linux-kernel - Re: [PATCH v4 4/4] arm64: dts: qcom: sc7280: Add Display Port node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YaeTckalY6BZJqdb@builder.lan>
Date:   Wed, 1 Dec 2021 09:23:30 -0600
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Sankeerth Billakanti <quic_sbillaka@...cinc.com>
Cc:     dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
        freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, agross@...nel.org, robh+dt@...nel.org,
        Kuogee Hsieh <khsieh@...eaurora.org>, robdclark@...il.com,
        seanpaul@...omium.org, swboyd@...omium.org,
        quic_kalyant@...cinc.com, quic_abhinavk@...cinc.com,
        dianders@...omium.org, quic_khsieh@...cinc.com,
        quic_mkrishn@...cinc.com
Subject: Re: [PATCH v4 4/4] arm64: dts: qcom: sc7280: Add Display Port node

On Mon 22 Nov 05:29 CST 2021, Sankeerth Billakanti wrote:

> From: Kuogee Hsieh <khsieh@...eaurora.org>
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
> Reviewed-by: Stephen Boyd <swboyd@...omium.org>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@...cinc.com>

Can you please update this to make From: and Signed-off-by: match.


Also I don't know how you prepared this patch series, because this says
patch 4/4, but it's not part of the same series as the other patches.

I did pick up the first  3 patches, but then noticed that you are back
at using the original labels, so please see below and send all 4 patches
in a proper series.

> ---
> 
> Changes in v4:
>     - Add the patch to display DT change series (Bjorn Andersson)
>     - Remove the trailing whitespaces
> 
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 +++++++++++++++++++++++++++++++++++-
>  1 file changed, 88 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 5ad500e..0b2ffd5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2693,8 +2693,8 @@
>  				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
>  				 <&dsi_phy 0>,
>  				 <&dsi_phy 1>,
> -				 <0>,
> -				 <0>,
> +				 <&dp_phy 0>,
> +				 <&dp_phy 1>,
>  				 <&edp_phy 0>,
>  				 <&edp_phy 1>;
>  			clock-names = "bi_tcxo",
> @@ -2791,6 +2791,13 @@
>  							remote-endpoint = <&edp_in>;
>  						};
>  					};
> +
> +					port@2 {
> +                                                reg = <2>;
> +                                                dpu_intf0_out: endpoint {
> +                                                        remote-endpoint = <&dp_in>;
> +                                                };
> +                                        };
>  				};
>  
>  				mdp_opp_table: opp-table {
> @@ -3002,6 +3009,79 @@
>  
>  				status = "disabled";
>  			};
> +
> +			msm_dp: displayport-controller@...0000 {

As requested previously, can you please label this mdss_dp, to make it
sort nicely in the dts?

Thanks,
Bjorn

> +				compatible = "qcom,sc7280-dp";
> +
> +				reg = <0 0x0ae90000 0 0x1400>;
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <12>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
> +				clock-names =	"core_iface",
> +						"core_aux",
> +						"ctrl_link",
> +						"ctrl_link_iface",
> +						"stream_pixel";
> +				#clock-cells = <1>;
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
> +						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
> +				phys = <&dp_phy>;
> +				phy-names = "dp";
> +
> +				operating-points-v2 = <&dp_opp_table>;
> +				power-domains = <&rpmhpd SC7280_CX>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					port@0 {
> +						reg = <0>;
> +						dp_in: endpoint {
> +							remote-endpoint = <&dpu_intf0_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						dp_out: endpoint { };
> +					};
> +				};
> +
> +				dp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
>  		};
>  
>  		pdc: interrupt-controller@...0000 {
> @@ -3104,6 +3184,12 @@
>  				bias-pull-up;
>  			};
>  
> +			dp_hot_plug_det: dp-hot-plug-det {
> +				pins = "gpio47";
> +				function = "dp_hot";
> +				bias-disable;
> +                        };
> +
>  			qspi_clk: qspi-clk {
>  				pins = "gpio14";
>  				function = "qspi_clk";
> -- 
> 2.7.4
>