linux-kernel - Re: [PATCH v1] arm64: dts: qcom: sc7280: Fix pcie gpio entries

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <YfxIOi9ZhVoUNvQJ@ripper>
Date:   Thu, 3 Feb 2022 13:25:14 -0800
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Prasad Malisetty <quic_pmaliset@...cinc.com>
Cc:     agross@...nel.org, lorenzo.pieralisi@....com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        robh@...nel.org, kw@...ux.com, bhelgaas@...gle.com,
        linux-pci@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        quic_vbadigan@...cinc.com, quic_ramkri@...cinc.com,
        manivannan.sadhasivam@...aro.org, swboyd@...omium.org
Subject: Re: [PATCH v1] arm64: dts: qcom: sc7280: Fix pcie gpio entries

On Wed 02 Feb 00:21 PST 2022, Prasad Malisetty wrote:

> Current gpio's in IDP file are not mapping properly,
> seeing device timedout failures.
> 

It's not obvious from the proposed patch which part fixes this and which
part relates to moving part of the nodes between dtsi and dts.

> Corrected pcie gpio entries in dtsi files.
> 
> Fixes: 4e24d227aa77 ("arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board")
> 

There's not supposed to be a blank line here.

> Signed-off-by: Prasad Malisetty <quic_pmaliset@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++------------------
>  arch/arm64/boot/dts/qcom/sc7280.dtsi     | 10 ++++++++-
>  2 files changed, 24 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 78da9ac..84bf9d2 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -243,9 +243,6 @@
>  	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
>  
>  	vddpe-3v3-supply = <&nvme_3v3_regulator>;
> -
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
>  };
>  
>  &pcie1_phy {
> @@ -360,6 +357,21 @@
>  
>  /* PINCTRL - additions to nodes defined in sc7280.dtsi */
>  
> +&pcie1_reset_n {
> +	pins = "gpio2";
> +
> +	drive-strength = <16>;
> +	output-low;
> +	bias-disable;
> +};
> +
> +&pcie1_wake_n {
> +	pins = "gpio3";
> +
> +	drive-strength = <2>;
> +	bias-pull-up;
> +};
> +
>  &pm7325_gpios {
>  	key_vol_up_default: key-vol-up-default {
>  		pins = "gpio6";
> @@ -436,23 +448,6 @@
>  		function = "gpio";
>  	};
>  
> -	pcie1_reset_n: pcie1-reset-n {
> -		pins = "gpio2";
> -		function = "gpio";
> -
> -		drive-strength = <16>;
> -		output-low;
> -		bias-disable;
> -	};
> -
> -	pcie1_wake_n: pcie1-wake-n {
> -		pins = "gpio3";
> -		function = "gpio";
> -
> -		drive-strength = <2>;
> -		bias-pull-up;
> -	};
> -
>  	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
>  		pins = "gpio28";
>  		function = "gpio";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index d4009cc..2e14c37 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1640,7 +1640,7 @@
>  			phy-names = "pciephy";
>  
>  			pinctrl-names = "default";
> -			pinctrl-0 = <&pcie1_clkreq_n>;
> +			pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
>  
>  			iommus = <&apps_smmu 0x1c80 0x1>;
>  
> @@ -3272,6 +3272,14 @@
>  				bias-pull-up;
>  			};
>  
> +			pcie1_reset_n: pcie1-reset-n {

I find the idea of partially describing the state in two files hard to
follow - in particular you need to read both parts of &pcie1_reset_n to
understand what the state this represents.

Keep it as it was, and fix the problem you're seeing, without the
refactoring.

Regards,
Bjorn

> +				function = "gpio";
> +			};
> +
> +			pcie1_wake_n: pcie1-wake-n {
> +				function = "gpio";
> +			};
> +
>  			dp_hot_plug_det: dp-hot-plug-det {
>  				pins = "gpio47";
>  				function = "dp_hot";
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>