| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YYpN3LzXz638l6FG@smile.fi.intel.com>
Date: Tue, 9 Nov 2021 12:30:52 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Arnd Bergmann <arnd@...nel.org>
Cc: linux-gpio@...r.kernel.org, Arnd Bergmann <arnd@...db.de>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Geert Uytterhoeven <geert+renesas@...der.be>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 6/8] gpiolib: remove legacy gpio_export
On Tue, Nov 09, 2021 at 11:02:05AM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@...db.de>
>
> There are only a handful of users of gpio_export() and
> related functions.
>
> As these are just wrappers around the modern gpiod_export()
> helper, remove the wrappers and open-code the gpio_to_desc
> in all callers to shrink the legacy API.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
What I wish to see meanwhile is a section in the TODO list somewhere to clean
up those modules that have gpio.h. Linus, do we have one in the kernel or is
it your personal TODO?
In case we have one in the kernel, please add there modules you modified in
a way that they still need further attention.
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> ---
> Documentation/admin-guide/gpio/sysfs.rst | 2 +-
> Documentation/driver-api/gpio/legacy.rst | 30 -----------------
> Documentation/translations/zh_CN/gpio.txt | 26 --------------
> Documentation/translations/zh_TW/gpio.txt | 27 ---------------
> arch/arm/mach-davinci/board-dm646x-evm.c | 28 +++++++++-------
> arch/arm/mach-omap2/pdata-quirks.c | 9 ++---
> arch/sh/boards/mach-ap325rxa/setup.c | 7 ++--
> drivers/gpio/gpiolib-sysfs.c | 4 +--
> drivers/media/i2c/noon010pc30.c | 5 +--
> drivers/media/i2c/ov9650.c | 4 +--
> drivers/media/i2c/s5k4ecgx.c | 3 +-
> drivers/media/pci/sta2x11/sta2x11_vip.c | 10 ++++--
> drivers/mfd/dm355evm_msp.c | 3 +-
> drivers/net/ieee802154/ca8210.c | 3 +-
> include/linux/gpio.h | 41 -----------------------
> 15 files changed, 45 insertions(+), 157 deletions(-)
>
> diff --git a/Documentation/admin-guide/gpio/sysfs.rst b/Documentation/admin-guide/gpio/sysfs.rst
> index ec09ffd983e7..35171d15f78d 100644
> --- a/Documentation/admin-guide/gpio/sysfs.rst
> +++ b/Documentation/admin-guide/gpio/sysfs.rst
> @@ -145,7 +145,7 @@ requested using gpio_request()::
> /* export the GPIO to userspace */
> int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
>
> - /* reverse gpio_export() */
> + /* reverse gpiod_export() */
> void gpiod_unexport(struct gpio_desc *desc);
>
> /* create a sysfs link to an exported GPIO node */
> diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
> index eae185f771d7..34fcb14814db 100644
> --- a/Documentation/driver-api/gpio/legacy.rst
> +++ b/Documentation/driver-api/gpio/legacy.rst
> @@ -717,36 +717,6 @@ gpiochip nodes (possibly in conjunction with schematics) to determine
> the correct GPIO number to use for a given signal.
>
>
> -Exporting from Kernel code
> ---------------------------
> -Kernel code can explicitly manage exports of GPIOs which have already been
> -requested using gpio_request()::
> -
> - /* export the GPIO to userspace */
> - int gpio_export(unsigned gpio, bool direction_may_change);
> -
> - /* reverse gpio_export() */
> - void gpio_unexport();
> -
> - /* create a sysfs link to an exported GPIO node */
> - int gpio_export_link(struct device *dev, const char *name,
> - unsigned gpio)
> -
> -After a kernel driver requests a GPIO, it may only be made available in
> -the sysfs interface by gpio_export(). The driver can control whether the
> -signal direction may change. This helps drivers prevent userspace code
> -from accidentally clobbering important system state.
> -
> -This explicit exporting can help with debugging (by making some kinds
> -of experiments easier), or can provide an always-there interface that's
> -suitable for documenting as part of a board support package.
> -
> -After the GPIO has been exported, gpio_export_link() allows creating
> -symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
> -use this to provide the interface under their own device in sysfs with
> -a descriptive name.
