[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <f6af0e7becb42dcf5f52f797c81550bda81c73fb.camel@HansenPartnership.com>
Date: Sat, 19 Feb 2022 15:03:55 -0500
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] SCSI fixes for 5.17-rc4
Three fixes, all in drivers. The ufs and qedi fixes are minor; the
lpfc one is a bit bigger because it involves adding a heuristic to
detect and deal with common but not standards compliant behaviour.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
James Smart (1):
scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop
Jinyoung Choi (1):
scsi: ufs: core: Fix divide by zero in ufshcd_map_queues()
Mike Christie (1):
scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()
And the diffstat:
drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_attr.c | 3 +++
drivers/scsi/lpfc/lpfc_els.c | 20 +++++++++++++++++++-
drivers/scsi/lpfc/lpfc_nportdisc.c | 5 +++--
drivers/scsi/qedi/qedi_fw.c | 6 ++----
drivers/scsi/ufs/ufshcd.c | 2 +-
6 files changed, 29 insertions(+), 8 deletions(-)
With full diffs below.
James
---
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index a1e0a106c132..98cabe09c040 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -592,6 +592,7 @@ struct lpfc_vport {
#define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */
#define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */
#define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/
+#define FC_PT2PT_NO_NVME 0x1000 /* Don't send NVME PRLI */
#define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
#define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
#define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index bac78fbce8d6..fa8415259cb8 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1315,6 +1315,9 @@ lpfc_issue_lip(struct Scsi_Host *shost)
pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
pmboxq->u.mb.mbxOwner = OWN_HOST;
+ if ((vport->fc_flag & FC_PT2PT) && (vport->fc_flag & FC_PT2PT_NO_NVME))
+ vport->fc_flag &= ~FC_PT2PT_NO_NVME;
+
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
if ((mbxstatus == MBX_SUCCESS) &&
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index db5ccae1b63d..f936833c9909 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1072,7 +1072,8 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
/* FLOGI failed, so there is no fabric */
spin_lock_irq(shost->host_lock);
- vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
+ vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP |
+ FC_PT2PT_NO_NVME);
spin_unlock_irq(shost->host_lock);
/* If private loop, then allow max outstanding els to be
@@ -4607,6 +4608,23 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
/* Added for Vendor specifc support
* Just keep retrying for these Rsn / Exp codes
*/
+ if ((vport->fc_flag & FC_PT2PT) &&
+ cmd == ELS_CMD_NVMEPRLI) {
+ switch (stat.un.b.lsRjtRsnCode) {
+ case LSRJT_UNABLE_TPC:
+ case LSRJT_INVALID_CMD:
+ case LSRJT_LOGICAL_ERR:
+ case LSRJT_CMD_UNSUPPORTED:
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS,
+ "0168 NVME PRLI LS_RJT "
+ "reason %x port doesn't "
+ "support NVME, disabling NVME\n",
+ stat.un.b.lsRjtRsnCode);
+ retry = 0;
+ vport->fc_flag |= FC_PT2PT_NO_NVME;
+ goto out_retry;
+ }
+ }
switch (stat.un.b.lsRjtRsnCode) {
case LSRJT_UNABLE_TPC:
/* The driver has a VALID PLOGI but the rport has
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 7d717a4ac14d..fdf5e777bf11 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1961,8 +1961,9 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
* is configured try it.
*/
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
- if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
- (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
+ if ((!(vport->fc_flag & FC_PT2PT_NO_NVME)) &&
+ (vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH ||
+ vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
/* We need to update the localport also */
lpfc_nvme_update_localport(vport);
diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index 5916ed7662d5..4eb89aa4a39d 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -771,11 +771,10 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
qedi_cmd->list_tmf_work = NULL;
}
}
+ spin_unlock_bh(&qedi_conn->tmf_work_lock);
- if (!found) {
- spin_unlock_bh(&qedi_conn->tmf_work_lock);
+ if (!found)
goto check_cleanup_reqs;
- }
QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_SCSI_TM,
"TMF work, cqe->tid=0x%x, tmf flags=0x%x, cid=0x%x\n",
@@ -806,7 +805,6 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
qedi_cmd->state = CLEANUP_RECV;
unlock:
spin_unlock_bh(&conn->session->back_lock);
- spin_unlock_bh(&qedi_conn->tmf_work_lock);
wake_up_interruptible(&qedi_conn->wait_queue);
return;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 50b12d60dc1b..9349557b8a01 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2681,7 +2681,7 @@ static int ufshcd_map_queues(struct Scsi_Host *shost)
break;
case HCTX_TYPE_READ:
map->nr_queues = 0;
- break;
+ continue;
default:
WARN_ON_ONCE(true);
}
Powered by blists - more mailing lists