linux-kernel - [RFC PATCH v3 0/4] Fix and improve gpmi nand on mx28

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 17 Jan 2022 17:17:51 +0100
From:   Dario Binacchi <dario.binacchi@...rulasolutions.com>
To:     linux-kernel@...r.kernel.org
Cc:     Michael Trimarchi <michael@...rulasolutions.com>,
        Dario Binacchi <dario.binacchi@...rulasolutions.com>,
        Boris Brezillon <bbrezillon@...nel.org>,
        Fabio Estevam <festevam@...il.com>, Han Xu <han.xu@....com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Richard Weinberger <richard@....at>,
        Rob Herring <robh+dt@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Shawn Guo <shawnguo@...nel.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Vignesh Raghavendra <vigneshr@...com>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mtd@...ts.infradead.org
Subject: [RFC PATCH v3 0/4] Fix and improve gpmi nand on mx28

Starting from [1], the series fixes the timings setting of the gpmi
controller for the mx28 architecture, also adding support for fast
edo mode timings. The whole series has been heavily tested with the
mtd kernel test modules, and with repeated write cycles on nand.

[1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org

Changes in v3:
- Remove the "mtd: rawnand: gpmi: use a table to get EDO mode setup" patch.
- Simplify the validation logic (suggested by Sascha Hauer <sha@...gutronix.de>).

Changes in v2:
- Reparent by device tree instead of code (drivers/clk/mxs/clk-imx28.c).
  Suggested by Stephen Boyd.
- Improve the commit description.
- give examples of frequencies on my setup.
- Fix commit description.
- Add an example to the commit description to better understand the
  problem solved by the patch.
- Split the patch.
- Improve the commit message.
- Move the patch to the end of the series.

Dario Binacchi (4):
  ARM: dts: imx28: reparent gpmi clock to ref_gpmi
  mtd: rawnand: gpmi: fix controller timings setting
  mtd: rawnand: gpmi: validate controller clock rate
  mtd: rawnand: gpmi: support fast edo timings for mx28

 arch/arm/boot/dts/imx28.dtsi               |  2 ++
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 27 ++++++++++++++++++----
 2 files changed, 24 insertions(+), 5 deletions(-)

-- 
2.32.0