| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Feb 2022 06:28:51 -0600
From: Rob Herring <robh@...nel.org>
To: Guodong Liu <guodong.liu@...iatek.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...nel.org>,
Sean Wang <sean.wang@...iatek.com>, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Project_Global_Chrome_Upstream_Group@...iatek.com
Subject: Re: [PATCH v3 1/3] dt-bindings: pinctrl: mt8186: add pinctrl file
and binding document
On Thu, Feb 10, 2022 at 02:21:20PM +0800, Guodong Liu wrote:
> 1. This patch adds pinctrl file for mt8186.
> 2. This patch adds mt8186 compatible node in binding document.
>
> Signed-off-by: Guodong Liu <guodong.liu@...iatek.com>
> ---
> .../bindings/pinctrl/pinctrl-mt8186.yaml | 313 +++++
> include/dt-bindings/pinctrl/mt8186-pinfunc.h | 1174 +++++++++++++++++
> 2 files changed, 1487 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
> create mode 100644 include/dt-bindings/pinctrl/mt8186-pinfunc.h
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
> new file mode 100644
> index 000000000000..54c9508af922
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
> @@ -0,0 +1,313 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT8186 Pin Controller
> +
> +maintainers:
> + - Sean Wang <sean.wang@...iatek.com>
> +
> +description: |
> + The Mediatek's Pin controller is used to control SoC pins.
> +
> +properties:
> + compatible:
> + const: mediatek,mt8186-pinctrl
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + description: |
> + Number of cells in GPIO specifier. Since the generic GPIO binding is used,
> + the amount of cells must be specified as 2. See the below
> + mentioned gpio binding representation for description of particular cells.
> + const: 2
> +
> + gpio-ranges:
> + description: gpio valid number range.
Don't need generic descriptions for common properties
> + maxItems: 1
> +
> + reg:
> + description: |
> + Physical address base for gpio base registers. There are 8 different GPIO
> + physical address base in mt8186.
> + maxItems: 8
> +
> + reg-names:
> + description: |
> + Gpio base register names.
> + items:
> + - const: "iocfg0"
> + - const: "iocfg_bm"
> + - const: "iocfg_bl"
> + - const: "iocfg_br"
> + - const: "iocfg_lm"
> + - const: "iocfg_rb"
> + - const: "iocfg_tl"
> + - const: "eint"
Don't need quotes
> + maxItems: 8
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + const: 2
> +
> + interrupts:
> + description: The interrupt outputs to sysirq.
Drop.
> + maxItems: 1
> +
> + mediatek,rsel-resistance-in-si-unit:
> + type: boolean
> + description: |
> + Identifying i2c pins pull up/down type which is RSEL. It can support
> + RSEL define or si unit value(ohm) to set different resistance.
> +
> +# PIN CONFIGURATION NODES
> +patternProperties:
> + '-pins$':
> + type: object
> + additionalProperties: false
> + patternProperties:
> + '^pins':
> + type: object
> + additionalProperties: false
> + description: |
> + A pinctrl node should contain at least one subnodes representing the
> + pinctrl groups available on the machine. Each subnode will list the
> + pins it needs, and how they should be configured, with regard to muxer
> + configuration, pullups, drive strength, input enable/disable and
> + input schmitt.
> + An example of using macro:
> + pincontroller {
> + /* GPIO0 set as multifunction GPIO0 */
> + gpio-pins {
> + pins {
> + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> + }
> + };
> + /* GPIO128 set as multifunction SDA0 */
> + i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
> + }
> + };
> + };
> + $ref: "pinmux-node.yaml"
> +
> + properties:
> + pinmux:
> + description: |
> + Integer array, represents gpio pin number and mux setting.
> + Supported pin number and mux varies for different SoCs, and are
> + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
> + directly.
> +
> + drive-strength:
> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +
> + mediatek,drive-strength-adv:
> + description: |
> + Describe the specific driving setup property.
> + For I2C pins, the existing generic driving setup can only support
> + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
> + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
> + driving setup, the existing generic setup will be disabled.
> + The specific driving setup is controlled by E1E0EN.
> + When E1=0/E0=0, the strength is 0.125mA.
> + When E1=0/E0=1, the strength is 0.25mA.
> + When E1=1/E0=0, the strength is 0.5mA.
> + When E1=1/E0=1, the strength is 1mA.
> + EN is used to enable or disable the specific driving setup.
