linux-kernel - [PATCH v3 9/9] ARM: dts: wpcm450: Add pinmux information to UART0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211224200935.93817-10-j.neuschaefer@gmx.net>
Date:   Fri, 24 Dec 2021 21:09:35 +0100
From:   Jonathan Neuschäfer <j.neuschaefer@....net>
To:     linux-gpio@...r.kernel.org, devicetree@...r.kernel.org
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, openbmc@...ts.ozlabs.org,
        Tomer Maimon <tmaimon77@...il.com>,
        Joel Stanley <joel@....id.au>, linux-kernel@...r.kernel.org,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Avi Fishman <avifishman70@...il.com>,
        Tali Perry <tali.perry1@...il.com>,
        Patrick Venture <venture@...gle.com>,
        Nancy Yuen <yuenn@...gle.com>,
        Benjamin Fair <benjaminfair@...gle.com>,
        Jonathan Neuschäfer <j.neuschaefer@....net>
Subject: [PATCH v3 9/9] ARM: dts: wpcm450: Add pinmux information to UART0

UART0 always uses the same pins, so lets add the pinctrl information to
the common devicetree for WPCM450.

UART1 has different connection options, so I'm not adding the pinctrl
properties there.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@....net>
---

v3:
- New patch
---
 arch/arm/boot/dts/nuvoton-wpcm450.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index 0c547bd88bdbd..93595850a4c3c 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -55,6 +55,8 @@ serial0: serial@...00000 {
 			reg-shift = <2>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
 			status = "disabled";
 		};

--
2.30.2