linux-kernel - [PATCH] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20211109192547.28679-1-ulf.hansson@linaro.org>
Date:   Tue,  9 Nov 2021 20:25:47 +0100
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     linux-mmc@...r.kernel.org, Ulf Hansson <ulf.hansson@...aro.org>
Cc:     "H . Nikolaus Schaller" <hns@...delico.com>,
        Jerome Pouiller <jerome.pouiller@...abs.com>,
        Tony Lindgren <tony@...mide.com>, linux-kernel@...r.kernel.org
Subject: [PATCH] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.

In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.

To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.

Reported-by: H. Nikolaus Schaller <hns@...delico.com>
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
---
 drivers/mmc/core/sdio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 68edf7a615be..5447c47157aa 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -708,6 +708,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	if (host->ops->init_card)
 		host->ops->init_card(host, card);

+	card->ocr = ocr_card;
+
 	/*
 	 * If the host and card support UHS-I mode request the card
 	 * to switch to 1.8V signaling level.  No 1.8v signalling if
@@ -820,7 +822,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 			goto mismatch;
 		}
 	}
-	card->ocr = ocr_card;
+
 	mmc_fixup_device(card, sdio_fixup_methods);

 	if (card->type == MMC_TYPE_SD_COMBO) {
-- 
2.25.1