linux-kernel - Re: [PATCH 1/2] ath10k: search for default BDF name provided in DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAD=FV=W5fHP8K-PcoYWxYHiDWnPUVQQzOzw=REbuJSSqGeVVfg@mail.gmail.com>
Date:   Fri, 7 Jan 2022 13:22:45 -0800
From:   Doug Anderson <dianders@...omium.org>
To:     Abhishek Kumar <kuabhs@...omium.org>
Cc:     Kalle Valo <kvalo@...eaurora.org>,
        Rakesh Pillai <pillair@...eaurora.org>,
        LKML <linux-kernel@...r.kernel.org>,
        linux-wireless <linux-wireless@...r.kernel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Kalle Valo <kvalo@...nel.org>,
        ath10k <ath10k@...ts.infradead.org>,
        netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH 1/2] ath10k: search for default BDF name provided in DT

Hi,

On Fri, Jan 7, 2022 at 12:05 PM Abhishek Kumar <kuabhs@...omium.org> wrote:
>
> There can be cases where the board-2.bin does not contain
> any BDF matching the chip-id+board-id+variant combination.
> This causes the wlan probe to fail and renders wifi unusable.
> For e.g. if the board-2.bin has default BDF as:
> bus=snoc,qmi-board-id=67 but for some reason the board-id
> on the wlan chip is not programmed and read 0xff as the
> default value. In such cases there won't be any matching BDF
> because the board-2.bin will be searched with following:
> bus=snoc,qmi-board-id=ff
> To address these scenarios, there can be an option to provide
> fallback default BDF name in the device tree. If none of the
> BDF names match then the board-2.bin file can be searched with
> default BDF names assigned in the device tree.
>
> The default BDF name can be set as:
> wifi@...0000 {
>         status = "okay";
>         qcom,ath10k-default-bdf = "bus=snoc,qmi-board-id=67";

Rather than add a new device tree property, wouldn't it be good enough
to leverage the existing variant? Right now I think that the board
file contains:

'bus=snoc,qmi-board-id=67.bin'
'bus=snoc,qmi-board-id=67,qmi-chip-id=320,variant=GO_LAZOR.bin'
'bus=snoc,qmi-board-id=67,qmi-chip-id=320,variant=GO_POMPOM.bin'
'bus=snoc,qmi-board-id=67,qmi-chip-id=4320,variant=GO_LAZOR.bin'
'bus=snoc,qmi-board-id=67,qmi-chip-id=4320,variant=GO_POMPOM.bin'

...and, on lazor for instance, we have:

qcom,ath10k-calibration-variant = "GO_LAZOR";

The problem you're trying to solve is that on some early lazor
prototype hardware we didn't have the "board-id" programmed we could
get back 0xff from the hardware. As I understand it 0xff always means
"unprogrammed".

It feels like you could just have a special case such that if the
hardware reports board ID of 0xff and you don't get a "match" that you
could just treat 0xff as a wildcard. That means that you'd see the
"variant" in the device tree and pick one of the "GO_LAZOR" entries.

Anyway, I guess it's up to the people who spend more time in this file
which they'd prefer, but that seems like it'd be simple and wouldn't
require a bindings addition...

-Doug