I_P_MSK
> GENMASK(15, 9)
> +#define ADMV1013_MIXER_OFF_ADJ_I_N_MSK
> GENMASK(8, 2)
> +
> +/* ADMV1013_REG_OFFSET_ADJUST_Q Map */
> +#define ADMV1013_MIXER_OFF_ADJ_Q_P_MSK
> GENMASK(15, 9)
> +#define ADMV1013_MIXER_OFF_ADJ_Q_N_MSK
> GENMASK(8, 2)
> +
> +/* ADMV1013_REG_QUAD Map */
> +#define ADMV1013_QUAD_SE_MODE_MSK GENMASK(9, 6)
> +#define ADMV1013_QUAD_FILTERS_MSK GENMASK(3, 0)
> +
> +/* ADMV1013_REG_VVA_TEMP_COMP Map */
> +#define ADMV1013_VVA_TEMP_COMP_MSK
> GENMASK(15, 0)
> +
> +struct admv1013_state {
> + struct spi_device *spi;
> + struct clk *clkin;
> + /* Protect against concurrent accesses to the device */
> + struct mutex lock;
> + struct regulator *reg;
> + struct notifier_block nb;
> + unsigned int quad_se_mode;
> + bool vga_pd;
> + bool mixer_pd;
> + bool quad_pd;
> + bool bg_pd;
> + bool mixer_if_en;
> + bool det_en;
> + u8 data[3] ____cacheline_aligned;
> +};
> +
> +static int __admv1013_spi_read(struct admv1013_state *st, unsigned
> int reg,
> + unsigned int *val)
> +{
> + int ret;
> + struct spi_transfer t = {0};
> +
> + st->data[0] = 0x80 | (reg << 1);
> + st->data[1] = 0x0;
> + st->data[2] = 0x0;
> +
> + t.rx_buf = &st->data[0];
> + t.tx_buf = &st->data[0];
> + t.len = 3;
> +
> + ret = spi_sync_transfer(st->spi, &t, 1);
> + if (ret)
> + return ret;
> +
> + *val = (get_unaligned_be24(&st->data[0]) >> 1) &
> GENMASK(15, 0);
> +
> + return ret;
> +}
> +
> +static int admv1013_spi_read(struct admv1013_state *st, unsigned
> int reg,
> + unsigned int *val)
> +{
> + int ret;
> +
> + mutex_lock(&st->lock);
> + ret = __admv1013_spi_read(st, reg, val);
> + mutex_unlock(&st->lock);
> +
> + return ret;
> +}
> +
> +static int __admv1013_spi_write(struct admv1013_state *st,
> + unsigned int reg,
> + unsigned int val)
> +{
> + put_unaligned_be24((val << 1) | (reg << 17), &st->data[0]);
> +
> + return spi_write(st->spi, &st->data[0], 3);
> +}
> +
> +static int admv1013_spi_write(struct admv1013_state *st, unsigned
> int reg,
> + unsigned int val)
> +{
> + int ret;
> +
> + mutex_lock(&st->lock);
> + ret = __admv1013_spi_write(st, reg, val);
> + mutex_unlock(&st->lock);
> +
> + return ret;
> +}
> +
> +static int __admv1013_spi_update_bits(struct admv1013_state *st,
> unsigned int reg,
> + unsigned int mask, unsigned int val)
> +{
> + int ret;
> + unsigned int data, temp;
> +
> + ret = __admv1013_spi_read(st, reg, &data);
> + if (ret)
> + return ret;
> +
> + temp = (data & ~mask) | (val & mask);
> +
> + return __admv1013_spi_write(st, reg, temp);
> +}
> +
> +static int admv1013_spi_update_bits(struct admv1013_state *st,
> unsigned int reg,
> + unsigned int mask, unsigned int val)
> +{
> + int ret;
> +
> + mutex_lock(&st->lock);
> + ret = __admv1013_spi_update_bits(st, reg, mask, val);
> + mutex_unlock(&st->lock);
> +
> + return ret;
> +}
> +
> +static int admv1013_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long info)
