[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHCN7x+yOs3icCV2OsKwAPRcov4Cb9Q+K8b2oy7WZowb3YZnRA@mail.gmail.com>
Date: Mon, 13 Dec 2021 21:03:06 -0600
From: Adam Ford <aford173@...il.com>
To: arm-soc <linux-arm-kernel@...ts.infradead.org>
Cc: Adam Ford-BE <aford@...conembedded.com>,
Tim Harvey <tharvey@...eworks.com>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Lucas Stach <l.stach@...gutronix.de>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V4 0/9] arm64: imx8mn: Enable more imx8m Nano functions
On Sun, Nov 28, 2021 at 7:19 AM Adam Ford <aford173@...il.com> wrote:
>
> The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very
> different in others. With the blk-ctrl driver for Mini in place,
> this series expands the blk-ctrl driver to support the Nano which
> opens the door for additional functions in the future. As part of
> this series, it also addresses some issues in the GPCv2 driver and
> finally adds support for enabling USB and GPU.
>
> V4: Rebase on top of [1] which fixes hangs caused from CSI and DSI reset
> and add the same fixes for CSI and DSI to the Nano
> V3: Fixes an the yaml example
> V2: Fixes the clock count in the blk-ctrl
>
> [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html
>
Shawn,
This series should apply cleanly against your tree now that [1] has
been applied to your tree. Should I submit this a resend or are you
able to test the build now?
adam
> Adam Ford (9):
> soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
> soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
> dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
> dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
> soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
> arm64: dts: imx8mn: add GPC node
> arm64: dts: imx8mn: put USB controller into power-domains
> arm64: dts: imx8mn: add DISP blk-ctrl
> arm64: dts: imx8mn: Enable GPU
>
> .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 103 ++++++++++++++++++
> drivers/soc/imx/gpcv2.c | 26 +++++
> drivers/soc/imx/imx8m-blk-ctrl.c | 77 ++++++++++++-
> include/dt-bindings/power/imx8mn-power.h | 5 +
> 5 files changed, 307 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>
> --
> 2.32.0
>
Powered by blists - more mailing lists