Message-ID: <CAAhSdy1At5nT1L5WMRBLM56qmerexVyhv3Y80mf38tB6x=BbbQ@mail.gmail.com>
Date:   Mon, 17 Jan 2022 21:46:35 +0530
From:   Anup Patel <anup@...infault.org>
To:     Atish Patra <atishp@...shpatra.org>
Cc:     "linux-kernel@...r.kernel.org List" <linux-kernel@...r.kernel.org>,
        Atish Patra <atishp@...osinc.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Damien Le Moal <damien.lemoal@....com>,
        DTML <devicetree@...r.kernel.org>,
        Jisheng Zhang <jszhang@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
        linux-riscv <linux-riscv@...ts.infradead.org>,
        Palmer Dabbelt <palmer@...belt.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Rob Herring <robh+dt@...nel.org>
Subject: Re: [v5 8/9] Documentation: riscv: Remove the old documentation

On Sat, Dec 25, 2021 at 11:17 AM Atish Patra <atishp@...shpatra.org> wrote:
>
> From: Atish Patra <atish.patra@....com>
>
> The existing pmu documentation describes the limitation of perf
> infrastructure in RISC-V ISA and limited feature set of perf in RISC-V.
>
> However, SBI PMU extension and sscofpmf extension(ISA extension) allows to
> implement most of the required features of perf. Remove the old
> documentation which is not accurate anymore.
>
> Signed-off-by: Atish Patra <atish.patra@....com>
> Signed-off-by: Atish Patra <atishp@...osinc.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@...infault.org>

Regards,
Anup

> ---
>  Documentation/riscv/pmu.rst | 255 ------------------------------------
>  1 file changed, 255 deletions(-)
>  delete mode 100644 Documentation/riscv/pmu.rst
>
> diff --git a/Documentation/riscv/pmu.rst b/Documentation/riscv/pmu.rst
> deleted file mode 100644
> index acb216b99c26..000000000000
> --- a/Documentation/riscv/pmu.rst
> +++ /dev/null
> @@ -1,255 +0,0 @@
> -===================================
> -Supporting PMUs on RISC-V platforms
> -===================================
> -
> -Alan Kao <alankao@...estech.com>, Mar 2018
> -
> -Introduction
> -------------
> -
> -As of this writing, perf_event-related features mentioned in The RISC-V ISA
> -Privileged Version 1.10 are as follows:
> -(please check the manual for more details)
> -
> -* [m|s]counteren
> -* mcycle[h], cycle[h]
> -* minstret[h], instret[h]
> -* mhpeventx, mhpcounterx[h]
> -
> -With such function set only, porting perf would require a lot of work, due to
> -the lack of the following general architectural performance monitoring features:
> -
> -* Enabling/Disabling counters
> -  Counters are just free-running all the time in our case.
> -* Interrupt caused by counter overflow
> -  No such feature in the spec.
> -* Interrupt indicator
> -  It is not possible to have many interrupt ports for all counters, so an
> -  interrupt indicator is required for software to tell which counter has
> -  just overflowed.
> -* Writing to counters
> -  There will be an SBI to support this since the kernel cannot modify the
> -  counters [1].  Alternatively, some vendor considers to implement
> -  hardware-extension for M-S-U model machines to write counters directly.
> -
> -This document aims to provide developers a quick guide on supporting their
> -PMUs in the kernel.  The following sections briefly explain perf' mechanism
> -and todos.
> -
> -You may check previous discussions here [1][2].  Also, it might be helpful
> -to check the appendix for related kernel structures.
> -
> -
> -1. Initialization
> ------------------
> -
> -*riscv_pmu* is a global pointer of type *struct riscv_pmu*, which contains
> -various methods according to perf's internal convention and PMU-specific
> -parameters.  One should declare such instance to represent the PMU.  By default,
> -*riscv_pmu* points to a constant structure *riscv_base_pmu*, which has very
> -basic support to a baseline QEMU model.