> + Valid arguments are described as below:
> + 0: (E1, E0, EN) = (0, 0, 0)
> + 1: (E1, E0, EN) = (0, 0, 1)
> + 2: (E1, E0, EN) = (0, 1, 0)
> + 3: (E1, E0, EN) = (0, 1, 1)
> + 4: (E1, E0, EN) = (1, 0, 0)
> + 5: (E1, E0, EN) = (1, 0, 1)
> + 6: (E1, E0, EN) = (1, 1, 0)
> + 7: (E1, E0, EN) = (1, 1, 1)
> + So the valid arguments are from 0 to 7.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +
> + bias-pull-down:
> + oneOf:
> + - enum: [100, 101, 102, 103]
> + - description: mt8186 pull down PUPD/R0/R1 type define value.
> + - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> + - description: mt8186 pull down RSEL type define value.
> + - enum: [75000, 5000]
> + - description: mt8186 pull down RSEL type si unit value(ohm).
This should fail validation. All the description entries are True, so
oneOf will be False. Drop the '-' on description so the enum and
description are 1 entry.
> +
> + description: |
> + For pull down type is normal, it don't need add RSEL & R1R0 define
> + and resistance value.
> + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
> + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> + "MTK_PUPD_SET_R1R0_11" define in mt8186.
> + For pull down type is RSEL, it can add RSEL define & resistance
> + value(ohm) to set different resistance by identifying property
> + "mediatek,rsel-resistance-in-si-unit".
> + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
> + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
> + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> + define in mt8186. It can also support resistance value(ohm)
> + "75000" & "5000" in mt8186.
> + An example of using RSEL define:
Perhaps move this to the example.
> + pincontroller {
> + i2c0_pin {
> + pins {
> + pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
> + bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> + }
> + };
> + };
> + An example of using si unit resistance value(ohm):
> + &pio {
> + mediatek,rsel-resistance-in-si-unit;
> + }
> + pincontroller {
> + i2c0_pin {
> + pins {
> + pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
> + bias-pull-down = <75000>;
> + }
> + };
> + };
> +
> + bias-pull-up:
> + oneOf:
> + - enum: [100, 101, 102, 103]
> + - description: mt8186 pull up PUPD/R0/R1 type define value.
> + - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> + - description: mt8186 pull up RSEL type define value.
> + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
> + - description: mt8186 pull up RSEL type si unit value(ohm).
> +
> + description: |
> + For pull up type is normal, it don't need add RSEL & R1R0 define
> + and resistance value.
> + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
> + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> + "MTK_PUPD_SET_R1R0_11" define in mt8186.
> + For pull up type is RSEL, it can add RSEL define & resistance
> + value(ohm) to set different resistance by identifying property
> + "mediatek,rsel-resistance-in-si-unit".
> + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
> + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
> + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> + define in mt8186. It can also support resistance value(ohm)
> + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" &
> + "75000" in mt8186.
> + An example of using RSEL define:
> + pincontroller {
> + i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
> + bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> + }
> + };
> + };
> + An example of using si unit resistance value(ohm):
> + &pio {
> + mediatek,rsel-resistance-in-si-unit;
> + }
> + pincontroller {
> + i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
> + bias-pull-up = <1000>;
> + }
> + };
> + };
> +
> + bias-disable: true
> +
> + output-high: true
> +
> + output-low: true
> +
> + input-enable: true
> +
> + input-disable: true
> +
> + input-schmitt-enable: true
> +
> + input-schmitt-disable: true
> +
> + required:
> + - pinmux
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - '#interrupt-cells'
> + - gpio-controller
> + - '#gpio-cells'
> + - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/mt8186-pinfunc.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + pio: pinctrl@...05000 {
> + compatible = "mediatek,mt8186-pinctrl";
> + reg = <0x10005000 0x1000>,
> + <0x10002000 0x0200>,
> + <0x10002200 0x0200>,
> + <0x10002400 0x0200>,
> + <0x10002600 0x0200>,
> + <0x10002A00 0x0200>,
> + <0x10002c00 0x0200>,
> + <0x1000b000 0x1000>;
> + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
> + "iocfg_br", "iocfg_lm", "iocfg_rb",
> + "iocfg_tl", "eint";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pio 0 0 185>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
> + #interrupt-cells = <2>;
> +
> + pio-pins {
> + pins {
> + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> + output-low;
> + };
> + };
> +
> + spi0-pins {
> + pins-spi {
> + pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
> + <PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
> + <PINMUX_GPIO2__FUNC_SPI0_MO_B>;
> + bias-disable;
> + };
> + pins-spi-mi {
> + pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
> + bias-pull-down;
> + };
> + };
> +
> + i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
> + <PINMUX_GPIO128__FUNC_SDA0>;
> + bias-disable;
> + mediatek,drive-strength-adv = <7>;
> + };
> + };
> + };
Powered by blists - more mailing lists