| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220219144110.GA1032070@roeck-us.net>
Date: Sat, 19 Feb 2022 06:41:10 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Marcello Sylvester Bauer <sylv@...v.io>
Cc: Jean Delvare <jdelvare@...e.com>, Jonathan Corbet <corbet@....net>,
linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
Patrick Rudolph <patrick.rudolph@...ements.com>,
linux-doc@...r.kernel.org
Subject: Re: [PATCH v3 3/4] pmbus: Add support for pli1209bc
On Mon, Feb 14, 2022 at 10:44:55PM +0100, Marcello Sylvester Bauer wrote:
> PLI1209BC is a Digital Supervisor from Vicor Corporation.
>
> Signed-off-by: Marcello Sylvester Bauer <sylv@...v.io>
checkpatch says:
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#82: FILE: Documentation/hwmon/pli1209bc.rst:1:
+Kernel driver pli1209bc
I can not accept the patch without license identifier.
> ---
> Documentation/hwmon/pli1209bc.rst | 73 +++++++++++++++++++
This needs to be added to Documentation/hwmon/index.rst.
> drivers/hwmon/pmbus/Kconfig | 9 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/pli1209bc.c | 115 ++++++++++++++++++++++++++++++
> 4 files changed, 198 insertions(+)
> create mode 100644 Documentation/hwmon/pli1209bc.rst
> create mode 100644 drivers/hwmon/pmbus/pli1209bc.c
>
> diff --git a/Documentation/hwmon/pli1209bc.rst b/Documentation/hwmon/pli1209bc.rst
> new file mode 100644
> index 000000000000..a3f686d03cf2
> --- /dev/null
> +++ b/Documentation/hwmon/pli1209bc.rst
> @@ -0,0 +1,73 @@
> +Kernel driver pli1209bc
> +=======================
> +
> +Supported chips:
> +
> + * Digital Supervisor PLI1209BC
> +
> + Prefix: 'pli1209bc'
> +
> + Addresses scanned: 0x50 - 0x5F
> +
> + Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf
> +
> +Authors:
> + - Marcello Sylvester Bauer <sylv@...v.io>
> +
> +Description
> +-----------
> +
> +The Vicor PLI1209BC is an isolated digital power system supervisor thatprovides
that provides
> +a communication interface between a host processor and one Bus Converter Module
> +(BCM). The PLI communicates with a system controller via a PMBus compatible
> +interface over an isolated UART interface. Through the PLI, the host processor
> +can configure, set protection limits, and monitor the BCM.
> +
> +Sysfs entries
> +-------------
> +
> +======================= ========================================================
> +in1_label "vin2"
> +in1_input Input voltage.
> +in1_rated_min Minimum rated input voltage.
> +in1_rated_max Maximum rated input voltage.
> +in1_max Maximum input voltage.
> +in1_max_alarm Input voltage high alarm.
> +in1_crit Critical input voltage.
> +in1_crit_alarm Input voltage critical alarm.
> +
> +in2_label "vout2"
> +in2_input Output voltage.
> +in2_rated_min Minimum rated output voltage.
> +in2_rated_max Maximum rated output voltage.
> +in2_alarm Output voltage alarm
> +
> +curr1_label "iin2"
> +curr1_input Input current.
> +curr1_max Maximum input current.
> +curr1_max_alarm Maximum input current high alarm.
> +curr1_crit Critical input current.
> +curr1_crit_alarm Input current critical alarm.
> +
> +curr2_label "iout2"
> +curr2_input Output current.
> +curr2_crit Critical output current.
> +curr2_crit_alarm Output current critical alarm.
> +curr2_max Maximum output current.
> +curr2_max_alarm Output current high alarm.
> +
> +power1_label "pin2"
> +power1_input Input power.
> +power1_alarm Input power alarm.
> +
> +power2_label "pout2"
> +power2_input Output power.
> +power2_rated_max Maximum rated output power.
> +
> +temp1_input Die temperature.
> +temp1_alarm Die temperature alarm.
> +temp1_max Maximum die temperature.
> +temp1_max_alarm Die temperature high alarm.
> +temp1_crit Critical die temperature.
> +temp1_crit_alarm Die temperature critical alarm.
> +======================= ========================================================
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index c96f7b7338bd..831db423bea0 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -310,6 +310,15 @@ config SENSORS_PIM4328
> This driver can also be built as a module. If so, the module will
> be called pim4328.
>
> +config SENSORS_PLI1209BC
> + tristate "Vicor PLI1209BC"
> + help
> + If you say yes here you get hardware monitoring support for Vicor
> + PLI1209BC Digital Supervisor.