> -
> -
> API Reference
> =============
>
> diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/gpio.txt
> index a23ee14fc927..e49fa88a2804 100644
> --- a/Documentation/translations/zh_CN/gpio.txt
> +++ b/Documentation/translations/zh_CN/gpio.txt
> @@ -622,29 +622,3 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO
> 固定的,例如在扩展卡上的 GPIO会根据所使用的主板或所在堆叠架构中其他的板子而
> 有所不同。在这种情况下,你可能需要使用 gpiochip 节点(尽可能地结合电路图)来
> 确定给定信号所用的 GPIO 编号。
> -
> -
> -从内核代码中导出
> --------------
> -内核代码可以明确地管理那些已通过 gpio_request()申请的 GPIO 的导出:
> -
> - /* 导出 GPIO 到用户空间 */
> - int gpio_export(unsigned gpio, bool direction_may_change);
> -
> - /* gpio_export()的逆操作 */
> - void gpio_unexport();
> -
> - /* 创建一个 sysfs 连接到已导出的 GPIO 节点 */
> - int gpio_export_link(struct device *dev, const char *name,
> - unsigned gpio)
> -
> -在一个内核驱动申请一个 GPIO 之后，它可以通过 gpio_export()使其在 sysfs
> -接口中可见。该驱动可以控制信号方向是否可修改。这有助于防止用户空间代码无意间
> -破坏重要的系统状态。
> -
> -这个明确的导出有助于(通过使某些实验更容易来)调试，也可以提供一个始终存在的接口，
> -与文档配合作为板级支持包的一部分。
> -
> -在 GPIO 被导出之后，gpio_export_link()允许在 sysfs 文件系统的任何地方
> -创建一个到这个 GPIO sysfs 节点的符号链接。这样驱动就可以通过一个描述性的
> -名字，在 sysfs 中他们所拥有的设备下提供一个(到这个 GPIO sysfs 节点的)接口。
> diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
> index e3c076dd75a5..c9bf3ddd08b3 100644
> --- a/Documentation/translations/zh_TW/gpio.txt
> +++ b/Documentation/translations/zh_TW/gpio.txt
> @@ -622,30 +622,3 @@ GPIO 控制器的路徑類似 /sys/class/gpio/gpiochip42/ (對於從#42 GPIO
> 固定的,例如在擴展卡上的 GPIO會根據所使用的主板或所在堆疊架構中其他的板子而
> 有所不同。在這種情況下,你可能需要使用 gpiochip 節點(儘可能地結合電路圖)來
> 確定給定信號所用的 GPIO 編號。
> -
> -
> -從內核代碼中導出
> --------------
> -內核代碼可以明確地管理那些已通過 gpio_request()申請的 GPIO 的導出:
> -
> - /* 導出 GPIO 到用戶空間 */
> - int gpio_export(unsigned gpio, bool direction_may_change);
> -
> - /* gpio_export()的逆操作 */
> - void gpio_unexport();
> -
> - /* 創建一個 sysfs 連接到已導出的 GPIO 節點 */
> - int gpio_export_link(struct device *dev, const char *name,
> - unsigned gpio)
> -
> -在一個內核驅動申請一個 GPIO 之後，它可以通過 gpio_export()使其在 sysfs
> -接口中可見。該驅動可以控制信號方向是否可修改。這有助於防止用戶空間代碼無意間
> -破壞重要的系統狀態。
> -
> -這個明確的導出有助於(通過使某些實驗更容易來)調試，也可以提供一個始終存在的接口，
> -與文檔配合作爲板級支持包的一部分。
> -
> -在 GPIO 被導出之後，gpio_export_link()允許在 sysfs 文件系統的任何地方
> -創建一個到這個 GPIO sysfs 節點的符號連結。這樣驅動就可以通過一個描述性的
> -名字，在 sysfs 中他們所擁有的設備下提供一個(到這個 GPIO sysfs 節點的)接口。
> -
> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
> index ee91d81ebbfd..4a258e33021d 100644
> --- a/arch/arm/mach-davinci/board-dm646x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
> @@ -19,7 +19,7 @@
> #include <linux/kernel.h>
> #include <linux/init.h>
> #include <linux/leds.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/i2c.h>
> #include <linux/property.h>
> @@ -249,7 +249,7 @@ static int evm_led_teardown(struct i2c_client *client, int gpio,
> return 0;
> }
>
> -static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
> +static struct gpio_desc *evm_sw_gpio[4];
>
> static int evm_sw_setup(struct i2c_client *client, int gpio,
> unsigned ngpio, void *c)
> @@ -259,17 +259,19 @@ static int evm_sw_setup(struct i2c_client *client, int gpio,
> char label[10];
>
> for (i = 0; i < 4; ++i) {
> + struct gpio_desc *desc = gpio_to_desc(gpio + i);
> +
> snprintf(label, 10, "user_sw%d", i);
> - status = gpio_request(gpio, label);
> + status = gpio_request(gpio + i, label);
Shouldn't be gpiod_get() or so at the end?
