lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <61b0bf59.1c69fb81.9d656.8423@mx.google.com>
Date:   Wed, 8 Dec 2021 15:21:11 +0100
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Vladimir Oltean <olteanv@...il.com>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org
Subject: Re: [net-next RFC PATCH v2 7/8] net: dsa: qca8k: Add support for
 mdio read/write in Ethernet packet

On Wed, Dec 08, 2021 at 02:18:50PM +0200, Vladimir Oltean wrote:
> On Wed, Dec 08, 2021 at 04:40:39AM +0100, Ansuel Smith wrote:
> > Add qca8k side support for mdio read/write in Ethernet packet.
> > qca8k supports some specially crafted Ethernet packet that can be used
> > for mdio read/write instead of the legacy method uart/internal mdio.
> > This add support for the qca8k side to craft the packet and enqueue it.
> > Each port and the qca8k_priv have a special struct to put data in it.
> > The completion API is used to wait for the packet to be received back
> > with the requested data.
> > 
> > The various steps are:
> > 1. Craft the special packet with the qca hdr set to mdio read/write
> >    mode.
> > 2. Set the lock in the dedicated mdio struct.
> > 3. Reinit the completion.
> > 4. Enqueue the packet.
> > 5. Wait the packet to be received.
> > 6. Use the data set by the tagger to complete the mdio operation.
> > 
> > If the completion timeouts or the ack value is not true, the legacy
> > mdio way is used.
> > 
> > It has to be considered that in the initial setup mdio is still used and
> > mdio is still used until DSA is ready to accept and tag packet.
> > 
> > tag_proto_connect() is used to fill the required handler for the tagger
> > to correctly parse and elaborate the special Ethernet mdio packet.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
> > ---
> >  drivers/net/dsa/qca8k.c     | 214 +++++++++++++++++++++++++++++++++++-
> >  drivers/net/dsa/qca8k.h     |   4 +
> >  include/linux/dsa/tag_qca.h |  10 ++
> >  3 files changed, 226 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> > index 96a7fbf8700c..5b7508a6e4ba 100644
> > --- a/drivers/net/dsa/qca8k.c
> > +++ b/drivers/net/dsa/qca8k.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/phylink.h>
> >  #include <linux/gpio/consumer.h>
> >  #include <linux/etherdevice.h>
> > +#include <linux/dsa/tag_qca.h>
> >  
> >  #include "qca8k.h"
> >  
> > @@ -170,14 +171,162 @@ qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
> >  	return regmap_update_bits(priv->regmap, reg, mask, write_val);
> >  }
> >  
> > +static struct sk_buff *qca8k_alloc_mdio_header(struct qca8k_port_tag *header, enum mdio_cmd cmd,
> > +					       u32 reg, u32 *val)
> > +{
> > +	struct mdio_ethhdr *mdio_ethhdr;
> > +	struct sk_buff *skb;
> > +	u16 hdr;
> > +
> > +	skb = dev_alloc_skb(QCA_HDR_MDIO_PKG_LEN);
> > +
> > +	prefetchw(skb->data);
> > +
> > +	skb_reset_mac_header(skb);
> > +	skb_set_network_header(skb, skb->len);
> > +
> > +	mdio_ethhdr = skb_push(skb, QCA_HDR_MDIO_HEADER_LEN + QCA_HDR_LEN);
> > +
> > +	hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION);
> > +	hdr |= QCA_HDR_XMIT_FROM_CPU;
> > +	hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0));
> > +	hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG);
> > +
> > +	mdio_ethhdr->seq = FIELD_PREP(QCA_HDR_MDIO_SEQ_NUM, 200);
> > +
> > +	mdio_ethhdr->command = FIELD_PREP(QCA_HDR_MDIO_ADDR, reg);
> > +	mdio_ethhdr->command |= FIELD_PREP(QCA_HDR_MDIO_LENGTH, 4);
