| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 10 Jan 2022 15:12:05 -0800
From: Tim Harvey <tharvey@...eworks.com>
To: Martin Schiller <ms@....tdt.de>
Cc: Hauke Mehrtens <hauke@...ke-m.de>,
martin.blumenstingl@...glemail.com,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>, hkallweit1@...il.com,
Russell King - ARM Linux <linux@...linux.org.uk>,
David Miller <davem@...emloft.net>, kuba@...nel.org,
netdev <netdev@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next v6] net: phy: intel-xway: Add RGMII internal
delay configuration
On Mon, Jul 19, 2021 at 2:07 AM Martin Schiller <ms@....tdt.de> wrote:
>
> This adds the possibility to configure the RGMII RX/TX clock skew via
> devicetree.
>
> Simply set phy mode to "rgmii-id", "rgmii-rxid" or "rgmii-txid" and add
> the "rx-internal-delay-ps" or "tx-internal-delay-ps" property to the
> devicetree.
>
> Furthermore, a warning is now issued if the phy mode is configured to
> "rgmii" and an internal delay is set in the phy (e.g. by pin-strapping),
> as in the dp83867 driver.
>
> Signed-off-by: Martin Schiller <ms@....tdt.de>
> ---
>
> Changes to v5:
> o remove #if IS_ENABLED(CONFIG_OF_MDIO) check
> o rename new function to xway_gphy_rgmii_init()
>
> Changes to v4:
> o Fix Alignment to match open parenthesis
>
> Changes to v3:
> o Fix typo in commit message
> o use FIELD_PREP() and FIELD_GET() macros
> o further code cleanups
> o always mask rxskew AND txskew value in the register value
>
> Changes to v2:
> o Fix missing whitespace in warning.
>
> Changes to v1:
> o code cleanup and use phy_modify().
> o use default of 2.0ns if delay property is absent instead of returning
> an error.
>
> ---
> drivers/net/phy/intel-xway.c | 78 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
>
> diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
> index d453ec016168..fd7da2eeb963 100644
> --- a/drivers/net/phy/intel-xway.c
> +++ b/drivers/net/phy/intel-xway.c
> @@ -8,11 +8,16 @@
> #include <linux/module.h>
> #include <linux/phy.h>
> #include <linux/of.h>
> +#include <linux/bitfield.h>
>
> +#define XWAY_MDIO_MIICTRL 0x17 /* mii control */
> #define XWAY_MDIO_IMASK 0x19 /* interrupt mask */
> #define XWAY_MDIO_ISTAT 0x1A /* interrupt status */
> #define XWAY_MDIO_LED 0x1B /* led control */
>
> +#define XWAY_MDIO_MIICTRL_RXSKEW_MASK GENMASK(14, 12)
> +#define XWAY_MDIO_MIICTRL_TXSKEW_MASK GENMASK(10, 8)
> +
> /* bit 15:12 are reserved */
> #define XWAY_MDIO_LED_LED3_EN BIT(11) /* Enable the integrated function of LED3 */
> #define XWAY_MDIO_LED_LED2_EN BIT(10) /* Enable the integrated function of LED2 */
> @@ -157,6 +162,75 @@
> #define PHY_ID_PHY11G_VR9_1_2 0xD565A409
> #define PHY_ID_PHY22F_VR9_1_2 0xD565A419
>
> +static const int xway_internal_delay[] = {0, 500, 1000, 1500, 2000, 2500,
> + 3000, 3500};
> +
> +static int xway_gphy_rgmii_init(struct phy_device *phydev)
> +{
> + struct device *dev = &phydev->mdio.dev;
> + unsigned int delay_size = ARRAY_SIZE(xway_internal_delay);
> + s32 int_delay;
> + int val = 0;
> +
> + if (!phy_interface_is_rgmii(phydev))
> + return 0;
> +
> + /* Existing behavior was to use default pin strapping delay in rgmii
> + * mode, but rgmii should have meant no delay. Warn existing users,
> + * but do not change anything at the moment.
> + */
> + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
> + u16 txskew, rxskew;
> +
> + val = phy_read(phydev, XWAY_MDIO_MIICTRL);
> + if (val < 0)
> + return val;
> +
> + txskew = FIELD_GET(XWAY_MDIO_MIICTRL_TXSKEW_MASK, val);
> + rxskew = FIELD_GET(XWAY_MDIO_MIICTRL_RXSKEW_MASK, val);
> +
> + if (txskew > 0 || rxskew > 0)
> + phydev_warn(phydev,
> + "PHY has delays (e.g. via pin strapping), but phy-mode = 'rgmii'\n"
> + "Should be 'rgmii-id' to use internal delays txskew:%d ps rxskew:%d ps\n",
> + xway_internal_delay[txskew],
> + xway_internal_delay[rxskew]);
> + return 0;
> + }
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
> + phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
> + int_delay = phy_get_internal_delay(phydev, dev,
> + xway_internal_delay,
> + delay_size, true);
> +
> + if (int_delay < 0) {
> + phydev_warn(phydev, "rx-internal-delay-ps is missing, use default of 2.0 ns\n");
> + int_delay = 4; /* 2000 ps */
> + }
> +
> + val |= FIELD_PREP(XWAY_MDIO_MIICTRL_RXSKEW_MASK, int_delay);
> + }
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
> + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
> + int_delay = phy_get_internal_delay(phydev, dev,
> + xway_internal_delay,
> + delay_size, false);
> +
> + if (int_delay < 0) {
> + phydev_warn(phydev, "tx-internal-delay-ps is missing, use default of 2.0 ns\n");
> + int_delay = 4; /* 2000 ps */
> + }
> +
> + val |= FIELD_PREP(XWAY_MDIO_MIICTRL_TXSKEW_MASK, int_delay);
> + }
> +
> + return phy_modify(phydev, XWAY_MDIO_MIICTRL,
> + XWAY_MDIO_MIICTRL_RXSKEW_MASK |
> + XWAY_MDIO_MIICTRL_TXSKEW_MASK, val);
> +}
> +
> static int xway_gphy_config_init(struct phy_device *phydev)
> {
> int err;
> @@ -204,6 +278,10 @@ static int xway_gphy_config_init(struct phy_device *phydev)
> phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
> phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
>
> + err = xway_gphy_rgmii_init(phydev);
> + if (err)
> + return err;
> +
> return 0;
> }
>
> --
> 2.20.1
>
Martin,
I've got some boards with the GPY111 phy on them and I'm finding that
modifying XWAY_MDIO_MIICTRL to change the skew has no effect unless I
do a soft reset (BCMR_RESET) first. I don't see anything in the
datasheet which specifies this to be the case so I'm interested it
what you have found. Are you sure adjusting the skews like this
without a soft (or hard pin based) reset actually works?
Best regards,
Tim
Powered by blists - more mailing lists