[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAE-0n51+-+-NRAFbnvZnGH_nq+P7cxyUuSgSD992G=joumMA1A@mail.gmail.com>
Date: Thu, 3 Feb 2022 21:09:09 +0000
From: Stephen Boyd <swboyd@...omium.org>
To: Prasad Malisetty <quic_pmaliset@...cinc.com>, agross@...nel.org,
bhelgaas@...gle.com, bjorn.andersson@...aro.org,
devicetree@...r.kernel.org, kw@...ux.com,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, lorenzo.pieralisi@....com,
robh@...nel.org
Cc: quic_vbadigan@...cinc.com, quic_ramkri@...cinc.com,
manivannan.sadhasivam@...aro.org, dianders@...omium.org
Subject: Re: [PATCH v1] arm64: dts: qcom: sc7280: Fix pcie gpio entries
Quoting Prasad Malisetty (2022-02-02 00:21:22)
> Current gpio's in IDP file are not mapping properly,
> seeing device timedout failures.
What's the problem exactly?
>
> Corrected pcie gpio entries in dtsi files.
>
> Fixes: 4e24d227aa77 ("arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board")
>
> Signed-off-by: Prasad Malisetty <quic_pmaliset@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++------------------
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 10 ++++++++-
> 2 files changed, 24 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 78da9ac..84bf9d2 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -243,9 +243,6 @@
> perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
>
> vddpe-3v3-supply = <&nvme_3v3_regulator>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
> };
>
> &pcie1_phy {
> @@ -360,6 +357,21 @@
>
> /* PINCTRL - additions to nodes defined in sc7280.dtsi */
>
> +&pcie1_reset_n {
> + pins = "gpio2";
> +
> + drive-strength = <16>;
Is drive-strength of 16 actually necessary?
> + output-low;
> + bias-disable;
> +};
> +
> +&pcie1_wake_n {
> + pins = "gpio3";
> +
> + drive-strength = <2>;
> + bias-pull-up;
> +};
> +
> &pm7325_gpios {
> key_vol_up_default: key-vol-up-default {
> pins = "gpio6";
> @@ -436,23 +448,6 @@
> function = "gpio";
> };
>
> - pcie1_reset_n: pcie1-reset-n {
> - pins = "gpio2";
> - function = "gpio";
> -
> - drive-strength = <16>;
> - output-low;
> - bias-disable;
> - };
> -
> - pcie1_wake_n: pcie1-wake-n {
> - pins = "gpio3";
> - function = "gpio";
> -
> - drive-strength = <2>;
> - bias-pull-up;
> - };
> -
> qup_uart7_sleep_cts: qup-uart7-sleep-cts {
> pins = "gpio28";
> function = "gpio";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index d4009cc..2e14c37 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1640,7 +1640,7 @@
> phy-names = "pciephy";
>
> pinctrl-names = "default";
> - pinctrl-0 = <&pcie1_clkreq_n>;
> + pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
>
> iommus = <&apps_smmu 0x1c80 0x1>;
>
> @@ -3272,6 +3272,14 @@
> bias-pull-up;
> };
>
> + pcie1_reset_n: pcie1-reset-n {
> + function = "gpio";
> + };
> +
> + pcie1_wake_n: pcie1-wake-n {
> + function = "gpio";
> + };
> +
> dp_hot_plug_det: dp-hot-plug-det {
> pins = "gpio47";
> function = "dp_hot";
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
Powered by blists - more mailing lists