> > +	mdio_ethhdr->command |= FIELD_PREP(QCA_HDR_MDIO_CMD, cmd);
> > +	mdio_ethhdr->command |= FIELD_PREP(QCA_HDR_MDIO_CHECK_CODE, MDIO_CHECK_CODE_VAL);
> > +
> > +	if (cmd == MDIO_WRITE)
> > +		mdio_ethhdr->mdio_data = *val;
> > +
> > +	mdio_ethhdr->hdr = htons(hdr);
> > +
> > +	skb_put_zero(skb, QCA_HDR_MDIO_DATA2_LEN);
> > +	skb_put_zero(skb, QCA_HDR_MDIO_PADDING_LEN);
> > +
> > +	return skb;
> > +}
> > +
> > +static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val)
> > +{
> > +	struct qca8k_port_tag *header = priv->header_mdio;
> > +	struct sk_buff *skb;
> > +	bool ack;
> > +	int ret;
> > +
> > +	skb = qca8k_alloc_mdio_header(header, MDIO_READ, reg, 0);
> > +	skb->dev = dsa_to_port(priv->ds, 0)->master;
> > +
> > +	mutex_lock(&header->mdio_mutex);
> > +
> > +	reinit_completion(&header->rw_done);
> > +	header->seq = 200;
> > +	header->ack = false;
> > +
> > +	dev_queue_xmit(skb);
> > +
> > +	ret = wait_for_completion_timeout(&header->rw_done, QCA8K_MDIO_RW_ETHERNET);
> > +
> > +	*val = header->data[0];
> > +	ack = header->ack;
> > +
> > +	mutex_unlock(&header->mdio_mutex);
> > +
> > +	if (ret <= 0)
> > +		return -ETIMEDOUT;
> > +
> > +	if (!ack)
> > +		return -EINVAL;
> > +
> > +	return 0;
> > +}
> > +
> > +static void qca8k_rw_reg_ack_handler(struct dsa_port *dp, struct sk_buff *skb)
> > +{
> > +	struct qca8k_port_tag *header = dp->priv;
> > +	struct mdio_ethhdr *mdio_ethhdr;
> > +
> > +	mdio_ethhdr = (struct mdio_ethhdr *)skb_mac_header(skb);
> > +
> > +	header->data[0] = mdio_ethhdr->mdio_data;
> > +
> > +	/* Get the rest of the 12 byte of data */
> > +	memcpy(header->data + 1, skb->data, QCA_HDR_MDIO_DATA2_LEN);
> > +
> > +	/* Make sure the seq match the requested packet */
> > +	if (mdio_ethhdr->seq == header->seq)
> > +		header->ack = true;
> > +
> > +	complete(&header->rw_done);
> > +}
> > +
> > +static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 val)
> > +{
> > +	struct qca8k_port_tag *header = priv->header_mdio;
> > +	struct sk_buff *skb;
> > +	bool ack;
> > +	int ret;
> > +
> > +	skb = qca8k_alloc_mdio_header(header, MDIO_WRITE, reg, &val);
> > +	skb->dev = dsa_to_port(priv->ds, 0)->master;
> > +
> > +	mutex_lock(&header->mdio_mutex);
> > +
> > +	dev_queue_xmit(skb);
> > +
> > +	reinit_completion(&header->rw_done);
> > +	header->ack = false;
> > +	header->seq = 200;
> > +
> > +	ret = wait_for_completion_timeout(&header->rw_done, QCA8K_MDIO_RW_ETHERNET);
> > +
> > +	ack = header->ack;
> > +
> > +	mutex_unlock(&header->mdio_mutex);
> > +
> > +	if (ret <= 0)
> > +		return -ETIMEDOUT;
> > +
> > +	if (!ack)
> > +		return -EINVAL;
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> > +qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
> > +{
> > +	u32 val = 0;
> > +	int ret;
> > +
> > +	ret = qca8k_read_eth(priv, reg, &val);
> > +	if (ret)
> > +		return ret;
> > +
> > +	val &= ~mask;
> > +	val |= write_val;
> > +
> > +	return qca8k_write_eth(priv, reg, val);
> > +}
> > +
> >  static int
> >  qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
> >  {
> >  	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
> > +	struct qca8k_port_tag *header_mdio;
> >  	struct mii_bus *bus = priv->bus;
> >  	u16 r1, r2, page;
> >  	int ret;
> >  
> > +	header_mdio = priv->header_mdio;
> > +
> > +	if (header_mdio)
> > +		if (!qca8k_read_eth(priv, reg, val))
> > +			return 0;
> > +
