| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <001101d7f2f4$119b9570$34d2c050$@samsung.com>
Date: Fri, 17 Dec 2021 12:13:31 +0900
From: "Chanho Park" <chanho61.park@...sung.com>
To: "'Sam Protsenko'" <semen.protsenko@...aro.org>,
"'Krzysztof Kozlowski'" <krzysztof.kozlowski@...onical.com>,
"'Rob Herring'" <robh+dt@...nel.org>,
"'Sylwester Nawrocki'" <s.nawrocki@...sung.com>
Cc: "'Jaewon Kim'" <jaewon02.kim@...sung.com>,
"'David Virag'" <virag.david003@...il.com>,
"'Youngmin Nam'" <youngmin.nam@...sung.com>,
"'Tomasz Figa'" <tomasz.figa@...il.com>,
"'Chanwoo Choi'" <cw00.choi@...sung.com>,
"'Michael Turquette'" <mturquette@...libre.com>,
"'Stephen Boyd'" <sboyd@...nel.org>,
"'Linus Walleij'" <linus.walleij@...aro.org>,
"'Daniel Palmer'" <daniel@...f.com>,
"'Hao Fang'" <fanghao11@...wei.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-samsung-soc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>
Subject: RE: [PATCH 6/7] arm64: dts: exynos: Add initial Exynos850 SoC
support
Hi,
> -----Original Message-----
> From: Sam Protsenko <semen.protsenko@...aro.org>
> Sent: Thursday, December 16, 2021 1:09 AM
> To: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>; Rob Herring
> <robh+dt@...nel.org>; Sylwester Nawrocki <s.nawrocki@...sung.com>
> Cc: Jaewon Kim <jaewon02.kim@...sung.com>; Chanho Park
> <chanho61.park@...sung.com>; David Virag <virag.david003@...il.com>;
> Youngmin Nam <youngmin.nam@...sung.com>; Tomasz Figa
> <tomasz.figa@...il.com>; Chanwoo Choi <cw00.choi@...sung.com>; Michael
> Turquette <mturquette@...libre.com>; Stephen Boyd <sboyd@...nel.org>;
> Linus Walleij <linus.walleij@...aro.org>; Daniel Palmer <daniel@...f.com>;
> Hao Fang <fanghao11@...wei.com>; linux-arm-kernel@...ts.infradead.org;
> linux-samsung-soc@...r.kernel.org; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org; linux-clk@...r.kernel.org
> Subject: [PATCH 6/7] arm64: dts: exynos: Add initial Exynos850 SoC support
>
> Samsung Exynos850 is ARMv8-based mobile-oriented SoC. This patch adds
> initial SoC support. It's not comprehensive yet, some more devices will be
> added later. Right now only crucial system components and most needed
> platform devices are defined.
>
> Crucial features (needed to boot Linux up to shell with serial console):
>
> * Octa cores (Cortex-A55), supporting PSCI v1.0
> * ARM architected timer (armv8-timer)
> * Interrupt controller (GIC-400)
> * Pinctrl nodes for GPIO
> * Serial node
>
> Basic platform features:
>
> * Clock controller CMUs
> * OSCCLK clock
> * RTC clock
> * MCT timer
> * ARM PMU (Performance Monitor Unit)
> * Chip-id
> * RTC
> * Reset
> * Watchdog timers
> * eMMC
> * I2C
> * HSI2C
> * USI
>
> All those features were already enabled and tested on E850-96 board with
> minimal BusyBox rootfs.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@...aro.org>
> ---
> .../boot/dts/exynos/exynos850-pinctrl.dtsi | 755 ++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos850.dtsi | 755 ++++++++++++++++++
> 2 files changed, 1510 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> new file mode 100644
> index 000000000000..ba4e8d3129ac
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> @@ -0,0 +1,755 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (C) 2017 Samsung Electronics Co., Ltd.
> + * Copyright (C) 2021 Linaro Ltd.