> if (status)
> goto out_free;
> - evm_sw_gpio[i] = gpio++;
> + evm_sw_gpio[i] = desc;
>
> - status = gpio_direction_input(evm_sw_gpio[i]);
> + status = gpiod_direction_input(desc);
> if (status)
> goto out_free;
>
> - status = gpio_export(evm_sw_gpio[i], 0);
> + status = gpiod_export(desc, 0);
> if (status)
> goto out_free;
> }
> @@ -277,9 +279,9 @@ static int evm_sw_setup(struct i2c_client *client, int gpio,
>
> out_free:
> for (i = 0; i < 4; ++i) {
> - if (evm_sw_gpio[i] != -EINVAL) {
> - gpio_free(evm_sw_gpio[i]);
> - evm_sw_gpio[i] = -EINVAL;
> + if (evm_sw_gpio[i]) {
> + gpio_free(pin + i);
> + evm_sw_gpio[i] = NULL;
> }
> }
> return status;
> @@ -291,10 +293,10 @@ static int evm_sw_teardown(struct i2c_client *client, int gpio,
> int i;
>
> for (i = 0; i < 4; ++i) {
> - if (evm_sw_gpio[i] != -EINVAL) {
> - gpio_unexport(evm_sw_gpio[i]);
> - gpio_free(evm_sw_gpio[i]);
> - evm_sw_gpio[i] = -EINVAL;
> + if (evm_sw_gpio[i]) {
> + gpiod_unexport(evm_sw_gpio[i]);
> + gpio_free(gpio + i);
> + evm_sw_gpio[i] = NULL;
> }
> }
> return 0;
> diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
> index e7fd29a502a0..1fdf7fcf091e 100644
> --- a/arch/arm/mach-omap2/pdata-quirks.c
> +++ b/arch/arm/mach-omap2/pdata-quirks.c
> @@ -6,6 +6,7 @@
> */
> #include <linux/clk.h>
> #include <linux/davinci_emac.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/init.h>
> #include <linux/kernel.h>
> @@ -120,7 +121,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
> if (res)
> return res;
>
> - gpio_export(gpio, 0);
> + gpiod_export(gpio_to_desc(gpio), 0);
>
> return 0;
> }
> @@ -135,7 +136,7 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
> return;
> }
>
> - gpio_export(gpio, 0);
> + gpiod_export(gpio_to_desc(gpio), 0);
>
> udelay(10);
> gpio_set_value(gpio, 1);
> @@ -212,8 +213,8 @@ static void __init omap3_sbc_t3517_wifi_init(void)
> return;
> }
>
> - gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
> - gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
> + gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
> + gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
>
> msleep(100);
> gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
> diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
> index c77b5f00a66a..151792162152 100644
> --- a/arch/sh/boards/mach-ap325rxa/setup.c
> +++ b/arch/sh/boards/mach-ap325rxa/setup.c
> @@ -18,6 +18,7 @@
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio/machine.h>
> #include <linux/i2c.h>
> #include <linux/init.h>
> @@ -411,16 +412,16 @@ static int __init ap325rxa_devices_setup(void)
> /* LD3 and LD4 LEDs */
> gpio_request(GPIO_PTX5, NULL); /* RUN */
> gpio_direction_output(GPIO_PTX5, 1);
> - gpio_export(GPIO_PTX5, 0);
> + gpiod_export(gpio_to_desc(GPIO_PTX5), 0);
>
> gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
> gpio_direction_output(GPIO_PTX4, 0);
> - gpio_export(GPIO_PTX4, 0);
> + gpiod_export(gpio_to_desc(GPIO_PTX4), 0);
>
> /* SW1 input */
> gpio_request(GPIO_PTF7, NULL); /* MODE */
> gpio_direction_input(GPIO_PTF7);
> - gpio_export(GPIO_PTF7, 0);
> + gpiod_export(gpio_to_desc(GPIO_PTF7), 0);
>
> /* LCDC */
> gpio_request(GPIO_FN_LCDD15, NULL);
> diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
> index 4098bc7f88b7..a83fba3649c4 100644
> --- a/drivers/gpio/gpiolib-sysfs.c
> +++ b/drivers/gpio/gpiolib-sysfs.c
> @@ -511,7 +511,7 @@ static ssize_t unexport_store(struct class *class,
> goto done;
>
> desc = gpio_to_desc(gpio);
> - /* reject bogus commands (gpio_unexport ignores them) */
> + /* reject bogus commands (gpiod_unexport ignores them) */
> if (!desc) {
> pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
> return -EINVAL;
> @@ -814,7 +814,7 @@ static int __init gpiolib_sysfs_init(void)
> * early (e.g. before the class_register above was called).
