Message-ID: <YgpyMRTo5wVMhUPl@FVFF77S0Q05N>
Date:   Mon, 14 Feb 2022 15:16:01 +0000
From:   Mark Rutland <mark.rutland@....com>
To:     Sai Prakash Ranjan <quic_saipraka@...cinc.com>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Elliot Berman <quic_eberman@...cinc.com>,
        linux-arm-kernel@...ts.infradead.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        Shanker Donthineni <shankerd@...eaurora.org>,
        Adam Wallis <awallis@...eaurora.org>,
        Timur Tabi <timur@...eaurora.org>,
        Elliot Berman <eberman@...eaurora.org>
Subject: Re: [PATCHv4] tty: hvc: dcc: Bind driver to CPU core0 for reads and
 writes

Hi,

On Thu, Feb 10, 2022 at 07:26:32PM +0530, Sai Prakash Ranjan wrote:
> From: Shanker Donthineni <shankerd@...eaurora.org>
> 
> Some debuggers, such as Trace32 from Lauterbach GmbH, do not handle
> reads/writes from/to DCC on secondary cores. Each core has its
> own DCC device registers, so when a core reads or writes from/to DCC,
> it only accesses its own DCC device. Since kernel code can run on
> any core, every time the kernel wants to write to the console, it
> might write to a different DCC.
> 
> In SMP mode, Trace32 creates multiple windows, and each window shows
> the DCC output only from that core's DCC. The result is that console
> output is either lost or scattered across windows.

This has been the Linux behaviour since the dawn of time, so why is this not
considered to be a bug in the tools? Why can't Lauterbach add an option to
treat the cores as one?

Importantly, with hotplug we *cannot* guarantee that all messages will go to
the same CPU anyway, since that could be offlined (even if it is CPU 0), so in
general we cann't provide a guarantee here.

> Selecting this option will enable code that serializes all console
> input and output to core 0. The DCC driver will create input and
> output FIFOs that all cores will use. Reads and writes from/to DCC
> are handled by a workqueue that runs only core 0.

What is 'core 0'?

Do you actually need a *specific* PE to be used, or just some singular PE?

What happens with hotplug, as above?

Do you need to inihibit that?

Thanks,
Mark.

