| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1636208598-18234-3-git-send-email-tony.huang@sunplus.com>
Date: Sat, 6 Nov 2021 22:23:18 +0800
From: Tony Huang <tonyhuang.sunplus@...il.com>
To: ulf.hansson@...aro.org, robh+dt@...nel.org,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, p.zabel@...gutronix.de
Cc: wells.lu@...plus.com, Tony Huang <tony.huang@...plus.com>
Subject: [PATCH 2/2] mmc: Add mmc driver for Sunplus SP7021
Add mmc driver for Sunplus SP7021
Signed-off-by: Tony Huang <tony.huang@...plus.com>
---
MAINTAINERS | 2 +
drivers/mmc/host/Kconfig | 9 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sunplus_mmc.c | 1593 ++++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/sunplus_mmc.h | 181 +++++
5 files changed, 1786 insertions(+)
create mode 100644 drivers/mmc/host/sunplus_mmc.c
create mode 100644 drivers/mmc/host/sunplus_mmc.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 179e60a..47dc9ec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17949,6 +17949,8 @@ SUNPLUS MMC DRIVER
M: Tony Huang <tony.huang@...plus.com>
S: Maintained
F: Documentation/devicetree/bindings/mmc/sunplu-mmc.yaml
+F: drivers/mmc/host/sunplus_mmc.c
+F: drivers/mmc/host/sunplus_mmc.h
SUPERH
M: Yoshinori Sato <ysato@...rs.sourceforge.jp>
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index ccc148c..2a78cbc 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -14,6 +14,15 @@ config MMC_DEBUG
added host drivers please don't invent their private macro for
debugging.
+config MMC_SUNPLUS
+ tristate "Sunplus SP7021 MMC Controller"
+ depends on ARCH_SUNPLUS || SOC_I143 || SOC_Q645
+ default y
+ help
+ If you say yes here, you will get support for eMMC host interface
+ on sunplus Socs.
+ If unsure, say N.
+ Sunplus eMMC Host Controller v4.51 support"
config MMC_ARMMMCI
tristate "ARM AMBA Multimedia Card Interface support"
depends on ARM_AMBA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 14004cc..5de6788 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o
obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o
obj-$(CONFIG_MMC_SDHCI_OMAP) += sdhci-omap.o
obj-$(CONFIG_MMC_SDHCI_SPRD) += sdhci-sprd.o
+obj-$(CONFIG_MMC_SUNPLUS) += sunplus_mmc.o
obj-$(CONFIG_MMC_CQHCI) += cqhci.o
cqhci-y += cqhci-core.o
cqhci-$(CONFIG_MMC_CRYPTO) += cqhci-crypto.o
diff --git a/drivers/mmc/host/sunplus_mmc.c b/drivers/mmc/host/sunplus_mmc.c
new file mode 100644
index 0000000..05cc5a4
--- /dev/null
+++ b/drivers/mmc/host/sunplus_mmc.c
@@ -0,0 +1,1593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * (C) Copyright 2019 Sunplus Technology. <http://www.sunplus.com/>
+ *
+ * Sunplus SD host controller v3.0
+ *
+ */
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <linux/reset.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+
+#include "sunplus_mmc.h"
+
+enum loglevel {
+ SPMMC_LOG_OFF,
+ SPMMC_LOG_ERROR,
+ SPMMC_LOG_WARNING,
+ SPMMC_LOG_INFO,
+ SPMMC_LOG_DEBUG,
+ SPMMC_LOG_VERBOSE,
+ SPMMC_LOG_MAX
+};
+static int loglevel = SPMMC_LOG_WARNING;
+
+/**
+ * we do not need `SPMMC_LOG_' prefix here, when specify @level.
+ */
+#define spmmc_pr(level, fmt, ...) \
+ do { \
+ if (unlikely(SPMMC_LOG_##level <= loglevel)) \
+ pr_info("SPMMC [" #level "] " fmt, ##__VA_ARGS__); \
+ } while (0)
+
+static const u8 tuning_blk_pattern_4bit[] = {
+ 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
+ 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
+ 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
+ 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
+ 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
+ 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
+ 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
+ 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
+};
+
+static const u8 tuning_blk_pattern_8bit[] = {
+ 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
+ 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
+ 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
+ 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
+ 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
+ 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
+ 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
+ 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
+ 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
+ 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
+ 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
+ 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
+ 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
+ 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
+ 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
+ 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
+};
+
+/* Produces a mask of set bits covering a range of a 32-bit value */
+static inline u32 bitfield_mask(u32 shift, u32 width)
+{
+ return ((1 << width) - 1) << shift;
+}
+
+/* Extract the value of a bitfield found within a given register value */
+static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width)
+{
+ return (reg_val & bitfield_mask(shift, width)) >> shift;
+}
+
+/* Replace the value of a bitfield found within a given register value */
+static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val)
+{
+ u32 mask = bitfield_mask(shift, width);
+
+ return (reg_val & ~mask) | (val << shift);
+}
+/* for register value with mask bits */
+#define __bitfield_replace(value, shift, width, new_value) \
+ (bitfield_replace(value, shift, width, new_value)|bitfield_mask(shift+16, width))
+
+#ifdef SPMMC_DEBUG
+#define SPMMC_REG_SIZE (sizeof(struct spmmc_regs)) /* register address space size */
+#define SPMMC_REG_GRPS (sizeof(struct spmmc_regs) / 128) /* we organize 32 registers as a group */
+#define SPMMC_REG_CNT (sizeof(struct spmmc_regs) / 4) /* total registers */
+
+/**
+ * dump a range of registers.
+ * @host: host
+ * @start_group: dump start from which group, base is 0
+ * @start_reg: dump start from which register in @start_group
+ * @len: how many registers to dump
+ */
+static void spmmc_dump_regs(struct spmmc_host *host, int start_group, int start_reg, int len)
+{
+ u32 *p = (u32 *)host->base;
+ u32 *reg_end = p + SPMMC_REG_CNT;
+ u32 *end;
+ int groups;
+ int i, j;
+
+ if (start_group > SPMMC_REG_GRPS || start_reg > 31)
+ return;
+ p += start_group * 32 + start_reg;
+ if (p > reg_end)
+ return;
+ end = p + len;
+ groups = (len + 31) / 32;
+ pr_info("groups = %d\n", groups);
+ pr_info("### dump sd card controller registers start ###\n");
+ for (i = 0; i < groups; i++) {
+ for (j = start_reg; j < 32 && p < end; j++) {
+ pr_info("g%02d.%02d = 0x%08x\n", i+start_group, j, readl(p));
+ p++;
+ }
+ start_reg = 0;
+ }
+ pr_info("### dump sd card controller registers end ###\n");
+}
+#endif /* ifdef SPMMC_DEBUG */
+
+/**
+ * wait for transaction done, return -1 if error.