> >  	qca8k_split_addr(reg, &r1, &r2, &page);
> >  
> >  	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
> > @@ -197,10 +346,17 @@ static int
> >  qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
> >  {
> >  	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
> > +	struct qca8k_port_tag *header_mdio;
> >  	struct mii_bus *bus = priv->bus;
> >  	u16 r1, r2, page;
> >  	int ret;
> >  
> > +	header_mdio = priv->header_mdio;
> > +
> > +	if (header_mdio)
> > +		if (!qca8k_write_eth(priv, reg, val))
> > +			return 0;
> > +
> >  	qca8k_split_addr(reg, &r1, &r2, &page);
> >  
> >  	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
> > @@ -220,11 +376,18 @@ static int
> >  qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
> >  {
> >  	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
> > +	struct qca8k_port_tag *header_mdio;
> >  	struct mii_bus *bus = priv->bus;
> >  	u16 r1, r2, page;
> >  	u32 val;
> >  	int ret;
> >  
> > +	header_mdio = priv->header_mdio;
> > +
> > +	if (header_mdio)
> > +		if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
> > +			return 0;
> > +
> >  	qca8k_split_addr(reg, &r1, &r2, &page);
> >  
> >  	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
> > @@ -1223,8 +1386,13 @@ qca8k_setup(struct dsa_switch *ds)
> >  	 * Configure specific switch configuration for ports
> >  	 */
> >  	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
> > +		struct dsa_port *dp = dsa_to_port(ds, i);
> > +
> > +		/* Set the header_mdio to be accessible by the qca tagger */
> > +		dp->priv = priv->header_mdio;
> 
> Why are you setting up the dp->priv pointer from the switch driver?
> I though the whole point of qca_tag_connect is to set up that memory by
> itself.
>

Yes sorry. I forgot to remove this from the my testing buildroot to the
clean linux repo. In the testing this wasn't present just to make it
clear.

> > +
> >  		/* CPU port gets connected to all user ports of the switch */
> > -		if (dsa_is_cpu_port(ds, i)) {
> > +		if (dsa_port_is_cpu(dp)) {
> >  			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
> >  					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
> >  			if (ret)
> > @@ -1232,7 +1400,7 @@ qca8k_setup(struct dsa_switch *ds)
> >  		}
> >  
> >  		/* Individual user ports get connected to CPU port only */
> > -		if (dsa_is_user_port(ds, i)) {
> > +		if (dsa_port_is_user(dp)) {
> >  			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
> >  					QCA8K_PORT_LOOKUP_MEMBER,
> >  					BIT(cpu_port));
> > @@ -2382,6 +2550,38 @@ qca8k_port_lag_leave(struct dsa_switch *ds, int port,
> >  	return qca8k_lag_refresh_portmap(ds, port, lag, true);
> >  }
> >  
> > +static int qca8k_tag_proto_connect(struct dsa_switch *ds,
> > +				   const struct dsa_device_ops *tag_ops)
> > +{
> > +	struct qca8k_priv *qca8k_priv = ds->priv;
> > +	struct qca8k_port_tag *priv;
> > +	struct dsa_port *dp;
> > +	int i;
> > +
> > +	switch (tag_ops->proto) {
> > +	case DSA_TAG_PROTO_QCA:
> > +		for (i = 0; i < QCA8K_NUM_PORTS; i++) {
> > +			dp = dsa_to_port(ds, i);
> > +			priv = dp->priv;
> > +
> > +			if (!dsa_port_is_cpu(dp))
> > +				continue;
> > +
> > +			mutex_init(&priv->mdio_mutex);
> > +			init_completion(&priv->rw_done);
> > +			/* Cache the header mdio */
> > +			qca8k_priv->header_mdio = priv;
> > +			priv->rw_reg_ack_handler = qca8k_rw_reg_ack_handler;
> > +		}
> > +
> > +		break;
> > +	default:
> > +		return -EOPNOTSUPP;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  static const struct dsa_switch_ops qca8k_switch_ops = {
> >  	.get_tag_protocol	= qca8k_get_tag_protocol,
> >  	.setup			= qca8k_setup,
> > @@ -2417,6 +2617,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
> >  	.get_phy_flags		= qca8k_get_phy_flags,
> >  	.port_lag_join		= qca8k_port_lag_join,
> >  	.port_lag_leave		= qca8k_port_lag_leave,
> > +	.tag_proto_connect	= qca8k_tag_proto_connect,
> >  };
> >  
> >  static int qca8k_read_switch_id(struct qca8k_priv *priv)
> > @@ -2452,6 +2653,7 @@ static int qca8k_read_switch_id(struct qca8k_priv *priv)
> >  static int
> >  qca8k_sw_probe(struct mdio_device *mdiodev)
> >  {
> > +	struct qca8k_port_tag *header_mdio;
> >  	struct qca8k_priv *priv;
> >  	int ret;
> >  
> > @@ -2462,6 +2664,13 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
> >  	if (!priv)
> >  		return -ENOMEM;
> >  
> > +	header_mdio = devm_kzalloc(&mdiodev->dev, sizeof(*header_mdio), GFP_KERNEL);
> > +	if (!header_mdio)
> > +		return -ENOMEM;
> > +
> > +	mutex_init(&header_mdio->mdio_mutex);
> > +	init_completion(&header_mdio->rw_done);
> > +
> >  	priv->bus = mdiodev->bus;
> >  	priv->dev = &mdiodev->dev;
> >  
> > @@ -2501,6 +2710,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
> >  	priv->ds->priv = priv;
> >  	priv->ops = qca8k_switch_ops;
> >  	priv->ds->ops = &priv->ops;
> > +	priv->header_mdio = header_mdio;
> >  	mutex_init(&priv->reg_mutex);
> >  	dev_set_drvdata(&mdiodev->dev, priv);
> >  
> > diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
> > index ab4a417b25a9..25aa1509e0c0 100644
> > --- a/drivers/net/dsa/qca8k.h
> > +++ b/drivers/net/dsa/qca8k.h
> > @@ -11,6 +11,9 @@
> >  #include <linux/delay.h>
> >  #include <linux/regmap.h>
> >  #include <linux/gpio.h>
> > +#include <linux/dsa/tag_qca.h>
> > +
> > +#define QCA8K_MDIO_RW_ETHERNET				100
> >  
> >  #define QCA8K_NUM_PORTS					7
> >  #define QCA8K_NUM_CPU_PORTS				2
> > @@ -353,6 +356,7 @@ struct qca8k_priv {
> >  	struct dsa_switch_ops ops;
> >  	struct gpio_desc *reset_gpio;
> >  	unsigned int port_mtu[QCA8K_NUM_PORTS];
> > +	struct qca8k_port_tag *header_mdio;
> >  };
> >  
> >  struct qca8k_mib_desc {
> > diff --git a/include/linux/dsa/tag_qca.h b/include/linux/dsa/tag_qca.h
> > index f403fdab6f29..2b823d971ae9 100644
> > --- a/include/linux/dsa/tag_qca.h
> > +++ b/include/linux/dsa/tag_qca.h
> > @@ -59,11 +59,21 @@ struct mdio_ethhdr {
> >  	u16 hdr;		/* qca hdr */
> >  } __packed;
> >  
> > +enum mdio_cmd {
> > +	MDIO_WRITE = 0x0,
> > +	MDIO_READ
> > +};
> > +
> >  struct qca8k_port_tag {
> >  	void (*rw_reg_ack_handler)(struct dsa_port *dp,
> >  				   struct sk_buff *skb);
> >  	void (*mib_autocast_handler)(struct dsa_port *dp,
> >  				     struct sk_buff *skb);
> > +	struct completion rw_done;
> > +	struct mutex mdio_mutex; /* Enforce one mdio read/write at time */
> > +	bool ack;
> > +	u32 seq;
> > +	u32 data[4];
> 
> None of these structures need to stay in the data structure shared with
> the tagger. They can be in qca8k_priv. The tagger should only see the
> function pointers. It doesn't care what is done with the packets.
> 
> >  };

Ok so the handler should access these data by reaching the qca8k_priv
from the dsa port. Correct?

> >  
> >  #endif /* __TAG_QCA_H */
> > -- 
> > 2.32.0
> > 

-- 
	Ansuel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