> Signed-off-by: Shanker Donthineni <shankerd@...eaurora.org>
> Acked-by: Adam Wallis <awallis@...eaurora.org>
> Signed-off-by: Timur Tabi <timur@...eaurora.org>
> Signed-off-by: Elliot Berman <eberman@...eaurora.org>
> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@...cinc.com>
> ---
> 
> Changes in v4:
>  * Use module parameter for runtime choice of enabling this feature.
>  * Use hotplug locks to avoid race between cpu online check and work schedule.
>  * Remove ifdefs and move to common ops.
>  * Remove unnecessary check for this configuration.
>  * Use macros for buf size instead of magic numbers.
>  * v3 - https://lore.kernel.org/lkml/20211213141013.21464-1-quic_saipraka@quicinc.com/
> 
> Changes in v3:
>  * Handle case where core0 is not online.
> 
> Changes in v2:
>  * Checkpatch warning fixes.
>  * Use of IS_ENABLED macros instead of ifdefs.
> 
> ---
>  drivers/tty/hvc/hvc_dcc.c | 177 +++++++++++++++++++++++++++++++++++++-
>  1 file changed, 174 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
> index 8e0edb7d93fd..535b09441e55 100644
> --- a/drivers/tty/hvc/hvc_dcc.c
> +++ b/drivers/tty/hvc/hvc_dcc.c
> @@ -2,19 +2,35 @@
>  /* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.  */
>  
>  #include <linux/console.h>
> +#include <linux/cpu.h>
> +#include <linux/cpumask.h>
>  #include <linux/init.h>
> +#include <linux/kfifo.h>
> +#include <linux/moduleparam.h>
>  #include <linux/serial.h>
>  #include <linux/serial_core.h>
> +#include <linux/spinlock.h>
>  
>  #include <asm/dcc.h>
>  #include <asm/processor.h>
>  
>  #include "hvc_console.h"
>  
> +static bool serialize_smp;
> +module_param(serialize_smp, bool, 0444);
> +MODULE_PARM_DESC(serialize_smp, "Serialize all DCC console input and output to CPU core 0");
> +
>  /* DCC Status Bits */
>  #define DCC_STATUS_RX		(1 << 30)
>  #define DCC_STATUS_TX		(1 << 29)
>  
> +#define DCC_INBUF_SIZE		128
> +#define DCC_OUTBUF_SIZE		1024
> +
> +static DEFINE_SPINLOCK(dcc_lock);
> +static DEFINE_KFIFO(inbuf, unsigned char, DCC_INBUF_SIZE);
> +static DEFINE_KFIFO(outbuf, unsigned char, DCC_OUTBUF_SIZE);
> +
>  static void dcc_uart_console_putchar(struct uart_port *port, int ch)
>  {
>  	while (__dcc_getstatus() & DCC_STATUS_TX)
> @@ -67,24 +83,179 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
>  	return i;
>  }
>  
> +/*
> + * Check if the DCC is enabled. If serialize_smp module param is enabled,
> + * then we assume then this function will be called first on core0. That way,
> + * dcc_core0_available will be true only if it's available on core0.
> + */
>  static bool hvc_dcc_check(void)
>  {
>  	unsigned long time = jiffies + (HZ / 10);
> +	static bool dcc_core0_available;
> +
> +	/*
> +	 * If we're not on core 0, but we previously confirmed that DCC is
> +	 * active, then just return true.
> +	 */
> +	if (serialize_smp && smp_processor_id() && dcc_core0_available)
> +		return true;
>  
>  	/* Write a test character to check if it is handled */
>  	__dcc_putchar('\n');
>  
>  	while (time_is_after_jiffies(time)) {
> -		if (!(__dcc_getstatus() & DCC_STATUS_TX))
> +		if (!(__dcc_getstatus() & DCC_STATUS_TX)) {
> +			dcc_core0_available = true;
>  			return true;
> +		}
>  	}
>  
>  	return false;
>  }
>  
> +/*
> + * Workqueue function that writes the output FIFO to the DCC on core 0.
> + */
> +static void dcc_put_work(struct work_struct *work)
> +{
> +	unsigned char ch;
> +	unsigned long irqflags;
> +
> +	spin_lock_irqsave(&dcc_lock, irqflags);
> +
> +	/* While there's data in the output FIFO, write it to the DCC */
> +	while (kfifo_get(&outbuf, &ch))
> +		hvc_dcc_put_chars(0, &ch, 1);
> +
> +	/* While we're at it, check for any input characters */
> +	while (!kfifo_is_full(&inbuf)) {