> +{
> + struct admv1013_state *st = iio_priv(indio_dev);
> + unsigned int data;
> + int ret;
> +
> + switch (info) {
> + case IIO_CHAN_INFO_OFFSET:
> + if (chan->channel2 == IIO_MOD_I) {
> + ret = admv1013_spi_read(st,
> ADMV1013_REG_OFFSET_ADJUST_I, &data);
> + if (ret)
> + return ret;
> +
> + *val =
> FIELD_GET(ADMV1013_MIXER_OFF_ADJ_I_P_MSK, data);
> + *val2 =
> FIELD_GET(ADMV1013_MIXER_OFF_ADJ_I_N_MSK, data);
> + } else {
> + ret = admv1013_spi_read(st,
> ADMV1013_REG_OFFSET_ADJUST_Q, &data);
> + if (ret)
> + return ret;
> +
> + *val =
> FIELD_GET(ADMV1013_MIXER_OFF_ADJ_Q_P_MSK, data);
> + *val2 =
> FIELD_GET(ADMV1013_MIXER_OFF_ADJ_Q_N_MSK, data);
> + }
> +
> + return IIO_VAL_INT_MULTIPLE;
> + case IIO_CHAN_INFO_PHASE:
> + if (chan->channel2 == IIO_MOD_I) {
> + ret = admv1013_spi_read(st,
> ADMV1013_REG_LO_AMP_I, &data);
> + if (ret)
> + return ret;
> +
> + *val =
> FIELD_GET(ADMV1013_LOAMP_PH_ADJ_I_FINE_MSK, data);
> + } else {
> + ret = admv1013_spi_read(st,
> ADMV1013_REG_LO_AMP_Q, &data);
> + if (ret)
> + return ret;
> +
> + *val =
> FIELD_GET(ADMV1013_LOAMP_PH_ADJ_Q_FINE_MSK, data);
> + }
> +
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int admv1013_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long info)
> +{
> + struct admv1013_state *st = iio_priv(indio_dev);
> + int ret;
> +
> + switch (info) {
> + case IIO_CHAN_INFO_OFFSET:
> + val2 /= 100000;
> +
> + if (chan->channel2 == IIO_MOD_I)
> + ret = admv1013_spi_update_bits(st,
> ADMV1013_REG_OFFSET_ADJUST_I,
> +
> ADMV1013_MIXER_OFF_ADJ_I_P_MSK |
> +
> ADMV1013_MIXER_OFF_ADJ_I_N_MSK,
> +
> FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_I_P_MSK, val) |
> +
> FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_I_N_MSK, val2));
> + else
> + ret = admv1013_spi_update_bits(st,
> ADMV1013_REG_OFFSET_ADJUST_Q,
> +
> ADMV1013_MIXER_OFF_ADJ_Q_P_MSK |
> +
> ADMV1013_MIXER_OFF_ADJ_Q_N_MSK,
> +
> FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_Q_P_MSK, val) |
> +
> FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_Q_N_MSK, val2));
> +
> + return ret;
> + case IIO_CHAN_INFO_PHASE:
> + if (chan->channel2 == IIO_MOD_I)
> + return admv1013_spi_update_bits(st,
> ADMV1013_REG_LO_AMP_I,
> +
> ADMV1013_LOAMP_PH_ADJ_I_FINE_MSK,
> +
> FIELD_PREP(ADMV1013_LOAMP_PH_ADJ_I_FINE_MSK, val));
> + else
> + return admv1013_spi_update_bits(st,
> ADMV1013_REG_LO_AMP_Q,
> +
> ADMV1013_LOAMP_PH_ADJ_Q_FINE_MSK,
> +
> FIELD_PREP(ADMV1013_LOAMP_PH_ADJ_Q_FINE_MSK, val));
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int admv1013_update_quad_filters(struct admv1013_state *st)
> +{
> + unsigned int filt_raw;
> + u64 rate = clk_get_rate(st->clkin);
> +
> + if (rate >= 5400000000 && rate <= 7000000000)
> + filt_raw = 15;
> + else if (rate >= 5400000000 && rate <= 8000000000)
> + filt_raw = 10;
> + else if (rate >= 6600000000 && rate <= 9200000000)
> + filt_raw = 5;