+ */
+static inline int spmmc_wait_finish(struct spmmc_host *host)
+{
+ /* Wait for transaction finish */
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+
+ while (!time_after(jiffies, timeout)) {
+ if (readl(&host->base->sd_state) & SPMMC_SDSTATE_FINISH)
+ return 0;
+ if (readl(&host->base->sd_state) & SPMMC_SDSTATE_ERROR)
+ return -1;
+ }
+ return -1;
+}
+
+static inline int spmmc_wait_sdstatus(struct spmmc_host *host, unsigned int status_bit)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+
+ while (!time_after(jiffies, timeout)) {
+ if (readl(&host->base->sd_status) & status_bit)
+ return 0;
+ if (readl(&host->base->sd_state) & SPMMC_SDSTATE_ERROR)
+ return -1;
+ }
+ return -1;
+}
+
+#define spmmc_wait_rspbuf_full(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_RSP_BUF_FULL)
+#define spmmc_wait_rxbuf_full(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_RX_DATA_BUF_FULL)
+#define spmmc_wait_txbuf_empty(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY)
+
+static void spmmc_get_rsp(struct spmmc_host *host, struct mmc_command *cmd)
+{
+ u32 value0_3, value4_5;
+
+ if (unlikely(!(cmd->flags & MMC_RSP_PRESENT)))
+ return;
+ if (unlikely(cmd->flags & MMC_RSP_136)) {
+ if (spmmc_wait_rspbuf_full(host))
+ return;
+ value0_3 = readl(&host->base->sd_rspbuf0_3);
+ value4_5 = readl(&host->base->sd_rspbuf4_5) & 0xffff;
+ cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8);
+ cmd->resp[1] = value4_5 << 24;
+ value0_3 = readl(&host->base->sd_rspbuf0_3);
+ value4_5 = readl(&host->base->sd_rspbuf4_5) & 0xffff;
+ cmd->resp[1] |= value0_3 >> 8;
+ cmd->resp[2] = value0_3 << 24;
+ cmd->resp[2] |= value4_5 << 8;
+ value0_3 = readl(&host->base->sd_rspbuf0_3);
+ value4_5 = readl(&host->base->sd_rspbuf4_5) & 0xffff;
+ cmd->resp[2] |= value0_3 >> 24;
+ cmd->resp[3] = value0_3 << 8;
+ cmd->resp[3] |= value4_5 >> 8;
+ } else {
+ if (spmmc_wait_rspbuf_full(host))
+ return;
+ value0_3 = readl(&host->base->sd_rspbuf0_3);
+ value4_5 = readl(&host->base->sd_rspbuf4_5) & 0xffff;
+ cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8);
+ cmd->resp[1] = value4_5 << 24;
+ }
+ //return;
+}
+
+static void spmmc_set_bus_clk(struct spmmc_host *host, int clk)
+{
+ unsigned int clkdiv;
+ int f_min = host->mmc->f_min;
+ int f_max = host->mmc->f_max;
+ u32 value = readl(&host->base->sd_config0);
+
+ if (clk < f_min)
+ clk = f_min;
+ if (clk > f_max)
+ clk = f_max;
+ spmmc_pr(INFO, "set bus clock to %d\n", clk);
+ #ifdef CONFIG_SOC_SP7021
+ clkdiv = (clk_get_rate(host->clk)+clk)/clk-1;
+ #endif
+ #ifdef CONFIG_SOC_I143
+ clkdiv = (SPMMC_SYS_CLK/clk)-1;
+ #endif
+ #ifdef CONFIG_SOC_Q645
+ clkdiv = (clk_get_rate(host->clk)+clk)/clk-1;
+ #endif
+ spmmc_pr(INFO, "clkdiv= %d\n", clkdiv);
+ if (clkdiv > 0xfff) {
+ spmmc_pr(WARNING, "clock %d is too low to be set!\n", clk);
+ clkdiv = 0xfff;
+ }
+ value = bitfield_replace(value, 20, 12, clkdiv);
+ writel(value, &host->base->sd_config0);
+
+ /* In order to reduce the frequency of context switch,
+ * if it is high speed or upper, we do not use interrupt
+ * when send a command that without data transferring.
+ */
+ if (clk > 25000000)
+ host->use_int = 0;
+ else
+ host->use_int = 1;
+}
+
+static void spmmc_set_bus_timing(struct spmmc_host *host, unsigned int timing)
+{
+ u32 value = readl(&host->base->sd_config1);
+ int clkdiv = readl(&host->base->sd_config0) >> 20;
+ int delay = clkdiv/2 < 7 ? clkdiv/2 : 7;
+ int hs_en = 1;
+ char *timing_name;
+
+ host->ddr_enabled = 0;
+ switch (timing) {
+ case MMC_TIMING_LEGACY:
+ hs_en = 0;
+ timing_name = "legacy";
+ break;
+ case MMC_TIMING_MMC_HS:
+ timing_name = "mmc high-speed";
+ break;
+ case MMC_TIMING_SD_HS:
+ timing_name = "sd high-speed";
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ timing_name = "sd uhs SDR50";
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ timing_name = "sd uhs SDR104";
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ host->ddr_enabled = 1;
+ timing_name = "sd uhs DDR50";
+ break;
+ case MMC_TIMING_MMC_DDR52:
+ host->ddr_enabled = 1;
+ timing_name = "mmc DDR52";
+ break;
+ case MMC_TIMING_MMC_HS200:
+ timing_name = "mmc HS200";
+ break;
+ default:
+ timing_name = "invalid";
+ hs_en = 0;
+ break;
+ }
+
+ if (hs_en) {
+ value = bitfield_replace(value, 31, 1, 1); /* sd_high_speed_en */
+ writel(value, &host->base->sd_config1);
+ value = readl(&host->base->sd_timing_config0);
+ value = bitfield_replace(value, 4, 3, delay); /* sd_wr_dat_dly_sel */
+ value = bitfield_replace(value, 8, 3, delay); /* sd_wr_cmd_dly_sel */
+ writel(value, &host->base->sd_timing_config0);
+ } else {
+ value = bitfield_replace(value, 31, 1, 0);
+ writel(value, &host->base->sd_config1);
+ }
+ if (host->ddr_enabled) {
+ value = readl(&host->base->sd_config0);
+ value = bitfield_replace(value, 1, 1, 1); /* sdddrmode */
+ writel(value, &host->base->sd_config0);
+ } else {
+ value = readl(&host->base->sd_config0);
+ value = bitfield_replace(value, 1, 1, 0);
+ writel(value, &host->base->sd_config0);
+ }
+ spmmc_pr(INFO, "set bus timing to %s\n", timing_name);
+}
+
+static void spmmc_set_bus_width(struct spmmc_host *host, int width)
+{
+ u32 value = readl(&host->base->sd_config0);
+ int bus_width;
+
+ switch (width) {
+ case MMC_BUS_WIDTH_8:
+ value = bitfield_replace(value, 11, 1, 0);
+ value = bitfield_replace(value, 18, 1, 1);
+ bus_width = 8;
+ break;
+ case MMC_BUS_WIDTH_4:
+ value = bitfield_replace(value, 11, 1, 1);
+ value = bitfield_replace(value, 18, 1, 0);
+ bus_width = 4;
+ break;
+ default:
+ value = bitfield_replace(value, 11, 1, 0);
+ value = bitfield_replace(value, 18, 1, 0);
+ bus_width = 1;
+ break;
+ };
+ spmmc_pr(INFO, "set bus width to %d bit(s)\n", bus_width);
+ writel(value, &host->base->sd_config0);
+}
+
+/**
+ * select the working mode of controller: sd/sdio/emmc
+ */
+static void spmmc_select_mode(struct spmmc_host *host, int mode)
+{
+ u32 value = readl(&host->base->sd_config0);
+
+ host->mode = mode;
+ /* set `sdmmcmode', as it will sample data at fall edge */
+ /* of SD bus clock if `sdmmcmode' is not set when */
+ /* `sd_high_speed_en' is not set, which is not compliant */
+ /* with SD specification */
+ value = bitfield_replace(value, 10, 1, 1);
+ switch (mode) {
+ case SPMMC_MODE_EMMC:
+ value = bitfield_replace(value, 9, 1, 0);
+ writel(value, &host->base->sd_config0);
+ break;
+ case SPMMC_MODE_SDIO:
+ value = bitfield_replace(value, 9, 1, 1);
+ writel(value, &host->base->sd_config0);
+ value = readl(&host->base->sdio_ctrl);
+ value = bitfield_replace(value, 6, 1, 1); /* int_multi_trig */
+ writel(value, &host->base->sdio_ctrl);
+ break;
+ case SPMMC_MODE_SD:
+ default:
+ value = bitfield_replace(value, 9, 1, 0);
+ writel(value, &host->base->sd_config0);
+ break;
+ }
+}
+
+static void spmmc_sw_reset(struct spmmc_host *host)
+{
+ u32 value;
+
+ spmmc_pr(DEBUG, "sw reset\n");
+ /* Must reset dma operation first, or it will*/
+ /* be stuck on sd_state == 0x1c00 because of*/
+ /* a controller software reset bug */
+ value = readl(&host->base->hw_dma_ctrl);
+ value = bitfield_replace(value, 10, 1, 1);
+ writel(value, &host->base->hw_dma_ctrl);
+ value = bitfield_replace(value, 10, 1, 0);
+ writel(value, &host->base->hw_dma_ctrl);
+ value = readl(&host->base->hw_dma_ctrl);
+ value = bitfield_replace(value, 9, 1, 1);
+ writel(value, &host->base->hw_dma_ctrl);
+ writel(0x7, &host->base->sd_rst);
+ while (readl(&host->base->sd_hw_state) & BIT(6))
+ ;
+ spmmc_pr(DEBUG, "sw reset done\n");
+}
+
+static void spmmc_prepare_cmd(struct spmmc_host *host, struct mmc_command *cmd)
+{
+
+ u32 value;
+
+ /* add start bit, according to spec, command format */
+ value = ((cmd->opcode | 0x40) << 24) | (cmd->arg >> 8);