> +		if (!hvc_dcc_get_chars(0, &ch, 1))
> +			break;
> +		kfifo_put(&inbuf, ch);
> +	}
> +
> +	spin_unlock_irqrestore(&dcc_lock, irqflags);
> +}
> +
> +static DECLARE_WORK(dcc_pwork, dcc_put_work);
> +
> +/*
> + * Workqueue function that reads characters from DCC and puts them into the
> + * input FIFO.
> + */
> +static void dcc_get_work(struct work_struct *work)
> +{
> +	unsigned char ch;
> +	unsigned long irqflags;
> +
> +	/*
> +	 * Read characters from DCC and put them into the input FIFO, as
> +	 * long as there is room and we have characters to read.
> +	 */
> +	spin_lock_irqsave(&dcc_lock, irqflags);
> +
> +	while (!kfifo_is_full(&inbuf)) {
> +		if (!hvc_dcc_get_chars(0, &ch, 1))
> +			break;
> +		kfifo_put(&inbuf, ch);
> +	}
> +	spin_unlock_irqrestore(&dcc_lock, irqflags);
> +}
> +
> +static DECLARE_WORK(dcc_gwork, dcc_get_work);
> +
> +/*
> + * Write characters directly to the DCC if we're on core 0 and the FIFO
> + * is empty, or write them to the FIFO if we're not.
> + */
> +static int hvc_dcc0_put_chars(u32 vt, const char *buf, int count)
> +{
> +	int len;
> +	unsigned long irqflags;
> +
> +	if (!serialize_smp)
> +		return hvc_dcc_put_chars(vt, buf, count);
> +
> +	spin_lock_irqsave(&dcc_lock, irqflags);
> +	if (smp_processor_id() || (!kfifo_is_empty(&outbuf))) {
> +		len = kfifo_in(&outbuf, buf, count);
> +		spin_unlock_irqrestore(&dcc_lock, irqflags);
> +
> +		/*
> +		 * We just push data to the output FIFO, so schedule the
> +		 * workqueue that will actually write that data to DCC.
> +		 * Also take a CPU hotplug lock to avoid CPU going down
> +		 * between the check and scheduling work on CPU0.
> +		 */
> +		cpus_read_lock();
> +
> +		if (cpu_online(0))
> +			schedule_work_on(0, &dcc_pwork);
> +
> +		cpus_read_unlock();
> +
> +		return len;
> +	}
> +
> +	/*
> +	 * If we're already on core 0, and the FIFO is empty, then just
> +	 * write the data to DCC.
> +	 */
> +	len = hvc_dcc_put_chars(vt, buf, count);
> +	spin_unlock_irqrestore(&dcc_lock, irqflags);
> +
> +	return len;
> +}
> +
> +/*
> + * Read characters directly from the DCC if we're on core 0 and the FIFO
> + * is empty, or read them from the FIFO if we're not.
> + */
> +static int hvc_dcc0_get_chars(u32 vt, char *buf, int count)
> +{
> +	int len;
> +	unsigned long irqflags;
> +
> +	if (!serialize_smp)
> +		return hvc_dcc_get_chars(vt, buf, count);
> +
> +	spin_lock_irqsave(&dcc_lock, irqflags);
> +
> +	if (smp_processor_id() || (!kfifo_is_empty(&inbuf))) {
> +		len = kfifo_out(&inbuf, buf, count);
> +		spin_unlock_irqrestore(&dcc_lock, irqflags);
> +
> +		/*
> +		 * If the FIFO was empty, there may be characters in the DCC
> +		 * that we haven't read yet.  Schedule a workqueue to fill
> +		 * the input FIFO, so that the next time this function is
> +		 * called, we'll have data. Take a CPU hotplug lock as well
> +		 * to avoid CPU going down between the cpu online check and
> +		 * scheduling work on CPU0.
> +		 */
> +		cpus_read_lock();
> +
> +		if (!len && cpu_online(0))
> +			schedule_work_on(0, &dcc_gwork);
> +
> +		cpus_read_unlock();
> +
> +		return len;
> +	}
> +
> +	/*
> +	 * If we're already on core 0, and the FIFO is empty, then just
> +	 * read the data from DCC.
> +	 */
> +	len = hvc_dcc_get_chars(vt, buf, count);
> +	spin_unlock_irqrestore(&dcc_lock, irqflags);
> +
> +	return len;
> +}
> +
>  static const struct hv_ops hvc_dcc_get_put_ops = {
> -	.get_chars = hvc_dcc_get_chars,
> -	.put_chars = hvc_dcc_put_chars,
> +	.get_chars = hvc_dcc0_get_chars,
> +	.put_chars = hvc_dcc0_put_chars,
>  };
>  
>  static int __init hvc_dcc_console_init(void)
> 
> base-commit: 395a61741f7ea29e1f4a0d6e160197fe8e377572
> -- 
> 2.33.1
> 

Powered by blists - more mailing lists