[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211217155512.1877408-4-dario.binacchi@amarulasolutions.com>
Date: Fri, 17 Dec 2021 16:55:11 +0100
From: Dario Binacchi <dario.binacchi@...rulasolutions.com>
To: linux-kernel@...r.kernel.org
Cc: Dario Binacchi <dario.binacchi@...rulasolutions.com>,
Michael Trimarchi <michael@...rulasolutions.com>,
Boris Brezillon <bbrezillon@...nel.org>,
Han Xu <han.xu@....com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
linux-mtd@...ts.infradead.org
Subject: [RFC PATCH 3/4] mtd: rawnand: gpmi: fix controller timings setting
The controller registers are now set accordling to the real clock rate.
Fixes: b1206122069a ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@...rulasolutions.com>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index fd935e893daf..0517b81bb24c 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -648,6 +648,7 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
const struct nand_sdr_timings *sdr)
{
struct gpmi_nfc_hardware_timing *hw = &this->hw;
+ struct resources *r = &this->resources;
unsigned int dll_threshold_ps = this->devdata->max_chain_delay;
unsigned int period_ps, reference_period_ps;
unsigned int data_setup_cycles, data_hold_cycles, addr_setup_cycles;
@@ -671,6 +672,8 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
}
+ hw->clk_rate = clk_round_rate(r->clock[0], hw->clk_rate);
+
/* SDR core timings are given in picoseconds */
period_ps = div_u64((u64)NSEC_PER_SEC * 1000, hw->clk_rate);
--
2.32.0
Powered by blists - more mailing lists