+ writel(value, &host->base->sd_cmdbuf0_3);
+ writeb(cmd->arg & 0xff, &host->base->sd_cmdbuf4);
+
+ /* disable interrupt if needed */
+ value = readl(&host->base->sd_int);
+ value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */
+ if (likely(!host->use_int || cmd->flags & MMC_RSP_136))
+ value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */
+ else
+ value = bitfield_replace(value, 0, 1, 1);
+ writel(value, &host->base->sd_int);
+
+ value = readl(&host->base->sd_config0);
+ value = bitfield_replace(value, 4, 2, 0); /* sd_trans_mode */
+ value = bitfield_replace(value, 7, 1, 1); /* sdcmddummy */
+ if (likely(cmd->flags & MMC_RSP_PRESENT)) {
+ value = bitfield_replace(value, 6, 1, 1); /* sdautorsp */
+ } else {
+ value = bitfield_replace(value, 6, 1, 0);
+ writel(value, &host->base->sd_config0);
+ return;
+ }
+ /*
+ * Currently, host is not capable of checking R2's CRC7,
+ * thus, enable crc7 check only for 48 bit response commands
+ */
+ if (likely(cmd->flags & MMC_RSP_CRC && !(cmd->flags & MMC_RSP_136)))
+ value = bitfield_replace(value, 8, 1, 1); /* sdrspchk_en */
+ else
+ value = bitfield_replace(value, 8, 1, 0);
+
+ if (unlikely(cmd->flags & MMC_RSP_136))
+ value = bitfield_replace(value, 15, 1, 1); /* sdrsptype */
+ else
+ value = bitfield_replace(value, 15, 1, 0);
+ writel(value, &host->base->sd_config0);
+}
+
+static void spmmc_prepare_data(struct spmmc_host *host, struct mmc_data *data)
+{
+ u32 value, srcdst;
+ //struct mmc_command *cmd = data->mrq->cmd;
+
+ writel(data->blocks - 1, &host->base->sd_page_num);
+ writel(data->blksz - 1, &host->base->sd_blocksize);
+ value = readl(&host->base->sd_config0);
+ if (data->flags & MMC_DATA_READ) {
+ value = bitfield_replace(value, 4, 2, 2); /* sd_trans_mode */
+ value = bitfield_replace(value, 6, 1, 0); /* sdautorsp */
+ value = bitfield_replace(value, 7, 1, 0); /* sdcmddummy */
+ srcdst = readl(&host->base->card_mediatype_srcdst);
+ srcdst = bitfield_replace(srcdst, 4, 7, 0x12);
+ writel(srcdst, &host->base->card_mediatype_srcdst);
+ } else {
+ value = bitfield_replace(value, 4, 2, 1);
+ srcdst = readl(&host->base->card_mediatype_srcdst);
+ srcdst = bitfield_replace(srcdst, 4, 7, 0x21);
+ writel(srcdst, &host->base->card_mediatype_srcdst);
+ }
+ value = bitfield_replace(value, 2, 1, 1);
+ if (likely(host->dmapio_mode == SPMMC_DMA_MODE)) {
+ struct scatterlist *sg;
+ dma_addr_t dma_addr;
+ unsigned int dma_size;
+ u32 *reg_addr;
+ int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ int i, count = 1;
+
+ count = dma_map_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction);
+ if (unlikely(!count || count > SPMMC_MAX_DMA_MEMORY_SECTORS)) {
+ spmmc_pr(ERROR, "error occurred at dma_mapp_sg: count = %d\n", count);
+ data->error = -EINVAL;
+ return;
+ }
+ for_each_sg(data->sg, sg, count, i) {
+ dma_addr = sg_dma_address(sg);
+ dma_size = sg_dma_len(sg) / 512 - 1;
+ if (i == 0) {
+ writel(dma_addr, &host->base->dma_base_addr);
+ writel(dma_size, &host->base->sdram_sector_0_size);
+ } else {
+ reg_addr = &host->base->sdram_sector_1_addr + (i - 1) * 2;
+ writel(dma_addr, reg_addr);
+ writel(dma_size, reg_addr + 1);
+ }
+ }
+ value = bitfield_replace(value, 0, 1, 0); /* sdpiomode */
+ writel(value, &host->base->sd_config0);
+ /* enable interrupt if needed */
+ if (!host->use_int && data->blksz * data->blocks > host->dma_int_threshold) {
+ host->dma_use_int = 1;
+ value = readl(&host->base->sd_int);
+ value = bitfield_replace(value, 0, 1, 1); /* sdcmpen */
+ writel(value, &host->base->sd_int);
+ }
+ } else {
+ value = bitfield_replace(value, 0, 1, 1);
+ value = bitfield_replace(value, 14, 1, 1); /* rx4_en */
+ writel(value, &host->base->sd_config0);
+ }
+}
+
+static inline void spmmc_trigger_transaction(struct spmmc_host *host)
+{
+ u32 value = readl(&host->base->sd_ctrl);
+
+ value = bitfield_replace(value, 0, 1, 1); /* trigger transaction */
+ writel(value, &host->base->sd_ctrl);
+}
+
+static void __send_stop_cmd(struct spmmc_host *host)
+{
+ struct mmc_command stop = {};
+ u32 value;
+
+ stop.opcode = MMC_STOP_TRANSMISSION;
+ stop.arg = 0;
+ stop.flags = MMC_RSP_R1B;
+ spmmc_prepare_cmd(host, &stop);
+ value = readl(&host->base->sd_int);
+ value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */
+ writel(value, &host->base->sd_int);
+ spmmc_trigger_transaction(host);
+ spmmc_wait_finish(host);
+}
+
+/**
+ * check if error occurred during transaction.
+ * @host - host
+ * @mrq - the mrq
+ * @return 0 if no error otherwise the error number.
+ */
+static int spmmc_check_error(struct spmmc_host *host, struct mmc_request *mrq)
+{
+ int ret = 0;
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+
+ u32 value = readl(&host->base->sd_state);
+ u32 crc_token = bitfield_extract(value, 4, 3);
+
+ if (unlikely(value & SPMMC_SDSTATE_ERROR)) {
+ u32 timing_cfg0 = 0;
+
+ spmmc_pr(DEBUG, "%s cmd %d with data %p error!\n", __func__, cmd->opcode, data);
+ spmmc_pr(VERBOSE, "%s sd_state: 0x%08x\n", __func__, value);
+ value = readl(&host->base->sd_status);
+ spmmc_pr(VERBOSE, "%s sd_status: 0x%08x\n", __func__, value);
+
+ if (host->tuning_info.enable_tuning) {
+ timing_cfg0 = readl(&host->base->sd_timing_config0);
+ host->tuning_info.rd_crc_dly = bitfield_extract(timing_cfg0, 20, 3);
+ host->tuning_info.rd_dat_dly = bitfield_extract(timing_cfg0, 16, 3);
+ host->tuning_info.rd_rsp_dly = bitfield_extract(timing_cfg0, 12, 3);
+ host->tuning_info.wr_cmd_dly = bitfield_extract(timing_cfg0, 8, 3);
+ host->tuning_info.wr_dat_dly = bitfield_extract(timing_cfg0, 4, 3);
+ }
+
+ if (value & SPMMC_SDSTATUS_RSP_TIMEOUT) {
+ ret = -ETIMEDOUT;
+ host->tuning_info.wr_cmd_dly++;
+ } else if (value & SPMMC_SDSTATUS_RSP_CRC7_ERROR) {
+ ret = -EILSEQ;
+ host->tuning_info.rd_rsp_dly++;
+ } else if (data) {
+ if ((value & SPMMC_SDSTATUS_STB_TIMEOUT)) {
+ ret = -ETIMEDOUT;
+ host->tuning_info.rd_dat_dly++;
+ } else if (value & SPMMC_SDSTATUS_RDATA_CRC16_ERROR) {
+ ret = -EILSEQ;
+ host->tuning_info.rd_dat_dly++;
+ } else if (value & SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT) {
+ ret = -ETIMEDOUT;
+ host->tuning_info.rd_crc_dly++;
+ } else if (value & SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR) {
+ ret = -EILSEQ;
+ if (crc_token == 0x5)
+ host->tuning_info.wr_dat_dly++;
+ else
+ host->tuning_info.rd_crc_dly++;
+ }
+ }
+ cmd->error = ret;
+ if (data) {
+ data->error = ret;
+ data->bytes_xfered = 0;
+ }
+ if (!host->tuning_info.need_tuning && host->tuning_info.enable_tuning)
+ cmd->retries = SPMMC_MAX_RETRIES; /* retry it */
+ spmmc_sw_reset(host);
+ mdelay(5);
+
+ if (host->tuning_info.enable_tuning) {
+ timing_cfg0 = bitfield_replace(timing_cfg0, 20, 3,
+ host->tuning_info.rd_crc_dly);
+ timing_cfg0 = bitfield_replace(timing_cfg0, 16, 3,
+ host->tuning_info.rd_dat_dly);
+ timing_cfg0 = bitfield_replace(timing_cfg0, 12, 3,
+ host->tuning_info.rd_rsp_dly);
+ timing_cfg0 = bitfield_replace(timing_cfg0, 8, 3,
+ host->tuning_info.wr_cmd_dly);
+ timing_cfg0 = bitfield_replace(timing_cfg0, 4, 3,
+ host->tuning_info.wr_dat_dly);
+ writel(timing_cfg0, &host->base->sd_timing_config0);
+ }
+
+
+ } else if (data) {
+ data->error = 0;
+ data->bytes_xfered = data->blocks * data->blksz;
+ }
+ host->tuning_info.need_tuning = ret;
+ /* controller will not send cmd 12 automatically if error occurred */
+ if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
+ cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) {
+ __send_stop_cmd(host);
+ spmmc_sw_reset(host);
+ }
+ return ret;
+}
+
+/**
+ * the strategy is:
+ * 1. if several continuous delays are acceptable, we choose a middle one;
+ * 2. otherwise, we choose the first one.