> -
> -Then he/she can either assign the instance's pointer to *riscv_pmu* so that
> -the minimal and already-implemented logic can be leveraged, or invent his/her
> -own *riscv_init_platform_pmu* implementation.
> -
> -In other words, existing sources of *riscv_base_pmu* merely provide a
> -reference implementation.  Developers can flexibly decide how many parts they
> -can leverage, and in the most extreme case, they can customize every function
> -according to their needs.
> -
> -
> -2. Event Initialization
> ------------------------
> -
> -When a user launches a perf command to monitor some events, it is first
> -interpreted by the userspace perf tool into multiple *perf_event_open*
> -system calls, and then each of them calls to the body of *event_init*
> -member function that was assigned in the previous step.  In *riscv_base_pmu*'s
> -case, it is *riscv_event_init*.
> -
> -The main purpose of this function is to translate the event provided by user
> -into bitmap, so that HW-related control registers or counters can directly be
> -manipulated.  The translation is based on the mappings and methods provided in
> -*riscv_pmu*.
> -
> -Note that some features can be done in this stage as well:
> -
> -(1) interrupt setting, which is stated in the next section;
> -(2) privilege level setting (user space only, kernel space only, both);
> -(3) destructor setting.  Normally it is sufficient to apply *riscv_destroy_event*;
> -(4) tweaks for non-sampling events, which will be utilized by functions such as
> -    *perf_adjust_period*, usually something like the follows::
> -
> -      if (!is_sampling_event(event)) {
> -              hwc->sample_period = x86_pmu.max_period;
> -              hwc->last_period = hwc->sample_period;
> -              local64_set(&hwc->period_left, hwc->sample_period);
> -      }
> -
> -In the case of *riscv_base_pmu*, only (3) is provided for now.
> -
> -
> -3. Interrupt
> -------------
> -
> -3.1. Interrupt Initialization
> -
> -This often occurs at the beginning of the *event_init* method. In common
> -practice, this should be a code segment like::
> -
> -  int x86_reserve_hardware(void)
> -  {
> -        int err = 0;
> -
> -        if (!atomic_inc_not_zero(&pmc_refcount)) {
> -                mutex_lock(&pmc_reserve_mutex);
> -                if (atomic_read(&pmc_refcount) == 0) {
> -                        if (!reserve_pmc_hardware())
> -                                err = -EBUSY;
> -                        else
> -                                reserve_ds_buffers();
> -                }
> -                if (!err)
> -                        atomic_inc(&pmc_refcount);
> -                mutex_unlock(&pmc_reserve_mutex);
> -        }
> -
> -        return err;
> -  }
> -
> -And the magic is in *reserve_pmc_hardware*, which usually does atomic
> -operations to make implemented IRQ accessible from some global function pointer.
> -*release_pmc_hardware* serves the opposite purpose, and it is used in event
> -destructors mentioned in previous section.
> -
> -(Note: From the implementations in all the architectures, the *reserve/release*
> -pair are always IRQ settings, so the *pmc_hardware* seems somehow misleading.
> -It does NOT deal with the binding between an event and a physical counter,
> -which will be introduced in the next section.)
> -
> -3.2. IRQ Structure
> -
> -Basically, a IRQ runs the following pseudo code::
> -
> -  for each hardware counter that triggered this overflow
> -
> -      get the event of this counter
> -
> -      // following two steps are defined as *read()*,
> -      // check the section Reading/Writing Counters for details.
> -      count the delta value since previous interrupt
> -      update the event->count (# event occurs) by adding delta, and
> -                 event->hw.period_left by subtracting delta
> -
> -      if the event overflows
> -          sample data
> -          set the counter appropriately for the next overflow
> -
> -          if the event overflows again
> -              too frequently, throttle this event
> -          fi
> -      fi
> -
> -  end for
> -
> -However as of this writing, none of the RISC-V implementations have designed an
> -interrupt for perf, so the details are to be completed in the future.
