[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220214092453.996333395@linuxfoundation.org>
Date: Mon, 14 Feb 2022 10:26:26 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Adam Ford <aford173@...il.com>
Subject: [PATCH 5.4 58/71] usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition
From: Adam Ford <aford173@...il.com>
commit 459702eea6132888b5c5b64c0e9c626da4ec2493 upstream.
The support the external role switch a variety of situations were
addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE
leaves the host up which can cause some error messages when
switching from host to none, to gadget, to none, and then back
to host again.
xhci-hcd ee000000.usb: Abort failed to stop command ring: -110
xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead
xhci-hcd ee000000.usb: HC died; cleaning up
usb 4-1: device not accepting address 6, error -108
usb usb4-port1: couldn't allocate usb_device
After this happens it will not act as a host again.
Fix this by releasing the host mode when transitioning to USB_ROLE_NONE.
Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support")
Cc: stable <stable@...r.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Signed-off-by: Adam Ford <aford173@...il.com>
Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/usb/gadget/udc/renesas_usb3.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2363,6 +2363,8 @@ static void handle_ext_role_switch_state
switch (role) {
case USB_ROLE_NONE:
usb3->connection_state = USB_ROLE_NONE;
+ if (cur_role == USB_ROLE_HOST)
+ device_release_driver(host);
if (usb3->driver)
usb3_disconnect(usb3);
usb3_vbus_out(usb3, false);
Powered by blists - more mailing lists