| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Yan52hNKKZMgzleI@kroah.com>
Date: Fri, 3 Dec 2021 12:04:58 +0100
From: Greg KH <greg@...ah.com>
To: Souradeep Chowdhury <quic_schowdhu@...cinc.com>
Cc: linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, pure.logic@...us-software.ie,
bjorn.andersson@...aro.org, robh@...nel.org,
linux-kernel@...r.kernel.org, quic_tsoni@...cinc.com,
quic_psodagud@...cinc.com, quic_satyap@...cinc.com,
quic_pheragu@...cinc.com, quic_rjendra@...cinc.com,
quic_sibis@...cinc.com, quic_saipraka@...cinc.com
Subject: Re: [PATCH V2 5/8] soc: qcom: eud: Add driver support for Embedded
USB Debugger(EUD)
On Thu, Dec 02, 2021 at 03:21:24PM +0530, Souradeep Chowdhury wrote:
> Add support for control peripheral of EUD (Embedded USB Debugger) to
> listen to events such as USB attach/detach, pet EUD to indicate software
> is functional.Reusing the platform device kobj, sysfs entry 'enable' is
> created to enable or disable EUD.
>
> To enable the eud the following needs to be done
> echo 1 > /sys/bus/platform/.../enable
>
> To disable eud, following is the command
> echo 0 > /sys/bus/platform/.../enable
>
> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@...cinc.com>
> ---
> Documentation/ABI/testing/sysfs-driver-eud | 9 +
> drivers/soc/qcom/Kconfig | 10 ++
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/qcom_eud.c | 268 +++++++++++++++++++++++++++++
> 4 files changed, 288 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-driver-eud
> create mode 100644 drivers/soc/qcom/qcom_eud.c
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-eud b/Documentation/ABI/testing/sysfs-driver-eud
> new file mode 100644
> index 0000000..eaf2e82
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-eud
> @@ -0,0 +1,9 @@
> +What: /sys/bus/platform/drivers/eud/.../enable
> +Date: October 2021
You sent this patch in December 2021 :(
> +Contact: Souradeep Chowdhury <quic_schowdhu@...cinc.com>
> +Description:
> + The Enable/Disable sysfs interface for Embedded
> + USB Debugger(EUD). This enables and disables the
> + EUD based on a 1 or a 0 value. By enabling EUD,
> + the user is able to activate the mini-usb hub of
> + EUD for debug and trace capabilities.
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 79b568f..a4db41b 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -42,6 +42,16 @@ config QCOM_CPR
> To compile this driver as a module, choose M here: the module will
> be called qcom-cpr
>
> +config QCOM_EUD
> + tristate "QCOM Embedded USB Debugger(EUD) Driver"
> + select USB_ROLE_SWITCH
> + help
> + This module enables support for Qualcomm Technologies, Inc.
> + Embedded USB Debugger (EUD). The EUD is a control peripheral
> + which reports VBUS attach/detach events and has USB-based
> + debug and trace capabilities. On selecting m, the module name
> + that is built is qcom_eud.ko
> +
> config QCOM_GENI_SE
> tristate "QCOM GENI Serial Engine Driver"
> depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index ad675a6..3331a40 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -4,6 +4,7 @@ obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o
> obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
> obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
> obj-$(CONFIG_QCOM_CPR) += cpr.o
> +obj-$(CONFIG_QCOM_EUD) += qcom_eud.o
> obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
> obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
> obj-$(CONFIG_QCOM_OCMEM) += ocmem.o
> diff --git a/drivers/soc/qcom/qcom_eud.c b/drivers/soc/qcom/qcom_eud.c
> new file mode 100644
> index 0000000..613ac41
> --- /dev/null
> +++ b/drivers/soc/qcom/qcom_eud.c
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/usb/role.h>
> +
> +#define EUD_REG_INT1_EN_MASK 0x0024
> +#define EUD_REG_INT_STATUS_1 0x0044
> +#define EUD_REG_CTL_OUT_1 0x0074
> +#define EUD_REG_VBUS_INT_CLR 0x0080
> +#define EUD_REG_CSR_EUD_EN 0x1014
> +#define EUD_REG_SW_ATTACH_DET 0x1018
> +#define EUD_REG_EUD_EN2 0x0000
> +
> +#define EUD_ENABLE BIT(0)
> +#define EUD_INT_PET_EUD BIT(0)
> +#define EUD_INT_VBUS BIT(2)
> +#define EUD_INT_SAFE_MODE BIT(4)
> +#define EUD_INT_ALL (EUD_INT_VBUS|EUD_INT_SAFE_MODE)
> +
> +struct eud_chip {
> + struct device *dev;
> + struct usb_role_switch *role_sw;
> + void __iomem *eud_reg_base;
> + void __iomem *eud_mode_mgr2_phys_base;
> + unsigned int int_status;
> + int eud_irq;
> + bool enable;
> + bool usb_attach;
> +
> +};
> +
> +static int enable_eud(struct eud_chip *priv)
> +{
> + writel(EUD_ENABLE, priv->eud_reg_base + EUD_REG_CSR_EUD_EN);
> + writel(EUD_INT_VBUS | EUD_INT_SAFE_MODE,
> + priv->eud_reg_base + EUD_REG_INT1_EN_MASK);
> + writel(1, priv->eud_mode_mgr2_phys_base + EUD_REG_EUD_EN2);
> +
> + return usb_role_switch_set_role(priv->role_sw, USB_ROLE_DEVICE);
> +}
> +
> +static void disable_eud(struct eud_chip *priv)
> +{
> + writel(0, priv->eud_reg_base + EUD_REG_CSR_EUD_EN);
> + writel(0, priv->eud_mode_mgr2_phys_base + EUD_REG_EUD_EN2);
> +}
> +
> +static ssize_t enable_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct eud_chip *chip = dev_get_drvdata(dev);
> +
> + return sysfs_emit(buf, "%d\n", chip->enable);
> +}
> +
> +static ssize_t enable_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct eud_chip *chip = dev_get_drvdata(dev);
> + bool enable;
> + int ret;
> +
> + if (kstrtobool(buf, &enable))
> + return -EINVAL;
> +
> + if (enable) {
> + ret = enable_eud(chip);
> + if (!ret)
> + chip->enable = enable;
> + } else {
> + disable_eud(chip);
> + }
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR_RW(enable);
> +
> +static struct attribute *eud_attrs[] = {
> + &dev_attr_enable.attr,
> + NULL,
> +};
> +
> +static struct attribute_group attr_group = {
> + .attrs = eud_attrs,
> +};
> +
> +static const struct attribute_group *attr_groups[] = {
> + &attr_group,
> + NULL
> +};
ATTRIBUTE_GROUPS()?
thanks,
greg k-h
Powered by blists - more mailing lists