Message-ID: <1780573.2WWZn4uiS5@diego>
Date:   Tue, 23 Nov 2021 22:50:56 +0100
From:   Heiko Stübner <heiko@...ech.de>
To:     Atish Patra <atishp@...shpatra.org>
Cc:     Guo Ren <guoren@...nel.org>, Anup Patel <anup@...infault.org>,
        Palmer Dabbelt <palmer@...belt.com>, atishp@...osinc.com,
        linux-riscv <linux-riscv@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org List" <linux-kernel@...r.kernel.org>,
        Linux Doc Mailing List <linux-doc@...r.kernel.org>,
        Guo Ren <guoren@...ux.alibaba.com>,
        Philipp Tomsich <philipp.tomsich@...ll.eu>
Subject: Re: [RFC PATCH 0/3] riscv: Add riscv.fwsz kernel parameter to save memory

Am Dienstag, 23. November 2021, 21:01:29 CET schrieb Atish Patra:
> On Tue, Nov 23, 2021 at 11:33 AM Heiko Stübner <heiko@...ech.de> wrote:
> >
> > Hi Guo,
> >
> > Am Dienstag, 23. November 2021, 02:57:14 CET schrieb guoren@...nel.org:
> > > From: Guo Ren <guoren@...ux.alibaba.com>
> > >
> > > The firmware of riscv (such as opensbi) occupy 2MB(64bit) /
> > > 4MB(32bit) in Linux. It's very wasteful to small memory footprint
> > > soc chip such as Allwinner D1s/F133. The kernel parameter gives a
> > > chance to users to set the proper size of the firmware and get
> > > more than 1.5MB of memory.
> >
> > is this kernel parameter approach a result of the T-Head Ice-SoC
> > currently loading its openSBI from inside the main u-boot via extfs-load,
> > directly before the kernel itself [0] ?
> 
> Looking at the defconfig[1], it may be U-Boot SPL not U-Boot proper. I
> may be looking at the wrong config though.

It is actually uboot-spl + uboot proper (aka the standard spl loads u-boot
way) which is the reason I pointed to using the existing u-boot facilities :-)



> If U-Boot SPL is actually used, you don't even need to manually load
> OpenSBI "fw_jump" binary.
> 
> As Heiko pointed, you should just follow how U-Boot SPL works on
> hifive unmatched (creating the FIT image)
> The standard U-Boot SPL uses with fw_dynamic which provides all the
> flexibility you want.
> 
> [1] https://github.com/T-head-Semi/u-boot/blob/main/configs/ice_evb_c910_defconfig
> >
> > Because that approach in general looks not ideal.
> >
> > Normally you want the main u-boot already running with less privileges
> > so firmware like openSBI should've been already loaded before that.
> > Even more true when you're employing methods to protect memory regions
> > from less privileged access.
> >
> > A lot of socs set u-boot as opensbi payload, but for the example the D1
> > mainline approach uses the Allwinner TOC1 image format to load both
> > opensbi and the main uboot into memory from its 1st stage loader.
> >
> >
> > Of course the best way would be to just mimic what a number of
> > arm64 and also riscv socs do and use already existing u-boot utilities.
> >
> > U-Boot can create a FIT image containing both main u-boot, dtb and
> > firmware images that all get loaded from SPL and placed at the correct
> > addresses before having the SPL jump into opensbi and from there
> > into u-boot [1] .
> >
> > And as Anup was writing, reserved-memory should then be the way
> > to go to tell the kernel what regions to omit.
> >
> > And mainline u-boot has already the means to even take the reserved-memory
> > from the devicetree used by opensbi and copy it to a new devicetree,
> > if the second one is different.
> >
> >
> > Heiko
> >
> >
> > [0] https://github.com/T-head-Semi/u-boot/blob/main/include/configs/ice-c910.h#L46
> > [1] see spl_invoke_opensbi() in common/spl/spl_opensbi.c
> > [2] see riscv_board_reserved_mem_fixup() in arch/riscv/lib/fdt_fixup.c
> >
> > >
> > > Guo Ren (3):
> > >   riscv: Remove 2MB offset in the mm layout
> > >   riscv: Add early_param to decrease firmware region
> > >   riscv: Add riscv.fwsz kernel parameter
> > >
> > >  .../admin-guide/kernel-parameters.txt         |  3 +++
> > >  arch/riscv/include/asm/page.h                 |  8 +++++++
> > >  arch/riscv/kernel/head.S                      | 10 +++-----
> > >  arch/riscv/kernel/vmlinux.lds.S               |  5 ++--
> > >  arch/riscv/mm/init.c                          | 23 ++++++++++++++++---
> > >  5 files changed, 36 insertions(+), 13 deletions(-)
> > >
> > >
> >
> >
> >
> >
> >
> > _______________________________________________
> > linux-riscv mailing list
> > linux-riscv@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
> 
> 
> 
> 

Powered by blists - more mailing lists