linux-kernel - [PATCH v1 pinctrl-next 0/1] add blink and activity functions to SGPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211229003729.618079-1-colin.foster@in-advantage.com>
Date:   Tue, 28 Dec 2021 16:37:28 -0800
From:   Colin Foster <colin.foster@...advantage.com>
To:     linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        UNGLinuxDriver@...rochip.com,
        Steen Hegelund <Steen.Hegelund@...rochip.com>,
        Lars Povlsen <lars.povlsen@...rochip.com>
Subject: [PATCH v1 pinctrl-next 0/1] add blink and activity functions to SGPIO

Expose a debugfs / devicetree interface for Microsemi SGPIO controllers.
By writing values of 2-5, the SGPIO pins can be configured for either
automatic blinking or activity.

The implementation is modeled after the code in
/drivers/pinctrl/pinctrl-ocelot.c.

I have only tested this with currently out-of-tree patches for the
VSC7512 that I hope to get in soon. They are not needed for VSC7513 /
VSC7514, SPARX5, or LUTON - but I don't have any hardware to test.

Of note: the 7512 chip has a discrepancy between the datasheet and the
registers. The datahseet claims 20Hz blink default frequency, the
registers claim 5 Hz default frequency for BMODE_0. I override the
OCELOT registers to correct for this. I don't know if that is needed for
LUTON or SPARX, but having two blink modes at the same frequency isn't
beneficial. As such, I make the blink modes match the 5Hz / 20Hz for the
two modes.

Tested with VSC7512 by way of:
echo SGPIO_O_p1b0 {blink0,blink1,activity0,activity1} > 
/sys/kernel/debug/pinctrl/pinctrl-sgpio-pinctrl-sgpio-output/pinmux-select

LEDs blink!

Colin Foster (1):
  pinctrl: microchip-sgpio: add activity and blink functionality

 drivers/pinctrl/pinctrl-microchip-sgpio.c | 135 +++++++++++++++++++++-
 1 file changed, 130 insertions(+), 5 deletions(-)

-- 
2.25.1