> + *
> + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as
> +device
> + * tree nodes in this file.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> +&pinctrl_alive {
> + gpa0: gpa0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpa1: gpa1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpa2: gpa2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpa3: gpa3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpa4: gpa4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpq0: gpq0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + /* I2C5 (also called CAM_PMIC_I2C in TRM) */
> + i2c5_pins: i2c5-pins {
> + samsung,pins = "gpa3-5", "gpa3-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + /* I2C6 (also called MOTOR_I2C in TRM) */
> + i2c6_pins: i2c6-pins {
> + samsung,pins = "gpa3-7", "gpa4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + /* USI: UART_DEBUG_0 pins */
> + uart0_pins: uart0-pins {
> + samsung,pins = "gpq0-0", "gpq0-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI: UART_DEBUG_1 pins */
> + uart1_pins: uart1-pins {
> + samsung,pins = "gpa3-7", "gpa4-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +};
> +
> +&pinctrl_cmgp {
> + gpm0: gpm0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpm1: gpm1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpm2: gpm2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpm3: gpm3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpm4: gpm4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + gpm5: gpm5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* USI_CMGP0: HSI2C function */
> + hsi2c3_pins: hsi2c3-pins {
> + samsung,pins = "gpm0-0", "gpm1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
> + uart1_single_pins: uart1-single-pins {
> + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
> + uart1_dual_pins: uart1-dual-pins {
> + samsung,pins = "gpm0-0", "gpm1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI_CMGP0: SPI function */
> + spi1_pins: spi1-pins {
> + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + spi1_cs_pins: spi1-cs-pins {
> + samsung,pins = "gpm3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + spi1_cs_func_pins: spi1-cs-func-pins {
> + samsung,pins = "gpm3-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + /* USI_CMGP1: HSI2C function */
> + hsi2c4_pins: hsi2c4-pins {
> + samsung,pins = "gpm4-0", "gpm5-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
> + uart2_single_pins: uart2-single-pins {
> + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
> + uart2_dual_pins: uart2-dual-pins {
> + samsung,pins = "gpm4-0", "gpm5-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + /* USI_CMGP1: SPI function */
> + spi2_pins: spi2-pins {
> + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + spi2_cs_pins: spi2-cs-pins {
> + samsung,pins = "gpm7-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +
> + spi2_cs_func_pins: spi2-cs-func-pins {
> + samsung,pins = "gpm7-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> + };
> +};
> +
> +&pinctrl_aud {
> + gpb0: gpb0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb1: gpb1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + aud_codec_mclk_pins: aud-codec-mclk-pins {
> + samsung,pins = "gpb0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins {
> + samsung,pins = "gpb0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_i2s0_pins: aud-i2s0-pins {
> + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_i2s0_idle_pins: aud-i2s0-idle-pins {
> + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_i2s1_pins: aud-i2s1-pins {
> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_i2s1_idle_pins: aud-i2s1-idle-pins {
> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_fm_pins: aud-fm-pins {
> + samsung,pins = "gpb1-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
> + aud_fm_idle_pins: aud-fm-idle-pins {
> + samsung,pins = "gpb1-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +};
> +
> +&pinctrl_hsi {
> + gpf2: gpf2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sd2_clk_pins: sd2-clk-pins {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
> + };
> +
> + sd2_clk_fast_slew_rate_1x_pins: sd2-clk-fast-slew-rate-1x-pins {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV1>;
> + };
> +
> + sd2_clk_fast_slew_rate_1_5x_pins: sd2-clk-fast-slew-rate-1-5x-pins
> {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV1_5>;
> + };
> +
> + sd2_clk_fast_slew_rate_2x_pins: sd2-clk-fast-slew-rate-2x-pins {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
> + };
> +
> + sd2_clk_fast_slew_rate_2_5x_pins: sd2-clk-fast-slew-rate-2-5x-pins
> {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
> + };
> +
> + sd2_clk_fast_slew_rate_3x_pins: sd2-clk-fast-slew-rate-3x-pins {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV3>;
> + };
> +
> + sd2_clk_fast_slew_rate_4x_pins: sd2-clk-fast-slew-rate-4x-pins {
> + samsung,pins = "gpf2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV4>;
> + };
All the flew_rate_XX pins are necessary to be defined? They might be
required by board dts files and it's convenient to use them but I don't
think they should be pre-defined. We can override the sd2_clk_pins like
below in a board dts file.
&sd2_clk_pins {
samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV4>;
Otherwise, looks good to me.
Reviewed-by: Chanho Park <chanho61.park@...sung.com>
Best Regards,
Chanho Park
Powered by blists - more mailing lists