> + else
> + filt_raw = 0;
> +
> + return __admv1013_spi_update_bits(st,
> ADMV1013_REG_QUAD,
> +
> ADMV1013_QUAD_FILTERS_MSK,
> +
> FIELD_PREP(ADMV1013_QUAD_FILTERS_MSK, filt_raw));
> +}
> +
> +static int admv1013_update_mixer_vgate(struct admv1013_state *st)
> +{
> + unsigned int vcm, mixer_vgate;
> +
> + vcm = regulator_get_voltage(st->reg);
> +
> + if (vcm >= 0 && vcm < 1800000)
> + mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100;
> + else if (vcm > 1800000 && vcm < 2600000)
> + mixer_vgate = (2375 * vcm / 1000000 + 125) / 100;
> + else
> + return -EINVAL;
> +
> + return __admv1013_spi_update_bits(st,
> ADMV1013_REG_LO_AMP_I,
> + ADMV1013_MIXER_VGATE_MSK,
> +
> FIELD_PREP(ADMV1013_MIXER_VGATE_MSK, mixer_vgate));
> +}
> +
> +static int admv1013_reg_access(struct iio_dev *indio_dev,
> + unsigned int reg,
> + unsigned int write_val,
> + unsigned int *read_val)
> +{
> + struct admv1013_state *st = iio_priv(indio_dev);
> + int ret;
> +
> + if (read_val)
> + ret = admv1013_spi_read(st, reg, read_val);
> + else
> + ret = admv1013_spi_write(st, reg, write_val);
> +
> + return ret;
> +}
> +
> +static const struct iio_info admv1013_info = {
> + .read_raw = admv1013_read_raw,
> + .write_raw = admv1013_write_raw,
> + .debugfs_reg_access = &admv1013_reg_access,
> +};
> +
> +static int admv1013_freq_change(struct notifier_block *nb, unsigned
> long action, void *data)
> +{
> + struct admv1013_state *st = container_of(nb, struct
> admv1013_state, nb);
> + int ret;
> +
> + if (action == POST_RATE_CHANGE) {
> + mutex_lock(&st->lock);
> + ret =
> notifier_from_errno(admv1013_update_quad_filters(st));
> + mutex_unlock(&st->lock);
> + return ret;
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> +static void admv1013_clk_notifier_unreg(void *data)
> +{
> + struct admv1013_state *st = data;
> +
> + clk_notifier_unregister(st->clkin, &st->nb);
> +}
> +
> +#define ADMV1013_CHAN(_channel, rf_comp) { \
> + .type = IIO_ALTVOLTAGE, \
> + .modified = 1, \
> + .output = 1, \
> + .indexed = 1, \
> + .channel2 = IIO_MOD_##rf_comp, \
> + .channel = _channel, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PHASE) | \
> + BIT(IIO_CHAN_INFO_OFFSET) \
> + }
> +
> +static const struct iio_chan_spec admv1013_channels[] = {
> + ADMV1013_CHAN(0, I),
> + ADMV1013_CHAN(0, Q),
> +};
> +
> +static int admv1013_init(struct admv1013_state *st)
> +{
> + int ret;
> + unsigned int chip_id, enable_reg, enable_reg_msk;
> + struct spi_device *spi = st->spi;
> +
> + /* Perform a software reset */
> + ret = __admv1013_spi_update_bits(st,
> ADMV1013_REG_SPI_CONTROL,
> +
> ADMV1013_SPI_SOFT_RESET_MSK,
> +
> FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 1));
> + if (ret)
> + return ret;
> +
> + ret = __admv1013_spi_update_bits(st,
> ADMV1013_REG_SPI_CONTROL,
> +
> ADMV1013_SPI_SOFT_RESET_MSK,
> +
> FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 0));
