| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211103202819.326661-1-ariel.dalessandro@collabora.com>
Date: Wed, 3 Nov 2021 17:28:19 -0300
From: Ariel D'Alessandro <ariel.dalessandro@...labora.com>
To: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Cc: aisheng.dong@....com, ariel.dalessandro@...labora.com,
festevam@...il.com, ioana.ciornei@....com,
jagan@...rulasolutions.com, kernel@...gutronix.de, krzk@...nel.org,
linux-imx@....com, matt@...verse.com.au, matteo.lisi@...icam.com,
meenakshi.aggarwal@....com, michael@...rulasolutions.com,
nathan@...nel.org, robh+dt@...nel.org, s.hauer@...gutronix.de,
shawnguo@...nel.org, tharvey@...eworks.com
Subject: [PATCH] arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.
Add support for iMX8MN BSH SMM S2 board:
- 256 MiB DDR3 RAM
- 512 MiB NAND
- Megabit Ethernet PHY
- Wi-Fi 802.11 a/b/g/n/ac with Bluetooth 5.0
- USB-OTG (peripheral mode)
Add support for iMX8MN BSH SMM S2 PRO board:
- 512 MiB DDR3 RAM
- 8 GiB eMMC
- Megabit Ethernet PHY
- Wi-Fi 802.11 a/b/g/n/ac with Bluetooth 5.0
- USB-OTG (peripheral mode)
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@...labora.com>
Signed-off-by: Michael Trimarchi <michael@...rulasolutions.com>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../freescale/imx8mn-bsh-smm-s2-common.dtsi | 426 ++++++++++++++++++
.../boot/dts/freescale/imx8mn-bsh-smm-s2.dts | 48 ++
.../dts/freescale/imx8mn-bsh-smm-s2pro.dts | 80 ++++
4 files changed, 556 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index db9e36ebe932..6c51c5e2b943 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -45,6 +45,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
new file mode 100644
index 000000000000..108a29d4e7ae
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ fec_supply: fec_supply_en {
+ compatible = "regulator-fixed";
+ regulator-name = "tja1101_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&buck4_reg>;
+ enable-active-high;
+ };
+
+ usdhc2_pwrseq: usdhc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_pwrseq>;
+ reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_espi2>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ phy-supply = <&fec_supply>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <20>;
+ reset-deassert-us = <2000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: bd71847@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ buck1_reg: BUCK1 {
+ /* PMIC_BUCK1 - VDD_SOC */
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ /* PMIC_BUCK2 - VDD_ARM */
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck3_reg: BUCK3 {
+ /* PMIC_BUCK5 - VDD_DRAM_VPU_GPU */
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ /* PMIC_BUCK6 - VDD_3V3 */
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ /* PMIC_BUCK7 - VDD_1V8 */
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ /* PMIC_BUCK8 - NVCC_DRAM */
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ /* PMIC_LDO1 - NVCC_SNVS_1V8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ /* PMIC_LDO2 - VDD_SNVS_0V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ /* PMIC_LDO3 - VDDA_1V8 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ /* PMIC_LDO4 - VDD_MIPI_0V9 */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ /* PMIC_LDO6 - VDD_MIPI_1V2 */
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bluetooth>;
+ shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ max-speed = <3000000>;
+ };
+};
+
+/* Console */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_espi2: espi2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082
+ MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082
+ MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x082
+ MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x040
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c2
+ MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c2
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c2
+ MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c2
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400000c2
+ MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400000c2
+ >;
+ };
+
+ pinctrl_pmic: pmicirq {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x040
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040
+ MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040
+ >;
+ };
+
+ pinctrl_usdhc2_pwrseq: usdhc2pwrseqgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x040 /* WL_REG_ON */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x090
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d0
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d0
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d0
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d0
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x094
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d4
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d4
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d4
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d4
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x096
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d6
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d6
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d6
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d6
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d6
+ >;
+ };
+
+ pinctrl_wlan: wlangrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x0d6 /* GPIO_0 - WIFI_GPIO_0 */
+ MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x0d6 /* GPIO_1 - WIFI_GPIO_1 */
+ MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x0d6 /* BT_GPIO_5 - WIFI_GPIO_5 */
+ MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x0d6 /* I2S_CLK - WIFI_GPIO_6 */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x040
+ MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x040
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x040
+ MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x040
+ MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x040
+ MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x040
+ >;
+ };
+
+ pinctrl_bluetooth: bluetoothgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x044 /* BT_REG_ON */
+ MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x046 /* BT_DEV_WAKE */
+ MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x090 /* BT_HOST_WAKE */
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x046
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x002
+ MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x002
+ MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090
+ MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x090
+ MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER 0x090
+ MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x016
+ MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x016
+ MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x016
+ MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x016
+ MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x090
+ MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER 0x016
+ MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x150 /* RMII_INT - ENET_INT */
+ MX8MN_IOMUXC_SD2_WP_GPIO2_IO20 0x150 /* RMII_EN - ENET_EN */
+ MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x016 /* RMII_WAKE - GPIO_ENET_WAKE */
+ MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x016 /* RMII_RESET - GPIO_ENET_RST */
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
new file mode 100644
index 000000000000..33f98582eace
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+
+/ {
+ model = "BSH SMM S2";
+ compatible = "bsh,imx8mn-bsh-smm-s2", "fsl,imx8mn";
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x10000000>;
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_gpmi_nand: gpmi-nand {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096
+ MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096
+ MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE 0x00000096
+ MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x00000096
+ MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x00000096
+ MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x00000096
+ MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x00000096
+ MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x00000096
+ MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x00000096
+ MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x00000096
+ MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x00000096
+ MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x00000096
+ MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x00000056
+ MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x00000096
+ MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x00000096
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
new file mode 100644
index 000000000000..c6a8ed6745c1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+
+/ {
+ model = "BSH SMM S2 PRO";
+ compatible = "bsh,imx8mn-bsh-smm-s2pro", "fsl,imx8mn";
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x20000000>;
+ };
+};
+
+/* eMMC */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000090
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d0
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0d0
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0d0
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0d0
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0d0
+ MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0d0
+ MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0d0
+ MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0d0
+ MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0d0
+ MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x090
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000094
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d4
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0d4
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0d4
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0d4
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0d4
+ MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0d4
+ MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0d4
+ MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0d4
+ MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0d4
+ MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x094
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000096
+ MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d6
+ MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0d6
+ MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0d6
+ MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0d6
+ MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0d6
+ MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0d6
+ MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0d6
+ MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0d6
+ MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0d6
+ MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x096
+ >;
+ };
+};
--
2.30.2
Powered by blists - more mailing lists