+ */
+static inline int __find_best_delay(u8 candidate_dly)
+{
+ int f, w;
+
+ if (!candidate_dly)
+ return 0;
+ f = ffs(candidate_dly) - 1;
+ w = hweight8(candidate_dly);
+ if (0xff == (bitfield_mask(f, w) & ~candidate_dly))
+ return (f + w / 2);
+ else
+ return (f);
+}
+
+static inline __maybe_unused void spmmc_txdummy(struct spmmc_host *host, int count)
+{
+ u32 value;
+
+ count &= 0x1ff;
+ value = readl(&host->base->sd_config1);
+ value = bitfield_replace(value, 0, 9, count);
+ writel(value, &host->base->sd_config1);
+ value = readl(&host->base->sd_ctrl);
+ value = bitfield_replace(value, 1, 1, 1); /* trigger tx dummy */
+ writel(value, &host->base->sd_ctrl);
+}
+
+static void spmmc_xfer_data_pio(struct spmmc_host *host, struct mmc_data *data)
+{
+ u32 *buf; /* tx/rx 4 bytes one time in pio mode */
+ int data_left = data->blocks * data->blksz;
+ int consumed, remain;
+
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ unsigned int flags = 0;
+
+ if (data->flags & MMC_DATA_WRITE)
+ flags |= SG_MITER_FROM_SG;
+ else
+ flags |= SG_MITER_TO_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ while (data_left > 0) {
+ consumed = 0;
+ if (!sg_miter_next(sg_miter))
+ break;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ do {
+ if (data->flags & MMC_DATA_WRITE) {
+ if (spmmc_wait_txbuf_empty(host))
+ goto done;
+ writel(*buf, &host->base->sd_piodatatx);
+ } else {
+ if (spmmc_wait_rxbuf_full(host))
+ goto done;
+ *buf = readl(&host->base->sd_piodatarx);
+ }
+ buf++;
+ consumed += 4;
+ remain -= 4;
+ } while (remain);
+ sg_miter->consumed = consumed;
+ data_left -= consumed;
+ }
+done:
+ sg_miter_stop(sg_miter);
+}
+
+static void spmmc_controller_init(struct spmmc_host *host)
+{
+ u32 value;
+ int ret = reset_control_assert(host->rstc);
+
+ if (!ret) {
+ mdelay(1);
+ ret = reset_control_deassert(host->rstc);
+ }
+ if (ret)
+ spmmc_pr(WARNING, "Failed to reset SD controller!\n");
+ value = readl(&host->base->card_mediatype_srcdst);
+ value = bitfield_replace(value, 0, 3, SPMMC_MEDIA_SD);
+ writel(value, &host->base->card_mediatype_srcdst);
+ host->signal_voltage = MMC_SIGNAL_VOLTAGE_330;
+#ifdef SPMMC_EMMC_VCCQ_1V8
+ /* Because we do not have a regulator to change the voltage at
+ * runtime, we can only rely on hardware circuit to ensure that
+ * the eMMC's Vccq is 1.8V and use the macro `SPMMC_EMMC_VCCQ_1V8'
+ * to indicate that. Set signal voltage to 1.8V here.
+ */
+ if (host->mode == SPMMC_MODE_EMMC) {
+ value = readl(&host->base->sd_vol_ctrl);
+ value = bitfield_replace(value, 2, 1, 1);
+ writel(value, &host->base->sd_vol_ctrl);
+ host->signal_voltage = MMC_SIGNAL_VOLTAGE_180;
+ spmmc_pr(INFO, "use signal voltage 1.8V for eMMC\n");
+ }
+#endif
+}
+
+static void spmmc_set_power_mode(struct spmmc_host *host, struct mmc_ios *ios)
+{
+ if (host->power_state == ios->power_mode)
+ return;
+
+ switch (ios->power_mode) {
+ /* power off->up->on */
+ case MMC_POWER_ON:
+ spmmc_pr(DEBUG, "set MMC_POWER_ON\n");
+ spmmc_controller_init(host);
+ pm_runtime_get_sync(host->mmc->parent);
+ break;
+ case MMC_POWER_UP:
+ spmmc_pr(DEBUG, "set MMC_POWER_UP\n");
+ break;
+ case MMC_POWER_OFF:
+ spmmc_pr(DEBUG, "set MMC_POWER_OFF\n");
+ pm_runtime_put(host->mmc->parent);
+ break;
+ }
+ host->power_state = ios->power_mode;
+}
+
+/**
+ * 1. unmap scatterlist if needed;
+ * 2. get response & check error conditions;
+ * 3. unlock host->mrq_lock
+ * 4. notify mmc layer the request is done
+ */
+static void spmmc_finish_request(struct spmmc_host *host, struct mmc_request *mrq)
+{
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ if (!mrq)
+ return;
+
+ cmd = mrq->cmd;
+ data = mrq->data;
+
+ if (data && SPMMC_DMA_MODE == host->dmapio_mode) {
+ int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ dma_unmap_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction);
+ host->dma_use_int = 0;
+ }
+ spmmc_get_rsp(host, cmd);
+ spmmc_check_error(host, mrq);
+ host->mrq = NULL;
+ mutex_unlock(&host->mrq_lock);
+ spmmc_pr(VERBOSE, "request done > error:%d, cmd:%d, resp:0x%08x\n",
+ cmd->error, cmd->opcode, cmd->resp[0]);
+ mmc_request_done(host->mmc, mrq);
+}
+
+/* Interrupt Service Routine */
+irqreturn_t spmmc_irq(int irq, void *dev_id)
+{
+ struct spmmc_host *host = dev_id;
+ u32 value = readl(&host->base->sd_int);
+
+ spin_lock(&host->lock);
+ if ((value & SPMMC_SDINT_SDCMP) &&
+ (value & SPMMC_SDINT_SDCMPEN)) {
+ value = bitfield_replace(value, 0, 1, 0); /* disable sdcmp */
+ value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */
+ writel(value, &host->base->sd_int);
+ /* if error occurred, we my need send cmd 12 to stop data transaction,*/
+ /* which is time consuming, so make use of tasklet to handle this.*/
+ if (unlikely(readl(&host->base->sd_state) & SPMMC_SDSTATE_ERROR))
+ tasklet_schedule(&host->tsklet_finish_req);
+ else
+ spmmc_finish_request(host, host->mrq);
+ }
+ if (value & SPMMC_SDINT_SDIO &&
+ (value & SPMMC_SDINT_SDIOEN)) {
+ mmc_signal_sdio_irq(host->mmc);
+ }
+ spin_unlock(&host->lock);
+ return IRQ_HANDLED;
+}
+
+static void spmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct spmmc_host *host = mmc_priv(mmc);
+ struct mmc_data *data;
+ struct mmc_command *cmd;
+
+ mutex_lock_interruptible(&host->mrq_lock);
+ host->mrq = mrq;
+ data = mrq->data;
+ cmd = mrq->cmd;
+ spmmc_pr(VERBOSE, "%s > cmd:%d, arg:0x%08x, data len:%d\n", __func__,
+ cmd->opcode, cmd->arg, data ? (data->blocks*data->blksz) : 0);
+
+ spmmc_prepare_cmd(host, cmd);
+ /* we need manually read response R2. */
+ if (unlikely(cmd->flags & MMC_RSP_136)) {
+ spmmc_trigger_transaction(host);
+ spmmc_get_rsp(host, cmd);
+ spmmc_wait_finish(host);
+ spmmc_check_error(host, mrq);
+ host->mrq = NULL;
+ spmmc_pr(VERBOSE, "request done > error:%d, cmd:%d, resp:%08x %08x %08x %08x\n",
+ cmd->error, cmd->opcode, cmd->resp[0], cmd->resp[1], cmd->resp[2],
+ cmd->resp[3]);
+ mutex_unlock(&host->mrq_lock);
+ mmc_request_done(host->mmc, mrq);
+ } else {
+ if (data)
+ spmmc_prepare_data(host, data);
+
+ if (unlikely(host->dmapio_mode == SPMMC_PIO_MODE && data)) {
+ u32 value;
+ /* pio data transfer do not use interrupt */
+ value = readl(&host->base->sd_int);
+ value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */
+ writel(value, &host->base->sd_int);
+ spmmc_trigger_transaction(host);
+ spmmc_xfer_data_pio(host, data);
+ spmmc_wait_finish(host);
+ spmmc_finish_request(host, mrq);
+ } else {
+ if (!(host->use_int || host->dma_use_int)) {
+ spmmc_trigger_transaction(host);
+ spmmc_wait_finish(host);
+ spmmc_finish_request(host, mrq);
+ } else {
+ spmmc_trigger_transaction(host);
+ }
+ }
+ }
+}
+
+static void spmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct spmmc_host *host = (struct spmmc_host *)mmc_priv(mmc);
+
+ mutex_lock(&host->mrq_lock);
+ spmmc_set_power_mode(host, ios);
+ spmmc_set_bus_clk(host, ios->clock);
+ spmmc_set_bus_timing(host, ios->timing);
+ spmmc_set_bus_width(host, ios->bus_width);
+ /* ensure mode is correct, because we might have hw reset the controller */
+ spmmc_select_mode(host, host->mode);
+ mutex_unlock(&host->mrq_lock);
+ //return;
+}
+
+/**
+ * Return values for the get_cd callback should be:
+ * 0 for a absent card
+ * 1 for a present card
+ * -ENOSYS when not supported (equal to NULL callback)
+ * or a negative errno value when something bad happened
+ */
+int spmmc_get_cd(struct mmc_host *mmc)
+{
+ int ret = 0;
+
+ if (mmc_can_gpio_cd(mmc))
+ ret = mmc_gpio_get_cd(mmc);
+ else
+ spmmc_pr(WARNING, "no gpio assigned for card detection\n");
+
+ if (ret < 0) {
+ spmmc_pr(ERROR, "Failed to get card presence status\n");
+ ret = 0;
+ }
+
+ return ret;
+}
+
+#ifdef SPMMC_SUPPORT_VOLTAGE_1V8
+static int spmmc_card_busy(struct mmc_host *mmc)
+{
+ struct spmmc_host *host = mmc_priv(mmc);
+
+ return !(readl(&host->base->sd_status) & SPMMC_SDSTATUS_DAT0_PIN_STATUS);
+}
+
+static int spmmc_start_signal_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct spmmc_host *host = mmc_priv(mmc);
+ u32 value;
+
+ if (host->signal_voltage == ios->signal_voltage)
+ return 0;
+
+ /* we do not support switch signal voltage for eMMC at runtime at present */
+ if (host->mode == SPMMC_MODE_EMMC)
+ return -EIO;
+
+ if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_180) {
+ spmmc_pr(WARNING, "can not switch voltage, only support 3.3v -> 1.8v switch!\n");
+ return -EIO;
+ }
+
+ value = readl(&host->base->sd_vol_ctrl);
+ value = bitfield_replace(value, 0, 2, 3); /* 1ms timeout for 400K */
+ value = bitfield_replace(value, 3, 1, 1);
+ writel(value, &host->base->sd_vol_ctrl);
+ spmmc_txdummy(host, 401);
+ mdelay(1);
+ /* mmc layer has guaranteed that CMD11 had issued to SD card at*/
+ /* this time, so we can just continue to check the status.*/
+ value = readl(&host->base->sd_vol_ctrl);
+ while (1) {
+ if (value >> 4 == SPMMC_SWITCH_VOLTAGE_1V8_ERROR)
+ return -EIO;
+ if (value >> 4 == SPMMC_SWITCH_VOLTAGE_1V8_TIMEOUT)
+ return -EIO;
+ if (value >> 4 == SPMMC_SWITCH_VOLTAGE_1V8_FINISH)
+ break;
+ }
+ value = bitfield_replace(value, 3, 1, 0);
+ writel(value, &host->base->sd_vol_ctrl);
+ host->signal_voltage = ios->signal_voltage;
+ return 0;
+}
+#endif /* ifdef SPMMC_SUPPORT_VOLTAGE_1V8 */
+
+static int spmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct spmmc_host *host = mmc_priv(mmc);
+ const u8 *blk_pattern;
+ u8 *blk_test;
+ int blksz;
+ u8 smpl_dly = 0, candidate_dly = 0;
+ u32 value;
+
+ if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
+ blk_pattern = tuning_blk_pattern_8bit;
+ blksz = sizeof(tuning_blk_pattern_8bit);
+ } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
+ blk_pattern = tuning_blk_pattern_4bit;
+ blksz = sizeof(tuning_blk_pattern_4bit);
+ } else {
+ return -EINVAL;
+ }
+
+ blk_test = kmalloc(blksz, GFP_KERNEL);
+ if (!blk_test)
+ return -ENOMEM;
+
+ host->tuning_info.enable_tuning = 0;
+ do {
+ struct mmc_request mrq = {NULL};
+ struct mmc_command cmd = {0};
+ struct mmc_command stop = {0};
+ struct mmc_data data = {0};
+ struct scatterlist sg;
+
+ cmd.opcode = opcode;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ stop.opcode = MMC_STOP_TRANSMISSION;
+ stop.arg = 0;
+ stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+
+ data.blksz = blksz;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, blk_test, blksz);
+ mrq.cmd = &cmd;
+ mrq.stop = &stop;
+ mrq.data = &data;
+ host->mrq = &mrq;
+
+ value = readl(&host->base->sd_timing_config0);
+ value = bitfield_replace(value, 12, 3, smpl_dly); /* sd_rd_rsp_dly_sel */
+ value = bitfield_replace(value, 16, 3, smpl_dly); /* sd_rd_dat_dly_sel */
+ value = bitfield_replace(value, 20, 3, smpl_dly); /* sd_rd_crc_dly_sel */
+ writel(value, &host->base->sd_timing_config0);
+
+ mmc_wait_for_req(mmc, &mrq);
+ if (!cmd.error && !data.error) {
+ if (!memcmp(blk_pattern, blk_test, blksz))
+ candidate_dly |= (1 << smpl_dly);
+ } else {
+ spmmc_pr(DEBUG, "Tuning error: cmd.error:%d, data.error:%d\n",
+ cmd.error, data.error);
+ }
+ } while (smpl_dly++ <= SPMMC_MAX_TUNABLE_DLY);
+ host->tuning_info.enable_tuning = 1;
+
+ spmmc_pr(DEBUG, "sampling delay candidates: %x\n", candidate_dly);
+ if (candidate_dly) {
+ smpl_dly = __find_best_delay(candidate_dly);
+ spmmc_pr(DEBUG, "set sampling delay to: %d\n", smpl_dly);
+ value = readl(&host->base->sd_timing_config0);
+ value = bitfield_replace(value, 12, 3, smpl_dly); /* sd_rd_rsp_dly_sel */
+ value = bitfield_replace(value, 16, 3, smpl_dly); /* sd_rd_dat_dly_sel */
+ value = bitfield_replace(value, 20, 3, smpl_dly); /* sd_rd_crc_dly_sel */
+ writel(value, &host->base->sd_timing_config0);
+ return 0;
+ }
+ return -EIO;
+}
+
+static void spmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct spmmc_host *host = mmc_priv(mmc);
+ u32 value = readl(&host->base->sd_int);
+
+ value = bitfield_replace(value, 5, 1, 1); /* sdio_int_clr */
+ if (enable)
+ value = bitfield_replace(value, 3, 1, 1);
+ else
+ value = bitfield_replace(value, 3, 1, 0);
+ writel(value, &host->base->sd_int);
+}
+
+static const struct mmc_host_ops spmmc_ops = {
+ .request = spmmc_request,
+ .set_ios = spmmc_set_ios,
+ .get_cd = spmmc_get_cd,
+#ifdef SPMMC_SUPPORT_VOLTAGE_1V8
+ .card_busy = spmmc_card_busy,
+ .start_signal_voltage_switch = spmmc_start_signal_voltage_switch,
+#endif
+ .execute_tuning = spmmc_execute_tuning,
+ .enable_sdio_irq = spmmc_enable_sdio_irq,
+};
+
+/****** sysfs files ******/
+struct spmmc_config {
+ char *name;
+#define SPMMC_CFG_SUCCESS 0
+#define SPMMC_CFG_FAIL -1
+#define SPMMC_CFG_REINIT 1 /* succeeded and need re-initialize */
+ int (*store)(struct spmmc_host *host, const char *arg);
+ int (*show)(struct spmmc_host *host, char *buf);
+};
+
+static int config_controller_clock_show(struct spmmc_host *host, char *buf)
+{
+ return sprintf(buf, "controller clock: %lu\n", clk_get_rate(host->clk));
+}
+
+static int config_bus_clock_show(struct spmmc_host *host, char *buf)
+{
+ return sprintf(buf, "*bus_clock: %d\n", host->mmc->ios.clock);
+}
+
+static int config_bus_clock_store(struct spmmc_host *host, const char *arg)
+{
+ unsigned long val;
+
+ if (kstrtoul(arg, 10, &val))
+ return SPMMC_CFG_FAIL;
+ if (val >= host->mmc->f_min && val <= SPMMC_MAX_CLK) {
+ host->mmc->f_max = val;
+ return SPMMC_CFG_REINIT;
+ }
+ return SPMMC_CFG_FAIL;
+}
+
+static int config_bus_width_show(struct spmmc_host *host, char *buf)
+{
+ int bus_width;
+
+ switch (host->mmc->ios.bus_width) {
+ case MMC_BUS_WIDTH_8:
+ bus_width = 8;
+ break;
+ case MMC_BUS_WIDTH_4:
+ bus_width = 4;
+ break;
+ default:
+ bus_width = 1;
+ break;
+ };
+ return sprintf(buf, "*bus_width: %d\n", bus_width);
+}
+
+static int config_bus_width_store(struct spmmc_host *host, const char *arg)
+{
+ unsigned long val;
+
+ if (kstrtoul(arg, 10, &val))
+ return SPMMC_CFG_FAIL;
+ switch (val) {
+ case 8:
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
+ return SPMMC_CFG_REINIT;
+ case 4:
+ host->mmc->caps &= ~MMC_CAP_8_BIT_DATA;
+ host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+ return SPMMC_CFG_REINIT;
+ case 1:
+ host->mmc->caps &= ~MMC_CAP_8_BIT_DATA;
+ host->mmc->caps &= ~MMC_CAP_4_BIT_DATA;
+ return SPMMC_CFG_REINIT;
+ default:
+ return SPMMC_CFG_FAIL;
+ }
+}
+
+static int config_mode_show(struct spmmc_host *host, char *buf)
+{
+ char *mode = "";
+
+ switch (host->mode) {
+ case SPMMC_MODE_SD:
+ mode = "SD";
+ break;
+ case SPMMC_MODE_SDIO:
+ mode = "SDIO";
+ break;
+ case SPMMC_MODE_EMMC:
+ mode = "eMMC";
+ break;
+ }
+ return sprintf(buf, "*mode: %s\n", mode);
+}
+
+static int config_mode_store(struct spmmc_host *host, const char *arg)
+{
+ if (!strcasecmp("sd", arg)) {
+ spmmc_select_mode(host, SPMMC_MODE_SD);
+ return SPMMC_CFG_REINIT;
+ }
+ if (!strcasecmp("sdio", arg)) {
+ spmmc_select_mode(host, SPMMC_MODE_SDIO);
+ return SPMMC_CFG_REINIT;
+ }
+ if (!strcasecmp("emmc", arg)) {
+ spmmc_select_mode(host, SPMMC_MODE_EMMC);
+ return SPMMC_CFG_REINIT;
+ }
+ return SPMMC_CFG_FAIL;
+}
+
+static int config_dmapio_mode_show(struct spmmc_host *host, char *buf)
+{
+ char *dmapio_mode = "";
+
+ switch (host->dmapio_mode) {
+ case SPMMC_DMA_MODE:
+ dmapio_mode = "DMA";
+ break;
+ case SPMMC_PIO_MODE:
+ dmapio_mode = "PIO";
+ break;
+ }
+ return sprintf(buf, "*dmapio_mode: %s\n", dmapio_mode);
+}
+
+static int config_dmapio_mode_store(struct spmmc_host *host, const char *arg)
+{
+ if (!strcasecmp("dma", arg)) {
+ host->dmapio_mode = SPMMC_DMA_MODE;
+ return SPMMC_CFG_SUCCESS;
+ }
+ if (!strcasecmp("pio", arg)) {
+ host->dmapio_mode = SPMMC_PIO_MODE;
+ return SPMMC_CFG_SUCCESS;
+ }
+ return SPMMC_CFG_FAIL;
+}
+
+static int config_dma_int_threshold_show(struct spmmc_host *host, char *buf)
+{
+ return sprintf(buf, "*dma_int_threshold: %d\n", host->dma_int_threshold);
+}
+
+static int config_dma_int_threshold_store(struct spmmc_host *host, const char *arg)
+{
+ unsigned long val;
+
+ if (kstrtoul(arg, 10, &val))
+ return SPMMC_CFG_FAIL;
+ host->dma_int_threshold = val;
+ return SPMMC_CFG_SUCCESS;
+}
+
+static struct spmmc_config spmmc_configs[] = {
+ {
+ .name = "controller clock",
+ .show = config_controller_clock_show,
+ },
+ {
+ .name = "mode",
+ .show = config_mode_show,
+ .store = config_mode_store
+ },
+ {
+ .name = "bus_clock",
+ .show = config_bus_clock_show,
+ .store = config_bus_clock_store
+ },
+ {
+ .name = "bus_width",
+ .show = config_bus_width_show,
+ .store = config_bus_width_store
+ },
+ {
+ .name = "dmapio_mode",
+ .show = config_dmapio_mode_show,
+ .store = config_dmapio_mode_store
+ },
+ {
+ .name = "dma_int_threshold",
+ .show = config_dma_int_threshold_show,
+ .store = config_dma_int_threshold_store
+ },
+ {} /* sentinel */
+};
+
+static ssize_t config_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct spmmc_host *host = dev_get_drvdata(dev);
+ struct spmmc_config *p = spmmc_configs;
+ int len;
+
+ if (!host) {
+ pr_err("No host data!\n");
+ return 0;
+ }
+
+ len = sprintf(buf, "configures start with '*' could be configured:\n");
+ while (p->name) {
+ if (p->show)
+ len += p->show(host, buf + len);
+ p++;
+ }
+ return len;
+
+}
+
+static ssize_t config_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct spmmc_host *host = dev_get_drvdata(dev);
+ char *tmp;
+ char *name, *arg, **s;
+ int ret;
+ int need_reinit = 0;
+ struct spmmc_config *p;
+
+ if (!host) {
+ pr_err("No host data!\n");
+ return 0;
+ }
+ tmp = kmalloc(count, GFP_KERNEL);
+ if (!tmp) {
+ //pr_err("No enough memory for operation!\n");
+ return 0;
+ }
+ memcpy(tmp, buf, count);
+ s = &tmp;
+ while ((name = strsep(s, "\n")) && (arg = strsep(s, "\n"))) {
+ p = spmmc_configs;
+ while (p->name && strcasecmp(p->name, name))
+ p++;
+ if (p->name) {
+ spmmc_pr(INFO, "trying to set config %s to %s\n", name, arg);
+ ret = p->store(host, arg);
+ if (ret == SPMMC_CFG_REINIT)
+ need_reinit = 1;
+ else if (ret == SPMMC_CFG_FAIL)
+ pr_err("Invalid argument '%s' to config %s\n", arg, name);
+ } else {
+ pr_err("Invalid config name: %s\n", name);
+ }
+ }
+
+ if (need_reinit) {
+ mmc_remove_host(host->mmc);
+ mmc_add_host(host->mmc);
+ }
+ kfree(tmp);
+ return count;
+}
+static DEVICE_ATTR_RW(config);
+
+static ssize_t loglevel_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", loglevel);
+}
+
+static ssize_t loglevel_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val))
+ goto out;
+ if (val < SPMMC_LOG_MAX) {
+ loglevel = val;
+ return count;
+ }
+out:
+ pr_err("Invalid value\n");
+ return 0;
+}
+static DEVICE_ATTR_RW(loglevel);
+
+static int spmmc_device_create_sysfs(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = device_create_file(&pdev->dev, &dev_attr_loglevel);
+ if (ret)
+ return ret;
+ ret = device_create_file(&pdev->dev, &dev_attr_config);
+ if (ret)
+ device_remove_file(&pdev->dev, &dev_attr_loglevel);
+ return ret;
+}
+
+static void spmmc_device_remove_sysfs(struct platform_device *pdev)
+{
+ device_remove_file(&pdev->dev, &dev_attr_config);
+ device_remove_file(&pdev->dev, &dev_attr_loglevel);
+}
+
+static void tsklet_func_finish_req(unsigned long data)
+{
+ struct spmmc_host *host = (struct spmmc_host *)data;
+
+ spin_lock(&host->lock);
+ spmmc_finish_request(host, host->mrq);
+ spin_unlock(&host->lock);
+}
+
+static int spmmc_drv_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct mmc_host *mmc;
+ struct resource *resource;
+ struct spmmc_host *host;
+ unsigned int mode;
+
+ ret = spmmc_device_create_sysfs(pdev);
+ if (ret) {
+ return -ENODEV;
+ goto probe_free_host;
+ }
+
+ mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto probe_free_host;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->power_state = MMC_POWER_OFF;
+ host->dma_int_threshold = 1024;
+ host->dmapio_mode = SPMMC_DMA_MODE;
+
+ host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ spmmc_pr(ERROR, "Can not find clock source\n");
+ ret = PTR_ERR(host->clk);
+ goto probe_free_host;
+ }
+
+ host->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(host->rstc)) {
+ spmmc_pr(ERROR, "Can not find reset controller\n");
+ ret = PTR_ERR(host->rstc);
+ goto probe_free_host;
+ }
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(resource)) {
+ spmmc_pr(ERROR, "get sd register resource fail\n");
+ ret = PTR_ERR(resource);
+ goto probe_free_host;
+ }
+
+ if ((resource->end - resource->start + 1) < sizeof(*host->base)) {
+ spmmc_pr(ERROR, "register size is not right\n");
+ ret = -EINVAL;
+ goto probe_free_host;
+ }
+
+ host->base = devm_ioremap_resource(&pdev->dev, resource);
+ if (IS_ERR((void *)host->base)) {
+ spmmc_pr(ERROR, "devm_ioremap_resource fail\n");
+ ret = PTR_ERR((void *)host->base);
+ goto probe_free_host;
+ }
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq <= 0) {
+ spmmc_pr(ERROR, "get sd irq resource fail\n");
+ ret = -EINVAL;
+ goto probe_free_host;
+ }
+ if (devm_request_irq(&pdev->dev, host->irq, spmmc_irq, IRQF_SHARED,
+ dev_name(&pdev->dev), host)) {
+ spmmc_pr(ERROR, "Failed to request sd card interrupt.\n");
+ ret = -ENOENT;
+ goto probe_free_host;
+ }
+ spmmc_pr(INFO, "spsdc driver probe, reg base:0x%p, irq:%d\n", host->base, host->irq);
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto probe_free_host;
+
+ ret = clk_prepare(host->clk);
+ if (ret)
+ goto probe_free_host;
+ ret = clk_enable(host->clk);
+ if (ret)
+ goto probe_clk_unprepare;
+
+ spin_lock_init(&host->lock);
+ mutex_init(&host->mrq_lock);
+ tasklet_init(&host->tsklet_finish_req, tsklet_func_finish_req, (unsigned long)host);
+ mmc->ops = &spmmc_ops;
+ mmc->f_min = SPMMC_MIN_CLK;
+ if (mmc->f_max > SPMMC_MAX_CLK) {
+ spmmc_pr(DEBUG, "max-frequency is too high, set it to %d\n", SPMMC_MAX_CLK);
+ mmc->f_max = SPMMC_MAX_CLK;
+ }
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->max_seg_size = SPMMC_MAX_BLK_COUNT * 512;
+ /* Host controller supports up to "SPMMC_MAX_DMA_MEMORY_SECTORS"*/
+ /* a.k.a. max scattered memory segments per request*/
+ mmc->max_segs = SPMMC_MAX_DMA_MEMORY_SECTORS;
+ mmc->max_req_size = SPMMC_MAX_BLK_COUNT * 512;
+ /* Limited by the max value of dma_size & data_length, set it to 512 bytes for now */
+ mmc->max_blk_size = 512;
+ mmc->max_blk_count = SPMMC_MAX_BLK_COUNT; /* Limited by sd_page_num */
+
+ dev_set_drvdata(&pdev->dev, host);
+ spmmc_controller_init(host);
+ mode = (int)of_device_get_match_data(&pdev->dev);
+ spmmc_select_mode(host, mode);
+ mmc_add_host(mmc);
+ host->tuning_info.enable_tuning = 1;
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+probe_clk_unprepare:
+ spmmc_pr(ERROR, "unable to enable controller clock\n");
+ clk_unprepare(host->clk);
+probe_free_host:
+ spmmc_device_remove_sysfs(pdev);
+ if (mmc)
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static int spmmc_drv_remove(struct platform_device *dev)
+{
+ struct spmmc_host *host = platform_get_drvdata(dev);
+
+ mmc_remove_host(host->mmc);
+ clk_disable(host->clk);
+ clk_unprepare(host->clk);
+ pm_runtime_disable(&dev->dev);
+ platform_set_drvdata(dev, NULL);
+ mmc_free_host(host->mmc);
+ spmmc_device_remove_sysfs(dev);
+
+ return 0;
+}
+
+
+static int spmmc_drv_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct spmmc_host *host;
+
+ host = platform_get_drvdata(dev);
+ mutex_lock(&host->mrq_lock); /* Make sure that no one is holding the controller */
+ mutex_unlock(&host->mrq_lock);
+ clk_disable(host->clk);
+ return 0;
+}
+
+static int spmmc_drv_resume(struct platform_device *dev)
+{
+ struct spmmc_host *host;
+
+ host = platform_get_drvdata(dev);
+ return clk_enable(host->clk);
+}
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int spmmc_pm_suspend(struct device *dev)
+{
+ pm_runtime_force_suspend(dev);
+ return 0;
+}
+
+static int spmmc_pm_resume(struct device *dev)
+{
+ pm_runtime_force_resume(dev);
+ return 0;
+}
+#endif /* ifdef CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_RUNTIME
+static int spmmc_pm_runtime_suspend(struct device *dev)
+{
+ struct spmmc_host *host;
+
+ host = dev_get_drvdata(dev);
+ clk_disable(host->clk);
+ return 0;
+}
+
+static int spmmc_pm_runtime_resume(struct device *dev)
+{
+ struct spmmc_host *host;
+
+ host = dev_get_drvdata(dev);
+ return clk_enable(host->clk);
+}
+#endif /* ifdef CONFIG_PM_RUNTIME */
+
+static const struct dev_pm_ops spmmc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(spmmc_pm_suspend, spmmc_pm_resume)
+#ifdef CONFIG_PM_RUNTIME
+ SET_RUNTIME_PM_OPS(spmmc_pm_runtime_suspend, spmmc_pm_runtime_resume, NULL)
+#endif
+};
+#endif /* ifdef CONFIG_PM */
+
+static const struct of_device_id spmmc_of_table[] = {
+ {
+ .compatible = "sunplus,sp7021-emmc",
+ .data = (void *)SPMMC_MODE_EMMC,
+ },
+ {
+ .compatible = "sunplus,i143-emmc",
+ .data = (void *)SPMMC_MODE_EMMC,
+ },
+ {
+ .compatible = "sunplus,q645-emmc",
+ .data = (void *)SPMMC_MODE_EMMC,
+ },
+ {/* sentinel */}
+
+};
+MODULE_DEVICE_TABLE(of, spmmc_of_table);
+
+static struct platform_driver spmmc_driver = {
+ .probe = spmmc_drv_probe,
+ .remove = spmmc_drv_remove,
+ .suspend = spmmc_drv_suspend,
+ .resume = spmmc_drv_resume,
+ .driver = {
+ .name = "spmmc",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &spmmc_pm_ops,
+#endif
+ .of_match_table = spmmc_of_table,
+ },
+};
+module_platform_driver(spmmc_driver);
+
+MODULE_AUTHOR("Tony Huang <tony.huang@...plus.com>");
+MODULE_DESCRIPTION("Sunplus MMC controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sunplus_mmc.h b/drivers/mmc/host/sunplus_mmc.h
new file mode 100644
index 0000000..d827679
--- /dev/null
+++ b/drivers/mmc/host/sunplus_mmc.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/**
+ * (C) Copyright 2019 Sunplus Technology. <http://www.sunplus.com/>
+ *
+ * Sunplus SD host controller v3.0
+ */
+#ifndef __SPMMC_H__
+#define __SPMMC_H__
+
+#include <linux/types.h>
+#include <linux/spinlock_types.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+
+/* #define SPMMC_SUPPORT_VOLTAGE_1V8 */
+/* #define SPMMC_EMMC_VCCQ_1V8 */
+#define SPMMC_MIN_CLK 400000
+#define SPMMC_MAX_CLK 52000000
+#define SPMMC_MAX_BLK_COUNT 65536
+#define SPMMC_MAX_TUNABLE_DLY 7
+#ifdef CONFIG_SOC_I143
+#define SPMMC_SYS_CLK 270000000
+#endif
+#ifdef CONFIG_SOC_Q645
+#define SPMMC_SYS_CLK 360000000
+#endif
+#define __rsvd_regs(l) __append_suffix(l, __COUNTER__)
+#define __append_suffix(l, s) _append_suffix(l, s)
+#define _append_suffix(l, s) (reserved##s[l])
+
+struct spmmc_regs {
+#define SPMMC_MEDIA_NONE 0
+#define SPMMC_MEDIA_SD 6
+#define SPMMC_MEDIA_MS 7
+ u32 card_mediatype_srcdst;
+ u32 card_cpu_page_cnt;
+ u32 sdram_sector_0_size;
+ u32 dma_base_addr;
+ u32 hw_dma_ctrl;
+ u32 card_gclk_disable;
+#define SPMMC_MAX_DMA_MEMORY_SECTORS 8 /* support up to 8 fragmented memory blocks */
+ u32 sdram_sector_1_addr;
+ u32 sdram_sector_1_size;
+ u32 sdram_sector_2_addr;
+ u32 sdram_sector_2_size;
+ u32 sdram_sector_3_addr;
+ u32 sdram_sector_3_size;
+ u32 sdram_sector_4_addr;
+ u32 sdram_sector_4_size;
+ u32 sdram_sector_5_addr;
+ u32 sdram_sector_5_size;
+ u32 sdram_sector_6_addr;
+ u32 sdram_sector_6_size;
+ u32 sdram_sector_7_addr;
+ u32 sdram_sector_7_size;
+ u32 sdram_sector_cnt;
+ u32 dma_hw_page_addr0;
+ u32 dma_hw_page_addr1;
+ u32 dma_hw_page_addr2;
+ u32 dma_hw_page_addr3;
+ u32 dma_hw_page_num0;
+ u32 dma_hw_page_num1;
+ u32 dma_hw_page_num2;
+ u32 dma_hw_page_num3;
+ u32 dma_hw_wait_num;
+ u32 dma_hw_delay_num;
+ u32 dma_debug;
+
+ u32 boot_ctrl;
+#define SPMMC_SWITCH_VOLTAGE_1V8_FINISH 1
+#define SPMMC_SWITCH_VOLTAGE_1V8_ERROR 2
+#define SPMMC_SWITCH_VOLTAGE_1V8_TIMEOUT 3
+ u32 sd_vol_ctrl;
+#define SPMMC_SDINT_SDCMPEN BIT(0)
+#define SPMMC_SDINT_SDCMP BIT(1)
+#define SPMMC_SDINT_SDIOEN BIT(3)
+#define SPMMC_SDINT_SDIO BIT(4)
+ u32 sd_int;
+ u32 sd_page_num;
+#define SPMMC_MODE_SDIO 2
+#define SPMMC_MODE_EMMC 1
+#define SPMMC_MODE_SD 0
+ u32 sd_config0;
+ u32 sdio_ctrl;
+ u32 sd_rst;
+ u32 sd_ctrl;
+#define SPMMC_SDSTATUS_DUMMY_READY BIT(0)
+#define SPMMC_SDSTATUS_RSP_BUF_FULL BIT(1)
+#define SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY BIT(2)
+#define SPMMC_SDSTATUS_RX_DATA_BUF_FULL BIT(3)
+#define SPMMC_SDSTATUS_CMD_PIN_STATUS BIT(4)
+#define SPMMC_SDSTATUS_DAT0_PIN_STATUS BIT(5)
+#define SPMMC_SDSTATUS_RSP_TIMEOUT BIT(6)
+#define SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT BIT(7)
+#define SPMMC_SDSTATUS_STB_TIMEOUT BIT(8)
+#define SPMMC_SDSTATUS_RSP_CRC7_ERROR BIT(9)
+#define SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR BIT(10)
+#define SPMMC_SDSTATUS_RDATA_CRC16_ERROR BIT(11)
+#define SPMMC_SDSTATUS_SUSPEND_STATE_READY BIT(12)
+#define SPMMC_SDSTATUS_BUSY_CYCLE BIT(13)
+#define SPMMC_SDSTATUS_DAT1_PIN_STATUS BIT(14)
+#define SPMMC_SDSTATUS_SD_SENSE_STATUS BIT(15)
+#define SPMMC_SDSTATUS_BOOT_ACK_TIMEOUT BIT(16)
+#define SPMMC_SDSTATUS_BOOT_DATA_TIMEOUT BIT(17)
+#define SPMMC_SDSTATUS_BOOT_ACK_ERROR BIT(18)
+ u32 sd_status;
+#define SPMMC_SDSTATE_IDLE (0x0)
+#define SPMMC_SDSTATE_TXDUMMY (0x1)
+#define SPMMC_SDSTATE_TXCMD (0x2)
+#define SPMMC_SDSTATE_RXRSP (0x3)
+#define SPMMC_SDSTATE_TXDATA (0x4)
+#define SPMMC_SDSTATE_RXCRC (0x5)
+#define SPMMC_SDSTATE_RXDATA (0x6)
+#define SPMMC_SDSTATE_MASK (0x7)
+#define SPMMC_SDSTATE_BADCRC (0x5)
+#define SPMMC_SDSTATE_ERROR BIT(13)
+#define SPMMC_SDSTATE_FINISH BIT(14)
+ u32 sd_state;
+ u32 sd_hw_state;
+ u32 sd_blocksize;
+ u32 sd_config1;
+ u32 sd_timing_config0;
+ u32 sd_rx_data_tmr;
+ u32 sd_piodatatx;
+ u32 sd_piodatarx;
+ u32 sd_cmdbuf0_3;
+ u32 sd_cmdbuf4;
+ u32 sd_rspbuf0_3;
+ u32 sd_rspbuf4_5;
+
+ u32 __rsvd_regs(32);
+};
+
+struct spmmc_tuning_info {
+ int enable_tuning;
+ int need_tuning;
+#define SPMMC_MAX_RETRIES (8 * 8)
+ int retried; /* how many times has been retried */
+ u32 rd_crc_dly:3;
+ u32 rd_dat_dly:3;
+ u32 rd_rsp_dly:3;
+ u32 wr_cmd_dly:3;
+ u32 wr_dat_dly:3;
+ u32 clk_dly:3;
+};
+
+struct spmmc_host {
+ struct spmmc_regs *base;
+ struct clk *clk;
+ struct reset_control *rstc;
+ int mode; /* SD/SDIO/eMMC */
+ spinlock_t lock; /* controller lock */
+ struct mutex mrq_lock;
+ /* tasklet used to handle error then finish the request */
+ struct tasklet_struct tsklet_finish_req;
+ struct mmc_host *mmc;
+ struct mmc_request *mrq; /* current mrq */
+
+ int irq;
+ int use_int; /* should raise irq when done? */
+ int power_state; /* current power state: off/up/on */
+ int ddr_enabled;
+ int signal_voltage;
+
+#define SPMMC_DMA_MODE 0
+#define SPMMC_PIO_MODE 1
+ int dmapio_mode;
+ /* for purpose of reducing context switch, only when transfer data that*/
+ /* length is greater than `dma_int_threshold' should use interrupt */
+ int dma_int_threshold;
+ struct sg_mapping_iter sg_miter; /* for pio mode to access sglist */
+ int dma_use_int; /* should raise irq when dma done */
+ struct spmmc_tuning_info tuning_info;
+};
+
+#endif /* #ifndef __SPMMC_H__ */
--
2.7.4
Powered by blists - more mailing lists