[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211224200935.93817-7-j.neuschaefer@gmx.net>
Date: Fri, 24 Dec 2021 21:09:32 +0100
From: Jonathan Neuschäfer <j.neuschaefer@....net>
To: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>, openbmc@...ts.ozlabs.org,
Tomer Maimon <tmaimon77@...il.com>,
Joel Stanley <joel@....id.au>, linux-kernel@...r.kernel.org,
Andy Shevchenko <andy.shevchenko@...il.com>,
Avi Fishman <avifishman70@...il.com>,
Tali Perry <tali.perry1@...il.com>,
Patrick Venture <venture@...gle.com>,
Nancy Yuen <yuenn@...gle.com>,
Benjamin Fair <benjaminfair@...gle.com>,
Jonathan Neuschäfer <j.neuschaefer@....net>
Subject: [PATCH v3 6/9] ARM: dts: wpcm450: Add pinctrl and GPIO nodes
This patch adds the pin controller and GPIO banks to the devicetree for the
WPCM450 SoC.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@....net>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
---
v3:
- Add Linus' R-b tag
- Remove nuvoton,interrupt-map again, to simplify the binding
- Make tuples clearer
v2:
- https://lore.kernel.org/lkml/20211207210823.1975632-7-j.neuschaefer@gmx.net/
- Move GPIO banks into subnodes
- Add /alias/gpio*
v1:
- https://lore.kernel.org/lkml/20210602120329.2444672-7-j.neuschaefer@gmx.net/
---
arch/arm/boot/dts/nuvoton-wpcm450.dtsi | 72 ++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index a17ee70085dd0..66c35626c80a6 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -8,6 +8,17 @@ / {
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -77,5 +88,66 @@ aic: interrupt-controller@...02000 {
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pinctrl: pinctrl@...03000 {
+ compatible = "nuvoton,wpcm450-pinctrl";
+ reg = <0xb8003000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio0: gpio@0 {
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@1 {
+ reg = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@2 {
+ reg = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio3: gpio@3 {
+ reg = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio4: gpio@4 {
+ reg = <4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio5: gpio@5 {
+ reg = <5>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio6: gpio@6 {
+ reg = <6>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio7: gpio@7 {
+ reg = <7>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
};
};
--
2.30.2
Powered by blists - more mailing lists