> + if (ret)
> + return ret;
> +
> + ret = __admv1013_spi_read(st,
> ADMV1013_REG_SPI_CONTROL, &chip_id);
> + if (ret)
> + return ret;
> +
> + chip_id = FIELD_GET(ADMV1013_CHIP_ID_MSK, chip_id);
> + if (chip_id != ADMV1013_CHIP_ID) {
> + dev_err(&spi->dev, "Invalid Chip ID.\n");
> + return -EINVAL;
> + }
> +
> + ret = __admv1013_spi_write(st,
> ADMV1013_REG_VVA_TEMP_COMP, 0xE700);
> + if (ret)
> + return ret;
> +
> + ret = __admv1013_spi_update_bits(st,
> ADMV1013_REG_QUAD,
> +
> ADMV1013_QUAD_SE_MODE_MSK,
> +
> FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, st-
> >quad_se_mode));
> + if (ret)
> + return ret;
> +
> + ret = admv1013_update_mixer_vgate(st);
> + if (ret)
> + return ret;
> +
> + ret = admv1013_update_quad_filters(st);
> + if (ret)
> + return ret;
> +
> + enable_reg_msk = ADMV1013_VGA_PD_MSK |
> + ADMV1013_MIXER_PD_MSK |
> + ADMV1013_QUAD_PD_MSK |
> + ADMV1013_BG_PD_MSK |
> + ADMV1013_MIXER_IF_EN_MSK |
> + ADMV1013_DET_EN_MSK;
> +
> + enable_reg = FIELD_PREP(ADMV1013_VGA_PD_MSK, st-
> >vga_pd) |
> + FIELD_PREP(ADMV1013_MIXER_PD_MSK, st-
> >mixer_pd) |
> + FIELD_PREP(ADMV1013_QUAD_PD_MSK, st-
> >quad_pd ? 7 : 0) |
> + FIELD_PREP(ADMV1013_BG_PD_MSK, st-
> >bg_pd) |
> + FIELD_PREP(ADMV1013_MIXER_IF_EN_MSK,
> st->mixer_if_en) |
> + FIELD_PREP(ADMV1013_DET_EN_MSK, st-
> >det_en);
> +
> + return __admv1013_spi_update_bits(st,
> ADMV1013_REG_ENABLE, enable_reg_msk, enable_reg);
> +}
> +
> +static void admv1013_clk_disable(void *data)
> +{
> + clk_disable_unprepare(data);
> +}
> +
> +static void admv1013_reg_disable(void *data)
> +{
> + regulator_disable(data);
> +}
> +
> +static void admv1013_powerdown(void *data)
> +{
> + unsigned int enable_reg, enable_reg_msk;
> +
> + /* Disable all components in the Enable Register */
> + enable_reg_msk = ADMV1013_VGA_PD_MSK |
> + ADMV1013_MIXER_PD_MSK |
> + ADMV1013_QUAD_PD_MSK |
> + ADMV1013_BG_PD_MSK |
> + ADMV1013_MIXER_IF_EN_MSK |
> + ADMV1013_DET_EN_MSK;
> +
> + enable_reg = FIELD_PREP(ADMV1013_VGA_PD_MSK, 1) |
> + FIELD_PREP(ADMV1013_MIXER_PD_MSK, 1) |
> + FIELD_PREP(ADMV1013_QUAD_PD_MSK, 7) |
> + FIELD_PREP(ADMV1013_BG_PD_MSK, 1) |
> + FIELD_PREP(ADMV1013_MIXER_IF_EN_MSK,
> 0) |
> + FIELD_PREP(ADMV1013_DET_EN_MSK, 0);
> +
> + admv1013_spi_update_bits(data, ADMV1013_REG_ENABLE,
> enable_reg_msk, enable_reg);
> +}
> +
> +static int admv1013_properties_parse(struct admv1013_state *st)
> +{
> + int ret;
> + struct spi_device *spi = st->spi;
> +
> + st->vga_pd = device_property_read_bool(&spi->dev, "adi,vga-
> pd");
> + st->mixer_pd = device_property_read_bool(&spi->dev,
> "adi,mixer-pd");
> + st->quad_pd = device_property_read_bool(&spi->dev,
> "adi,quad-pd");
> + st->bg_pd = device_property_read_bool(&spi->dev, "adi,bg-
> pd");
> + st->mixer_if_en = device_property_read_bool(&spi->dev,
> "adi,mixer-if-en");
> + st->det_en = device_property_read_bool(&spi->dev, "adi,det-
> en");
