linux-kernel - [PATCH 4/4] extcon: int3496: Add support for controlling Vbus through a regulator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211228170141.520902-4-hdegoede@redhat.com>
Date:   Tue, 28 Dec 2021 18:01:41 +0100
From:   Hans de Goede <hdegoede@...hat.com>
To:     MyungJoo Ham <myungjoo.ham@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>
Cc:     Hans de Goede <hdegoede@...hat.com>,
        Stephan Gerhold <stephan@...hold.net>,
        linux-kernel@...r.kernel.org
Subject: [PATCH 4/4] extcon: int3496: Add support for controlling Vbus through a regulator

On some boards the 5V vboost-regulator for powering devices connected to
the micro USB connector is not controlled through a GPIO. This happens
for example when the 5V vboost-regulator is integrated into the charger IC
and controlled over I2C.

Add support for controlling the 5V vboost-regulator through the regulator
framework for such boards.

Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
 drivers/extcon/extcon-intel-int3496.c | 30 ++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index 0830076d8c05..ded1a85a5549 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #define INT3496_GPIO_USB_ID	0
 #define INT3496_GPIO_VBUS_EN	1
@@ -30,7 +31,9 @@ struct int3496_data {
 	struct gpio_desc *gpio_usb_id;
 	struct gpio_desc *gpio_vbus_en;
 	struct gpio_desc *gpio_usb_mux;
+	struct regulator *vbus_boost;
 	int usb_id_irq;
+	bool vbus_boost_enabled;
 };
 
 static const unsigned int int3496_cable[] = {
@@ -53,6 +56,27 @@ static const struct acpi_gpio_mapping acpi_int3496_default_gpios[] = {
 	{ },
 };
 
+static void int3496_set_vbus_boost(struct int3496_data *data, bool enable)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(data->vbus_boost))
+		return;
+
+	if (data->vbus_boost_enabled == enable)
+		return;
+
+	if (enable)
+		ret = regulator_enable(data->vbus_boost);
+	else
+		ret = regulator_disable(data->vbus_boost);
+
+	if (ret == 0)
+		data->vbus_boost_enabled = enable;
+	else
+		dev_err(data->dev, "Error updating Vbus boost regulator: %d\n", ret);
+}
+
 static void int3496_do_usb_id(struct work_struct *work)
 {
 	struct int3496_data *data =
@@ -71,6 +95,8 @@ static void int3496_do_usb_id(struct work_struct *work)
 
 	if (!IS_ERR(data->gpio_vbus_en))
 		gpiod_direction_output(data->gpio_vbus_en, !id);
+	else
+		int3496_set_vbus_boost(data, !id);
 
 	extcon_set_state_sync(data->edev, EXTCON_USB_HOST, !id);
 }
@@ -123,8 +149,10 @@ static int int3496_probe(struct platform_device *pdev)
 	}
 
 	data->gpio_vbus_en = devm_gpiod_get(dev, "vbus", GPIOD_ASIS);
-	if (IS_ERR(data->gpio_vbus_en))
+	if (IS_ERR(data->gpio_vbus_en)) {
 		dev_dbg(dev, "can't request VBUS EN GPIO\n");
+		data->vbus_boost = devm_regulator_get_optional(dev, "vbus");
+	}
 
 	data->gpio_usb_mux = devm_gpiod_get(dev, "mux", GPIOD_ASIS);
 	if (IS_ERR(data->gpio_usb_mux))
-- 
2.33.1