> *
> * We run before arch_initcall() so chip->dev nodes can have
> - * registered, and so arch_initcall() can always gpio_export().
> + * registered, and so arch_initcall() can always gpiod_export().
> */
> spin_lock_irqsave(&gpio_lock, flags);
> list_for_each_entry(gdev, &gpio_devices, list) {
> diff --git a/drivers/media/i2c/noon010pc30.c b/drivers/media/i2c/noon010pc30.c
> index f3ac379ef34a..6faa44eb5354 100644
> --- a/drivers/media/i2c/noon010pc30.c
> +++ b/drivers/media/i2c/noon010pc30.c
> @@ -10,6 +10,7 @@
> */
>
> #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> @@ -755,7 +756,7 @@ static int noon010_probe(struct i2c_client *client,
> goto np_err;
> }
> info->gpio_nreset = pdata->gpio_nreset;
> - gpio_export(info->gpio_nreset, 0);
> + gpiod_export(gpio_to_desc(info->gpio_nreset), 0);
> }
>
> if (gpio_is_valid(pdata->gpio_nstby)) {
> @@ -767,7 +768,7 @@ static int noon010_probe(struct i2c_client *client,
> goto np_err;
> }
> info->gpio_nstby = pdata->gpio_nstby;
> - gpio_export(info->gpio_nstby, 0);
> + gpiod_export(gpio_to_desc(info->gpio_nstby), 0);
> }
>
> for (i = 0; i < NOON010_NUM_SUPPLIES; i++)
> diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c
> index c313e11a9754..021acd20ede2 100644
> --- a/drivers/media/i2c/ov9650.c
> +++ b/drivers/media/i2c/ov9650.c
> @@ -1426,9 +1426,9 @@ static int ov965x_configure_gpios_pdata(struct ov965x *ov965x,
> return ret;
> v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio);
>
> - gpio_set_value_cansleep(gpio, 1);
> - gpio_export(gpio, 0);
> ov965x->gpios[i] = gpio_to_desc(gpio);
> + gpiod_set_value_cansleep(ov965x->gpios[i], 1);
> + gpiod_export(ov965x->gpios[i], 0);
> }
>
> return 0;
> diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c
> index af9a305242cd..419d03fcc978 100644
> --- a/drivers/media/i2c/s5k4ecgx.c
> +++ b/drivers/media/i2c/s5k4ecgx.c
> @@ -15,6 +15,7 @@
> #include <linux/ctype.h>
> #include <linux/delay.h>
> #include <linux/firmware.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/i2c.h>
> #include <linux/module.h>
> @@ -852,7 +853,7 @@ static int s5k4ecgx_config_gpio(int nr, int val, const char *name)
> return 0;
> ret = gpio_request_one(nr, flags, name);
> if (!ret)
> - gpio_export(nr, 0);
> + gpiod_export(gpio_to_desc(nr), 0);
>
> return ret;
> }
> diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c
> index 524912f20d9f..f7cef598f21d 100644
> --- a/drivers/media/pci/sta2x11/sta2x11_vip.c
> +++ b/drivers/media/pci/sta2x11/sta2x11_vip.c
> @@ -18,6 +18,7 @@
> #include <linux/pci.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/i2c.h>
> #include <linux/delay.h>
> @@ -893,6 +894,7 @@ static int sta2x11_vip_init_controls(struct sta2x11_vip *vip)
> static int vip_gpio_reserve(struct device *dev, int pin, int dir,
> const char *name)
> {
> + struct gpio_desc *desc = gpio_to_desc(pin);
> int ret = -ENODEV;
>
> if (!gpio_is_valid(pin))
> @@ -904,7 +906,7 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
> return ret;
> }
>
> - ret = gpio_direction_output(pin, dir);
> + ret = gpiod_direction_output(desc, dir);
> if (ret) {
> dev_err(dev, "Failed to set direction for pin %d (%s)\n",
> pin, name);
> @@ -912,7 +914,7 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
> return ret;
> }
>
> - ret = gpio_export(pin, false);
> + ret = gpiod_export(desc, false);
> if (ret) {
> dev_err(dev, "Failed to export pin %d (%s)\n", pin, name);
> gpio_free(pin);
> @@ -932,8 +934,10 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
