[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4044945.1IzOArtZ34@steina-w>
Date: Mon, 07 Feb 2022 13:08:21 +0100
From: Alexander Stein <alexander.stein@...tq-group.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Steve Longerbeam <slongerbeam@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Rui Miguel Silva <rmfrfs@...il.com>,
Dorota Czaplejewicz <dorota.czaplejewicz@...i.sm>,
linux-media@...r.kernel.org, linux-staging@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: (EXT) Re: [PATCH 3/8] media: imx: Use dedicated format handler for i.MX7/8
Hi Laurent,
Am Samstag, 5. Februar 2022, 05:04:50 CET schrieb Laurent Pinchart:
> Hi Alexander and Dorota,
>
> Thank you for the patch.
>
> On Fri, Feb 04, 2022 at 01:15:09PM +0100, Alexander Stein wrote:
> > From: Dorota Czaplejewicz <dorota.czaplejewicz@...i.sm>
> >
> > This splits out a format handler which takes into account
> > the capabilities of the i.MX7/8 video device,
> > as opposed to the default handler compatible with both i.MX5/6 and
> > i.MX7/8.
> >
> > Signed-off-by: Dorota Czaplejewicz <dorota.czaplejewicz@...i.sm>
> > Signed-off-by: Alexander Stein <alexander.stein@...tq-group.com>
> > ---
> > Changes in comparison to original commit from Dorota:
> > * is_imx56 is used instead of enum
> >
> > drivers/staging/media/imx/imx-media-utils.c | 56 +++++++++++++++++++--
> > 1 file changed, 52 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/staging/media/imx/imx-media-utils.c
> > b/drivers/staging/media/imx/imx-media-utils.c index
> > 0daa6aad45f4..32aaa2e81bea 100644
> > --- a/drivers/staging/media/imx/imx-media-utils.c
> > +++ b/drivers/staging/media/imx/imx-media-utils.c
> > @@ -516,10 +516,9 @@ void imx_media_try_colorimetry(struct
> > v4l2_mbus_framefmt *tryfmt,>
> > }
> > EXPORT_SYMBOL_GPL(imx_media_try_colorimetry);
> >
> > -int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
> > - const struct v4l2_mbus_framefmt
*mbus,
> > - const struct imx_media_pixfmt
*cc,
> > - bool is_imx56)
> > +static int imx56_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
> > + const struct
v4l2_mbus_framefmt *mbus,
> > + const struct
imx_media_pixfmt *cc)
> >
> > {
> >
> > u32 width;
> > u32 stride;
> >
> > @@ -568,6 +567,55 @@ int imx_media_mbus_fmt_to_pix_fmt(struct
> > v4l2_pix_format *pix,>
> > return 0;
> >
> > }
> >
> > +
> > +static int imx78_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
> > + const struct
v4l2_mbus_framefmt *mbus,
> > + const struct
imx_media_pixfmt *cc)
> > +{
> > + int ret;
> > +
> > + if (!cc)
> > + cc = imx_media_find_mbus_format(mbus->code,
PIXFMT_SEL_ANY);
> > +
> > + if (!cc)
> > + return -EINVAL;
> > + /*
> > + * The hardware can handle line lengths divisible by 4 pixels
> > + * as long as the whole buffer size ends up divisible by 8 bytes.
> > + * If not, use the value of 8 pixels recommended in the datasheet.
> > + */
> > + ret = v4l2_fill_pixfmt(pix, cc->fourcc,
> > + round_up(mbus->width, 4), mbus-
>height);
> > + if (ret)
> > + return ret;
> > +
> > + /* Only 8bits-per-pixel formats may need to get aligned to 8
pixels,
> > + * because both 10-bit and 16-bit pixels occupy 2 bytes.
> > + * In those, 4-pixel aligmnent is equal to 8-byte alignment.
> > + */
> > + if (pix->sizeimage % 8 != 0)
> > + ret = v4l2_fill_pixfmt(pix, cc->fourcc,
> > + round_up(mbus->width, 8),
mbus->height);
>
> I think you could simplify this by using cc->bpp to figure out the
> alignment instead of calling v4l2_fill_pixfmt() twice.
Yeah, this should be possible. I can't test it (yet) though, I don't have a 8-
Bit sensor. Will do in the next version.
> > + pix->colorspace = mbus->colorspace;
> > + pix->xfer_func = mbus->xfer_func;
> > + pix->ycbcr_enc = mbus->ycbcr_enc;
> > + pix->quantization = mbus->quantization;
> > + pix->field = mbus->field;
>
> Should v4l2_fill_pixfmt() be updated to handle colorspace and field too
> instead of doing it manually here ?
I'm not so sure which parts of v4l2_pix_format shall be set into
v4l2_fill_pixfmt(). Unfortunately there is no API description in the header,
git log doesn't help much either. In the end this should be a separate patch.
Best regards,
Alexander
> > +
> > + return ret;
> > +}
> > +
> > +int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
> > + const struct v4l2_mbus_framefmt
*mbus,
> > + const struct imx_media_pixfmt
*cc,
> > + bool is_imx56)
> > +{
> > + if (is_imx56)
> > + return imx56_media_mbus_fmt_to_pix_fmt(pix, mbus, cc);
> > + else
> > + return imx78_media_mbus_fmt_to_pix_fmt(pix, mbus, cc);
> > +}
> >
> > EXPORT_SYMBOL_GPL(imx_media_mbus_fmt_to_pix_fmt);
> >
> > void imx_media_free_dma_buf(struct device *dev,
Powered by blists - more mailing lists