> +
> + This driver can also be built as a module. If so, the module will
> + be called pli1209bc.
> +
> config SENSORS_PM6764TR
> tristate "ST PM6764TR"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index e5935f70c9e0..7ce74e3b8552 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_SENSORS_MP2888) += mp2888.o
> obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
> obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
> obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
> +obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o
Alphabetic order please.
> obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
> obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o
> obj-$(CONFIG_SENSORS_STPDDC60) += stpddc60.o
> diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
> new file mode 100644
> index 000000000000..5f8847307e55
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/pli1209bc.c
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for Vicor PLI1209BC Digital Supervisor
> + *
> + * Copyright (c) 2022 9elements GmbH
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pmbus.h>
> +#include "pmbus.h"
> +
> +/*
> + * The capability command is only supported at page 0. Probing the device while
> + * the page register is set to 1 will falsely enable PEC support. Disable
> + * capability probing accordingly, since the PLI1209BC does not have any
> + * additional capabilities.
> + */
> +static struct pmbus_platform_data pli1209bc_plat_data = {
> + .flags = PMBUS_NO_CAPABILITY,
> +};
> +
> +static int pli1209bc_read_word_data(struct i2c_client *client, int page,
> + int phase, int reg)
> +{
> + int data;
> +
> + switch (reg) {
> + /* PMBUS_READ_POUT uses a direct format with R=0 */
> + case PMBUS_READ_POUT:
> + data = pmbus_read_word_data(client, page, phase, reg);
> + if (data < 0)
> + return data;
> + data = sign_extend32(data, 15) * 10;
> + return clamp_val(data, -32768, 32767) & 0xffff;
> + default:
> + return -ENODATA;
> + }
> +}
> +
> +static struct pmbus_driver_info pli1209bc_info = {
> + .pages = 2,
> + .format[PSC_VOLTAGE_IN] = direct,
> + .format[PSC_VOLTAGE_OUT] = direct,
> + .format[PSC_CURRENT_IN] = direct,
> + .format[PSC_CURRENT_OUT] = direct,
> + .format[PSC_POWER] = direct,
> + .format[PSC_TEMPERATURE] = direct,
> + .m[PSC_VOLTAGE_IN] = 1,
> + .b[PSC_VOLTAGE_IN] = 0,
> + .R[PSC_VOLTAGE_IN] = 1,
> + .m[PSC_VOLTAGE_OUT] = 1,
> + .b[PSC_VOLTAGE_OUT] = 0,
> + .R[PSC_VOLTAGE_OUT] = 1,
> + .m[PSC_CURRENT_IN] = 1,
> + .b[PSC_CURRENT_IN] = 0,
> + .R[PSC_CURRENT_IN] = 3,
> + .m[PSC_CURRENT_OUT] = 1,
> + .b[PSC_CURRENT_OUT] = 0,
> + .R[PSC_CURRENT_OUT] = 2,
> + .m[PSC_POWER] = 1,
> + .b[PSC_POWER] = 0,
> + .R[PSC_POWER] = 1,
> + .m[PSC_TEMPERATURE] = 1,
> + .b[PSC_TEMPERATURE] = 0,
> + .R[PSC_TEMPERATURE] = 0,
> + /*
> + * Page 0 sums up all attributes except voltage readings.
> + * The pli1209 digital supervisor only contains a single BCM, making
> + * page 0 redundant.
> + */
> + .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
> + | PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
> + | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
> + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
> + | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
> + .read_word_data = pli1209bc_read_word_data,
> +};
> +
> +static int pli1209bc_probe(struct i2c_client *client)
> +{
> + client->dev.platform_data = &pli1209bc_plat_data;
> + return pmbus_do_probe(client, &pli1209bc_info);
> +}
> +
> +static const struct i2c_device_id pli1209bc_id[] = {
> + {"pli1209bc", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, pli1209bc_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id pli1209bc_of_match[] = {
> + { .compatible = "vicor,pli1209bc" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, pli1209bc_of_match);
> +#endif
> +
> +static struct i2c_driver pli1209bc_driver = {
> + .driver = {
> + .name = "pli1209bc",
> + .of_match_table = of_match_ptr(pli1209bc_of_match),
> + },
> + .probe_new = pli1209bc_probe,
> + .id_table = pli1209bc_id,
> +};
> +
> +module_i2c_driver(pli1209bc_driver);
> +
> +MODULE_AUTHOR("Marcello Sylvester Bauer <sylv@...v.io>");
> +MODULE_DESCRIPTION("PMBus driver for Vicor PLI1209BC");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(PMBUS);
Powered by blists - more mailing lists