> static void vip_gpio_release(struct device *dev, int pin, const char *name)
> {
> if (gpio_is_valid(pin)) {
> + struct gpio_desc *desc = gpio_to_desc(pin);
> +
> dev_dbg(dev, "releasing pin %d (%s)\n", pin, name);
> - gpio_unexport(pin);
> + gpiod_unexport(desc);
> gpio_free(pin);
> }
> }
> diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
> index 54fb6cbd2aa0..2388fb4d0121 100644
> --- a/drivers/mfd/dm355evm_msp.c
> +++ b/drivers/mfd/dm355evm_msp.c
> @@ -11,6 +11,7 @@
> #include <linux/clk.h>
> #include <linux/module.h>
> #include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/gpio/machine.h>
> #include <linux/leds.h>
> @@ -329,7 +330,7 @@ static int add_children(struct i2c_client *client)
> gpio_request_one(gpio, GPIOF_IN, config_inputs[i].label);
>
> /* make it easy for userspace to see these */
> - gpio_export(gpio, false);
> + gpiod_export(gpio_to_desc(gpio), false);
> }
>
> /* MMC/SD inputs -- right after the last config input */
> diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
> index ece6ff6049f6..6252907b2c92 100644
> --- a/drivers/net/ieee802154/ca8210.c
> +++ b/drivers/net/ieee802154/ca8210.c
> @@ -51,6 +51,7 @@
> #include <linux/clk-provider.h>
> #include <linux/debugfs.h>
> #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/gpio.h>
> #include <linux/ieee802154.h>
> #include <linux/io.h>
> @@ -2895,7 +2896,7 @@ static int ca8210_interrupt_init(struct spi_device *spi)
> );
> if (ret) {
> dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
> - gpio_unexport(pdata->gpio_irq);
> + gpiod_unexport(gpio_to_desc(pdata->gpio_irq));
> gpio_free(pdata->gpio_irq);
> }
>
> diff --git a/include/linux/gpio.h b/include/linux/gpio.h
> index 64cc8f09eba8..7ceb93678689 100644
> --- a/include/linux/gpio.h
> +++ b/include/linux/gpio.h
> @@ -144,26 +144,6 @@ extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *labe
> extern int gpio_request_array(const struct gpio *array, size_t num);
> extern void gpio_free_array(const struct gpio *array, size_t num);
>
> -/*
> - * A sysfs interface can be exported by individual drivers if they want,
> - * but more typically is configured entirely from userspace.
> - */
> -static inline int gpio_export(unsigned gpio, bool direction_may_change)
> -{
> - return gpiod_export(gpio_to_desc(gpio), direction_may_change);
> -}
> -
> -static inline int gpio_export_link(struct device *dev, const char *name,
> - unsigned gpio)
> -{
> - return gpiod_export_link(dev, name, gpio_to_desc(gpio));
> -}
> -
> -static inline void gpio_unexport(unsigned gpio)
> -{
> - gpiod_unexport(gpio_to_desc(gpio));
> -}
> -
> /* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
>
> struct device;
> @@ -253,27 +233,6 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
> WARN_ON(1);
> }
>
> -static inline int gpio_export(unsigned gpio, bool direction_may_change)
> -{
> - /* GPIO can never have been requested or set as {in,out}put */
> - WARN_ON(1);
> - return -EINVAL;
> -}
> -
> -static inline int gpio_export_link(struct device *dev, const char *name,
> - unsigned gpio)
> -{
> - /* GPIO can never have been exported */
> - WARN_ON(1);
> - return -EINVAL;
> -}
> -
> -static inline void gpio_unexport(unsigned gpio)
> -{
> - /* GPIO can never have been exported */
> - WARN_ON(1);
> -}
> -
> static inline int gpio_to_irq(unsigned gpio)
> {
> /* GPIO can never have been requested or set as input */
> --
> 2.29.2
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists