| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211229003729.618079-2-colin.foster@in-advantage.com>
Date: Tue, 28 Dec 2021 16:37:29 -0800
From: Colin Foster <colin.foster@...advantage.com>
To: linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
UNGLinuxDriver@...rochip.com,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Lars Povlsen <lars.povlsen@...rochip.com>
Subject: [PATCH v1 pinctrl-next 1/1] pinctrl: microchip-sgpio: add activity and blink functionality
Add additional functions - two blink and two activity, for each SGPIO
output.
Signed-off-by: Colin Foster <colin.foster@...advantage.com>
---
drivers/pinctrl/pinctrl-microchip-sgpio.c | 135 +++++++++++++++++++++-
1 file changed, 130 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 8e081c90bdb2..e3230e5dedc0 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -51,6 +51,15 @@ enum {
SGPIO_FLAGS_HAS_IRQ = BIT(0),
};
+enum {
+ FUNC_GPIO,
+ FUNC_BLINK0,
+ FUNC_BLINK1,
+ FUNC_ACTIVITY0,
+ FUNC_ACTIVITY1,
+ FUNC_MAX,
+};
+
struct sgpio_properties {
int arch;
int flags;
@@ -60,16 +69,22 @@ struct sgpio_properties {
#define SGPIO_LUTON_AUTO_REPEAT BIT(5)
#define SGPIO_LUTON_PORT_WIDTH GENMASK(3, 2)
#define SGPIO_LUTON_CLK_FREQ GENMASK(11, 0)
+#define SGPIO_LUTON_SIO_BMODE_0 GENMASK(21, 20)
+#define SGPIO_LUTON_SIO_BMODE_1 GENMASK(19, 18)
#define SGPIO_LUTON_BIT_SOURCE GENMASK(11, 0)
#define SGPIO_OCELOT_AUTO_REPEAT BIT(10)
#define SGPIO_OCELOT_PORT_WIDTH GENMASK(8, 7)
#define SGPIO_OCELOT_CLK_FREQ GENMASK(19, 8)
+#define SGPIO_OCELOT_SIO_BMODE_0 GENMASK(20, 19)
+#define SGPIO_OCELOT_SIO_BMODE_1 GENMASK(22, 21)
#define SGPIO_OCELOT_BIT_SOURCE GENMASK(23, 12)
#define SGPIO_SPARX5_AUTO_REPEAT BIT(6)
#define SGPIO_SPARX5_PORT_WIDTH GENMASK(4, 3)
#define SGPIO_SPARX5_CLK_FREQ GENMASK(19, 8)
+#define SGPIO_SPARX5_SIO_BMODE_0 GENMASK(16, 15)
+#define SGPIO_SPARX5_SIO_BMODE_1 GENMASK(18, 17)
#define SGPIO_SPARX5_BIT_SOURCE GENMASK(23, 12)
#define SGPIO_MASTER_INTR_ENA BIT(0)
@@ -98,22 +113,46 @@ static const struct sgpio_properties properties_sparx5 = {
.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05, 0x2a, 0x32, 0x3a, 0x3e, 0x42 },
};
-static const char * const functions[] = { "gpio" };
+static const char * const function_names[] = {
+ [FUNC_GPIO] = "gpio",
+ [FUNC_BLINK0] = "blink0",
+ [FUNC_BLINK1] = "blink1",
+ [FUNC_ACTIVITY0] = "activity0",
+ [FUNC_ACTIVITY1] = "activity1",
+};
+
+static const int function_values[] = {
+ [FUNC_GPIO] = 0,
+ [FUNC_BLINK0] = 2,
+ [FUNC_BLINK1] = 3,
+ [FUNC_ACTIVITY0] = 4,
+ [FUNC_ACTIVITY1] = 5,
+};
+
+struct sgpio_pmx_func {
+ const char **groups;
+ unsigned int ngroups;
+};
struct sgpio_bank {
struct sgpio_priv *priv;
bool is_input;
struct gpio_chip gpio;
struct pinctrl_desc pctl_desc;
+ struct sgpio_pmx_func func[FUNC_MAX];
+ struct pinctrl_pin_desc *pins;
};
struct sgpio_priv {
struct device *dev;
struct sgpio_bank in;
struct sgpio_bank out;
+ int ngpios;
u32 bitcount;
u32 ports;
u32 clock;
+ u32 bmode0;
+ u32 bmode1;
struct regmap *regs;
const struct sgpio_properties *properties;
};
@@ -223,6 +262,32 @@ static inline void sgpio_configure_clock(struct sgpio_priv *priv, u32 clkfrq)
sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, clr, set);
}
+static inline void sgpio_configure_blink_modes(struct sgpio_priv *priv)
+{
+ u32 clr, set;
+
+ switch (priv->properties->arch) {
+ case SGPIO_ARCH_LUTON:
+ clr = SGPIO_LUTON_SIO_BMODE_0 | SGPIO_LUTON_SIO_BMODE_1;
+ set = FIELD_PREP(SGPIO_LUTON_SIO_BMODE_0, priv->bmode0) |
+ FIELD_PREP(SGPIO_LUTON_SIO_BMODE_1, priv->bmode1);
+ break;
+ case SGPIO_ARCH_OCELOT:
+ clr = SGPIO_OCELOT_SIO_BMODE_0 | SGPIO_OCELOT_SIO_BMODE_1;
+ set = FIELD_PREP(SGPIO_OCELOT_SIO_BMODE_0, priv->bmode0) |
+ FIELD_PREP(SGPIO_OCELOT_SIO_BMODE_1, priv->bmode1);
+ break;
+ case SGPIO_ARCH_SPARX5:
+ clr = SGPIO_SPARX5_SIO_BMODE_0 | SGPIO_SPARX5_SIO_BMODE_1;
+ set = FIELD_PREP(SGPIO_SPARX5_SIO_BMODE_0, priv->bmode0) |
+ FIELD_PREP(SGPIO_SPARX5_SIO_BMODE_1, priv->bmode1);
+ break;
+ default:
+ return;
+ }
+ sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, clr, set);
+}
+
static void sgpio_output_set(struct sgpio_priv *priv,
struct sgpio_port_addr *addr,
int value)
@@ -352,13 +417,18 @@ static const struct pinconf_ops sgpio_confops = {
static int sgpio_get_functions_count(struct pinctrl_dev *pctldev)
{
- return 1;
+ struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+
+ if (bank->is_input)
+ return 1;
+ else
+ return ARRAY_SIZE(function_names);
}
static const char *sgpio_get_function_name(struct pinctrl_dev *pctldev,
unsigned int function)
{
- return functions[0];
+ return function_names[function];
}
static int sgpio_get_function_groups(struct pinctrl_dev *pctldev,
@@ -366,8 +436,10 @@ static int sgpio_get_function_groups(struct pinctrl_dev *pctldev,
const char *const **groups,
unsigned *const num_groups)
{
- *groups = functions;
- *num_groups = ARRAY_SIZE(functions);
+ struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = bank->func[function].groups;
+ *num_groups = bank->func[function].ngroups;
return 0;
}
@@ -375,6 +447,15 @@ static int sgpio_get_function_groups(struct pinctrl_dev *pctldev,
static int sgpio_pinmux_set_mux(struct pinctrl_dev *pctldev,
unsigned int selector, unsigned int group)
{
+ struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+ struct sgpio_priv *priv = bank->priv;
+ struct sgpio_port_addr addr;
+ int f;
+
+ f = function_values[selector];
+ sgpio_pin_to_addr(priv, group, &addr);
+ sgpio_output_set(priv, &addr, f);
+
return 0;
}
@@ -693,6 +774,30 @@ static void sgpio_irq_handler(struct irq_desc *desc)
}
}
+static int sgpio_create_group_func_map(struct device *dev,
+ struct sgpio_bank *bank)
+{
+ struct sgpio_priv *priv = bank->priv;
+ int f, i;
+
+ if (bank->is_input)
+ return 0;
+
+ for (f = 0; f < FUNC_MAX; f++) {
+ bank->func[f].ngroups = priv->ngpios;
+ bank->func[f].groups = devm_kcalloc(dev, priv->ngpios,
+ sizeof(char *), GFP_KERNEL);
+
+ if (!bank->func[f].groups)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->ngpios; i++)
+ bank->func[f].groups[i] = bank->pins[i].name;
+ }
+
+ return 0;
+}
+
static int microchip_sgpio_register_bank(struct device *dev,
struct sgpio_priv *priv,
struct fwnode_handle *fwnode,
@@ -716,6 +821,7 @@ static int microchip_sgpio_register_bank(struct device *dev,
ngpios = 64;
}
+ priv->ngpios = ngpios;
priv->bitcount = ngpios / SGPIO_BITS_PER_WORD;
if (priv->bitcount > SGPIO_MAX_BITS) {
dev_err(dev, "Bit width exceeds maximum (%d)\n",
@@ -738,6 +844,7 @@ static int microchip_sgpio_register_bank(struct device *dev,
pctl_desc->npins = ngpios;
pctl_desc->pins = pins;
+ bank->pins = pins;
for (i = 0; i < ngpios; i++) {
struct sgpio_port_addr addr;
@@ -753,6 +860,12 @@ static int microchip_sgpio_register_bank(struct device *dev,
return -ENOMEM;
}
+ ret = sgpio_create_group_func_map(dev, bank);
+ if (ret) {
+ dev_err(dev, "Unable to create group func map.\n");
+ return ret;
+ }
+
pctldev = devm_pinctrl_register(dev, pctl_desc, bank);
if (IS_ERR(pctldev))
return dev_err_probe(dev, PTR_ERR(pctldev), "Failed to register pinctrl\n");
@@ -895,6 +1008,18 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
sgpio_writel(priv, 0, REG_PORT_CONFIG, port);
sgpio_writel(priv, priv->ports, REG_PORT_ENABLE, 0);
+ /*
+ * The datasheet and register definitions contradict themselves, at
+ * least for the VSC7512. The Datasheet Revision 4.2 describes both
+ * default blink modes as 20 Hz, but the registers show the default
+ * blink mode 0 as 5 Hz. Two identical blink modes aren't very useful,
+ * so override BMODE_0 here to match the 5Hz "default" described in the
+ * register map.
+ */
+ if (priv->properties->arch == SGPIO_ARCH_OCELOT)
+ priv->bmode0 = 2;
+ sgpio_configure_blink_modes(priv);
+
return 0;
}
--
2.25.1
Powered by blists - more mailing lists