> +
> + ret = device_property_read_u32(&spi->dev, "adi,quad-se-
> mode", &st->quad_se_mode);
> + if (ret)
> + st->quad_se_mode = 12;
> +
> + st->reg = devm_regulator_get(&spi->dev, "vcm");
> + if (IS_ERR(st->reg))
> + return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
> + "failed to get the common-mode
> voltage\n");
> +
> + st->clkin = devm_clk_get(&spi->dev, "lo_in");
> + if (IS_ERR(st->clkin))
> + return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
> + "failed to get the LO input clock\n");
> +
> + return 0;
> +}
> +
> +static int admv1013_probe(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev;
> + struct admv1013_state *st;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + st = iio_priv(indio_dev);
> +
> + indio_dev->dev.parent = &spi->dev;
not needed anymore...
> + indio_dev->info = &admv1013_info;
> + indio_dev->name = "admv1013";
> + indio_dev->channels = admv1013_channels;
> + indio_dev->num_channels =
> ARRAY_SIZE(admv1013_channels);
> +
> + st->spi = spi;
> +
> + ret = admv1013_properties_parse(st);
> + if (ret)
> + return ret;
> +
> + ret = regulator_enable(st->reg);
> + if (ret) {
> + dev_err(&spi->dev, "Failed to enable specified
> Common-Mode Voltage!\n");
> + return ret;
> + }
> +
> + ret = devm_add_action_or_reset(&spi->dev,
> admv1013_reg_disable,
> + st->reg);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(st->clkin);
> + if (ret)
> + return ret;
> +
> + ret = devm_add_action_or_reset(&spi->dev,
> admv1013_clk_disable, st->clkin);
> + if (ret)
> + return ret;
> +
> + st->nb.notifier_call = admv1013_freq_change;
> + ret = clk_notifier_register(st->clkin, &st->nb);
> + if (ret)
> + return ret;
> +
> + ret = devm_add_action_or_reset(&spi->dev,
> admv1013_clk_notifier_unreg, st);
> + if (ret)
> + return ret;
> +
> + mutex_init(&st->lock);
> +
> + ret = admv1013_init(st);
> + if (ret) {
> + dev_err(&spi->dev, "admv1013 init failed\n");
> + return ret;
> + }
> +
> + ret = devm_add_action_or_reset(&spi->dev,
> admv1013_powerdown, st);
> + if (ret)
> + return ret;
> +
> + return devm_iio_device_register(&spi->dev, indio_dev);
> +}
> +
> +static const struct spi_device_id admv1013_id[] = {
> + { "admv1013", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(spi, admv1013_id);
> +
> +static const struct of_device_id admv1013_of_match[] = {
> + { .compatible = "adi,admv1013" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, admv1013_of_match);
> +
> +static struct spi_driver admv1013_driver = {
> + .driver = {
> + .name = "admv1013",
> + .of_match_table = admv1013_of_match,
> + },
> + .probe = admv1013_probe,
> + .id_table = admv1013_id,
> +};
> +module_spi_driver(admv1013_driver);
> +
> +MODULE_AUTHOR("Antoniu Miclaus
> <antoniu.miclaus@...log.com");
> +MODULE_DESCRIPTION("Analog Devices ADMV1013");
> +MODULE_LICENSE("GPL v2");
> --
> 2.33.1
Powered by blists - more mailing lists