| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YZNq+Y07kwhbIboe@matsya>
Date: Tue, 16 Nov 2021 13:55:29 +0530
From: Vinod Koul <vkoul@...nel.org>
To: quic_vamslank@...cinc.com
Cc: agross@...nel.org, bjorn.andersson@...aro.org,
mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
tglx@...utronix.de, maz@...nel.org, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, manivannan.sadhasivam@...aro.org
Subject: Re: [PATCH v4 2/6] clk: qcom: Add LUCID_EVO PLL type for SDX65
On 15-11-21, 23:38, quic_vamslank@...cinc.com wrote:
> From: Vamsi Krishna Lanka <quic_vamslank@...cinc.com>
>
> Add a LUCID_EVO PLL type for SDX65 SoC from Qualcomm.
>
> Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@...cinc.com>
> ---
> drivers/clk/qcom/clk-alpha-pll.c | 171 +++++++++++++++++++++++++++++++
> drivers/clk/qcom/clk-alpha-pll.h | 3 +
> 2 files changed, 174 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index eaedcceb766f..b2dbb8d56773 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
This line should ideally come after the below line..
> * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
> */
>
> @@ -139,6 +140,20 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
> [PLL_OFF_OPMODE] = 0x28,
> [PLL_OFF_STATUS] = 0x38,
> },
> + [CLK_ALPHA_PLL_TYPE_LUCID_EVO] = {
> + [PLL_OFF_OPMODE] = 0x04,
> + [PLL_OFF_STATUS] = 0x0c,
> + [PLL_OFF_L_VAL] = 0x10,
> + [PLL_OFF_ALPHA_VAL] = 0x14,
> + [PLL_OFF_USER_CTL] = 0x18,
> + [PLL_OFF_USER_CTL_U] = 0x1c,
> + [PLL_OFF_CONFIG_CTL] = 0x20,
> + [PLL_OFF_CONFIG_CTL_U] = 0x24,
> + [PLL_OFF_CONFIG_CTL_U1] = 0x28,
> + [PLL_OFF_TEST_CTL] = 0x2c,
> + [PLL_OFF_TEST_CTL_U] = 0x30,
> + [PLL_OFF_TEST_CTL_U1] = 0x34,
> + },
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>
> @@ -175,6 +190,10 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> #define LUCID_5LPE_PLL_LATCH_INPUT BIT(14)
> #define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21)
>
> +/* LUCID EVO PLL specific settings and offsets */
> +#define LUCID_EVO_ENABLE_VOTE_RUN BIT(25)
> +#define LUCID_EVO_PLL_L_VAL_MASK GENMASK(15, 0)
> +
> /* ZONDA PLL specific */
> #define ZONDA_PLL_OUT_MASK 0xf
> #define ZONDA_STAY_IN_CFA BIT(16)
> @@ -1951,3 +1970,155 @@ const struct clk_ops clk_alpha_pll_zonda_ops = {
> .set_rate = clk_zonda_pll_set_rate,
> };
> EXPORT_SYMBOL(clk_alpha_pll_zonda_ops);
> +
> +static int alpha_pll_lucid_evo_enable(struct clk_hw *hw)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + struct regmap *regmap = pll->clkr.regmap;
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
> + if (ret)
> + return ret;
> +
> + /* If in FSM mode, just vote for it */
> + if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
> + ret = clk_enable_regmap(hw);
> + if (ret)
> + return ret;
> + return wait_for_pll_enable_lock(pll);
> + }
> +
> + /* Check if PLL is already enabled */
> + ret = trion_pll_is_enabled(pll, regmap);
> + if (ret < 0)
> + return ret;
> + else if (ret) {
> + pr_warn("%s PLL is already enabled\n",
> + clk_hw_get_name(&pll->clkr.hw));
this should fit in a single line
> + return 0;
> + }
> +
> + ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> + if (ret)
> + return ret;
> +
> + /* Set operation mode to RUN */
> + regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
> +
> + ret = wait_for_pll_enable_lock(pll);
> + if (ret)
> + return ret;
> +
> + /* Enable the PLL outputs */
> + ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
> + if (ret)
> + return ret;
> +
> + /* Enable the global PLL outputs */
> + ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> + if (ret)
> + return ret;
> +
> + /* Ensure that the write above goes through before returning. */
> + mb();
> + return ret;
> +}
> +
> +static void alpha_pll_lucid_evo_disable(struct clk_hw *hw)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + struct regmap *regmap = pll->clkr.regmap;
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
> + if (ret)
> + return;
> +
> + /* If in FSM mode, just unvote it */
> + if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
> + clk_disable_regmap(hw);
> + return;
> + }
> +
> + /* Disable the global PLL output */
> + ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
> + if (ret)
> + return;
> +
> + /* Disable the PLL outputs */
> + ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
> + if (ret)
> + return;
> +
> + /* Place the PLL mode in STANDBY */
> + regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
> +}
> +
> +static unsigned long alpha_pll_lucid_evo_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
pls align this to preceding line open brace
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + struct regmap *regmap = pll->clkr.regmap;
> + u32 l, frac;
> +
> + regmap_read(regmap, PLL_L_VAL(pll), &l);
> + l &= LUCID_EVO_PLL_L_VAL_MASK;
> + regmap_read(regmap, PLL_ALPHA_VAL(pll), &frac);
> +
> + return alpha_pll_calc_rate(parent_rate, l, frac, pll_alpha_width(pll));
> +}
I think this can use __alpha_pll_trion_set_rate()
> +
> +static int clk_lucid_evo_pll_postdiv_set_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long parent_rate)
> +{
> + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> + struct regmap *regmap = pll->clkr.regmap;
> + int i, val, div, ret;
> +
> + /*
> + * If the PLL is in FSM mode, then treat set_rate callback as a
> + * no-operation.
> + */
> + ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
> + if (ret)
> + return ret;
> +
> + if (val & LUCID_EVO_ENABLE_VOTE_RUN)
> + return 0;
> +
> + if (!pll->post_div_table) {
> + pr_err("Missing the post_div_table for the PLL\n");
> + return -EINVAL;
> + }
> +
> + div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> + for (i = 0; i < pll->num_post_div; i++) {
> + if (pll->post_div_table[i].div == div) {
> + val = pll->post_div_table[i].val;
> + break;
> + }
> + }
> +
> + return regmap_update_bits(regmap, PLL_USER_CTL(pll),
> + (BIT(pll->width) - 1) << pll->post_div_shift,
> + val << pll->post_div_shift);
> +}
This looks _very_ similar to clk_lucid_5lpe_pll_postdiv_set_rate() maybe
add a helper which both can use and pass on the
LUCID_EVO_ENABLE_VOTE_RUN as argument to helper?
--
~Vinod
Powered by blists - more mailing lists