lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <434349d3-4dcb-9157-35a5-9f05aaed4982@redhat.com>
Date:   Tue, 9 Nov 2021 16:50:05 +0100
From:   Eric Auger <eauger@...hat.com>
To:     Gavin Shan <gshan@...hat.com>, kvmarm@...ts.cs.columbia.edu
Cc:     maz@...nel.org, linux-kernel@...r.kernel.org,
        Jonathan.Cameron@...wei.com, pbonzini@...hat.com, will@...nel.org
Subject: Re: [PATCH v4 04/21] KVM: arm64: Support SDEI_EVENT_REGISTER
 hypercall

Hi Gavin,
On 8/15/21 2:13 AM, Gavin Shan wrote:
> This supports SDEI_EVENT_REGISTER hypercall, which is used by guest
> to register SDEI events. The SDEI event won't be raised to the guest
> or specific vCPU until it's registered and enabled explicitly.
> 
> Only those events that have been exported by KVM can be registered.
> After the event is registered successfully, the KVM SDEI event (object)
> is created or updated because the same KVM SDEI event is shared by
revisit the terminology (KVM SDEI event). The same SDEI registered event
object is shared by multiple vCPUs if it is a private event.
> multiple vCPUs if it's a private event.>
> Signed-off-by: Gavin Shan <gshan@...hat.com>
> ---
>  arch/arm64/kvm/sdei.c | 122 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 122 insertions(+)
> 
> diff --git a/arch/arm64/kvm/sdei.c b/arch/arm64/kvm/sdei.c
> index aa9485f076a9..d3ea3eee154b 100644
> --- a/arch/arm64/kvm/sdei.c
> +++ b/arch/arm64/kvm/sdei.c
> @@ -21,6 +21,20 @@ static struct kvm_sdei_event_state defined_kse[] = {
>  	},
>  };
>  
> +static struct kvm_sdei_event *kvm_sdei_find_event(struct kvm *kvm,
> +						  unsigned long num)
> +{
> +	struct kvm_sdei_kvm *ksdei = kvm->arch.sdei;
> +	struct kvm_sdei_event *kse;
the 'k' prefix everywhere for your local variable is unneeded.
> +
> +	list_for_each_entry(kse, &ksdei->events, link) {
> +		if (kse->state.num == num)
> +			return kse;
> +	}
> +
> +	return NULL;
> +}
> +
>  static void kvm_sdei_remove_events(struct kvm *kvm)
>  {
>  	struct kvm_sdei_kvm *ksdei = kvm->arch.sdei;
> @@ -32,6 +46,20 @@ static void kvm_sdei_remove_events(struct kvm *kvm)
>  	}
>  }
>  
> +static struct kvm_sdei_kvm_event *kvm_sdei_find_kvm_event(struct kvm *kvm,
> +							  unsigned long num)
> +{
> +	struct kvm_sdei_kvm *ksdei = kvm->arch.sdei;
> +	struct kvm_sdei_kvm_event *kske;
> +
> +	list_for_each_entry(kske, &ksdei->kvm_events, link) {> +		if (kske->state.num == num)
I still don't get the diff between the num of an SDEI event vs the num
of a so-called SDEI kvm event. Event numbers are either static or
dynamically created using bind ops which you do not support. But to me
this is a property of the root exposed SDEI event and not a property of
the registered event. Please could you clarify?
> +			return kske;
> +	}
> +
> +	return NULL;
> +}
> +
>  static void kvm_sdei_remove_kvm_events(struct kvm *kvm,
>  				       unsigned int mask,
>  				       bool force)
> @@ -86,6 +114,98 @@ static unsigned long kvm_sdei_hypercall_version(struct kvm_vcpu *vcpu)
>  	return ret;
>  }
>  
> +static unsigned long kvm_sdei_hypercall_register(struct kvm_vcpu *vcpu)
> +{
> +	struct kvm *kvm = vcpu->kvm;
> +	struct kvm_sdei_kvm *ksdei = kvm->arch.sdei;
> +	struct kvm_sdei_vcpu *vsdei = vcpu->arch.sdei;
> +	struct kvm_sdei_event *kse = NULL;
> +	struct kvm_sdei_kvm_event *kske = NULL;
> +	unsigned long event_num = smccc_get_arg1(vcpu);
> +	unsigned long event_entry = smccc_get_arg2(vcpu);
> +	unsigned long event_param = smccc_get_arg3(vcpu);
> +	unsigned long route_mode = smccc_get_arg4(vcpu);
> +	unsigned long route_affinity = smccc_get_arg5(vcpu);
> +	int index = vcpu->vcpu_idx;
> +	unsigned long ret = SDEI_SUCCESS;
> +
> +	/* Sanity check */
> +	if (!(ksdei && vsdei)) {
> +		ret = SDEI_NOT_SUPPORTED;
> +		goto out;
> +	}
> +
> +	if (!kvm_sdei_is_valid_event_num(event_num)) {
> +		ret = SDEI_INVALID_PARAMETERS;
> +		goto out;
> +	}
> +
> +	if (!(route_mode == SDEI_EVENT_REGISTER_RM_ANY ||
> +	      route_mode == SDEI_EVENT_REGISTER_RM_PE)) {
> +		ret = SDEI_INVALID_PARAMETERS;
> +		goto out;
> +	}
> +
> +	/*
> +	 * The KVM event could have been created if it's a private event.
> +	 * We needn't create a KVM event in this case.
s/create a KVM event/to create another KVM event instance
> +	 */
> +	spin_lock(&ksdei->lock);
> +	kske = kvm_sdei_find_kvm_event(kvm, event_num);
> +	if (kske) {
> +		kse = kske->kse;
> +		index = (kse->state.type == SDEI_EVENT_TYPE_PRIVATE) ?
> +			vcpu->vcpu_idx : 0;
> +
> +		if (kvm_sdei_is_registered(kske, index)) {
> +			ret = SDEI_DENIED;
> +			goto unlock;
> +		}
> +
> +		kske->state.route_mode     = route_mode;
> +		kske->state.route_affinity = route_affinity;
> +		kske->state.entries[index] = event_entry;
> +		kske->state.params[index]  = event_param;
> +		kvm_sdei_set_registered(kske, index);
> +		goto unlock;
> +	}
> +
> +	/* Check if the event number has been registered */
> +	kse = kvm_sdei_find_event(kvm, event_num);
I don't get the comment. find_event looks up for exposed events and not
registered events, right? So maybe this is the first thing to check, ie.
the num matches one exposed event.
> +	if (!kse) {
> +		ret = SDEI_INVALID_PARAMETERS;
> +		goto unlock;
> +	}
> +
> +	/* Create KVM event */
> +	kske = kzalloc(sizeof(*kske), GFP_KERNEL);
> +	if (!kske) {
> +		ret = SDEI_OUT_OF_RESOURCE;
> +		goto unlock;
> +	}
> +
> +	/* Initialize KVM event state */
> +	index = (kse->state.type == SDEI_EVENT_TYPE_PRIVATE) ?
> +		vcpu->vcpu_idx : 0;
> +	kske->state.num            = event_num;
> +	kske->state.refcount       = 0;
> +	kske->state.route_mode     = route_affinity;
> +	kske->state.route_affinity = route_affinity;
> +	kske->state.entries[index] = event_entry;
> +	kske->state.params[index] = event_param;
> +	kvm_sdei_set_registered(kske, index);
> +
> +	/* Initialize KVM event */
> +	kske->kse = kse;
> +	kske->kvm = kvm;
> +	list_add_tail(&kske->link, &ksdei->kvm_events);
> +
> +unlock:
> +	spin_unlock(&ksdei->lock);
> +out:
> +	return ret;
> +}
> +
>  int kvm_sdei_hypercall(struct kvm_vcpu *vcpu)
>  {
>  	u32 func = smccc_get_function(vcpu);
> @@ -97,6 +217,8 @@ int kvm_sdei_hypercall(struct kvm_vcpu *vcpu)
>  		ret = kvm_sdei_hypercall_version(vcpu);
>  		break;
>  	case SDEI_1_0_FN_SDEI_EVENT_REGISTER:
> +		ret = kvm_sdei_hypercall_register(vcpu);
> +		break;
>  	case SDEI_1_0_FN_SDEI_EVENT_ENABLE:
>  	case SDEI_1_0_FN_SDEI_EVENT_DISABLE:
>  	case SDEI_1_0_FN_SDEI_EVENT_CONTEXT:
> 
Thanks

Eric

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