> -
> -4. Reading/Writing Counters
> ----------------------------
> -
> -They seem symmetric but perf treats them quite differently.  For reading, there
> -is a *read* interface in *struct pmu*, but it serves more than just reading.
> -According to the context, the *read* function not only reads the content of the
> -counter (event->count), but also updates the left period to the next interrupt
> -(event->hw.period_left).
> -
> -But the core of perf does not need direct write to counters.  Writing counters
> -is hidden behind the abstraction of 1) *pmu->start*, literally start counting so one
> -has to set the counter to a good value for the next interrupt; 2) inside the IRQ
> -it should set the counter to the same resonable value.
> -
> -Reading is not a problem in RISC-V but writing would need some effort, since
> -counters are not allowed to be written by S-mode.
> -
> -
> -5. add()/del()/start()/stop()
> ------------------------------
> -
> -Basic idea: add()/del() adds/deletes events to/from a PMU, and start()/stop()
> -starts/stop the counter of some event in the PMU.  All of them take the same
> -arguments: *struct perf_event *event* and *int flag*.
> -
> -Consider perf as a state machine, then you will find that these functions serve
> -as the state transition process between those states.
> -Three states (event->hw.state) are defined:
> -
> -* PERF_HES_STOPPED:    the counter is stopped
> -* PERF_HES_UPTODATE:   the event->count is up-to-date
> -* PERF_HES_ARCH:       arch-dependent usage ... we don't need this for now
> -
> -A normal flow of these state transitions are as follows:
> -
> -* A user launches a perf event, resulting in calling to *event_init*.
> -* When being context-switched in, *add* is called by the perf core, with a flag
> -  PERF_EF_START, which means that the event should be started after it is added.
> -  At this stage, a general event is bound to a physical counter, if any.
> -  The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, because it is now
> -  stopped, and the (software) event count does not need updating.
> -
> -  - *start* is then called, and the counter is enabled.
> -    With flag PERF_EF_RELOAD, it writes an appropriate value to the counter (check
> -    previous section for detail).
> -    Nothing is written if the flag does not contain PERF_EF_RELOAD.
> -    The state now is reset to none, because it is neither stopped nor updated
> -    (the counting already started)
> -
> -* When being context-switched out, *del* is called.  It then checks out all the
> -  events in the PMU and calls *stop* to update their counts.
> -
> -  - *stop* is called by *del*
> -    and the perf core with flag PERF_EF_UPDATE, and it often shares the same
> -    subroutine as *read* with the same logic.
> -    The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, again.
> -
> -  - Life cycle of these two pairs: *add* and *del* are called repeatedly as
> -    tasks switch in-and-out; *start* and *stop* is also called when the perf core
> -    needs a quick stop-and-start, for instance, when the interrupt period is being
> -    adjusted.
> -
> -Current implementation is sufficient for now and can be easily extended to
> -features in the future.
> -
> -A. Related Structures
> ----------------------
> -
> -* struct pmu: include/linux/perf_event.h
> -* struct riscv_pmu: arch/riscv/include/asm/perf_event.h
> -
> -  Both structures are designed to be read-only.
> -
> -  *struct pmu* defines some function pointer interfaces, and most of them take
> -  *struct perf_event* as a main argument, dealing with perf events according to
> -  perf's internal state machine (check kernel/events/core.c for details).
> -
> -  *struct riscv_pmu* defines PMU-specific parameters.  The naming follows the
> -  convention of all other architectures.
> -
> -* struct perf_event: include/linux/perf_event.h
> -* struct hw_perf_event
> -
> -  The generic structure that represents perf events, and the hardware-related
> -  details.
> -
> -* struct riscv_hw_events: arch/riscv/include/asm/perf_event.h
> -
> -  The structure that holds the status of events, has two fixed members:
> -  the number of events and the array of the events.
> -
> -References
> -----------
> -
> -[1] https://github.com/riscv/riscv-linux/pull/124
> -
> -[2] https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/f19TmCNP6yA
> --
> 2.33.1
>

Powered by blists - more mailing lists