| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220221120746.GA3821785@anxtwsw-Precision-3640-Tower>
Date: Mon, 21 Feb 2022 20:07:46 +0800
From: Xin Ji <xji@...logixsemi.com>
To: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
bliang@...logixsemi.com, qwen@...logixsemi.com,
jli@...logixsemi.com, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org
Subject: Re: [PATCH v5 2/2] usb: typec: anx7411: Add Analogix PD ANX7411
support
On Tue, Feb 15, 2022 at 05:41:58PM +0200, Heikki Krogerus wrote:
> Hi,
>
> Where is patch 1/2 ?
Hi, please check 1/2 please check
https://patchwork.kernel.org/project/linux-usb/list/?series=612104
Thanks,
Xin
>
> On Tue, Feb 08, 2022 at 05:16:21PM +0800, Xin Ji wrote:
> > Add driver for analogix ANX7411 USB Type-C DRP port controller.
> >
> > Signed-off-by: Xin Ji <xji@...logixsemi.com>
> >
> > ---
> > V4 -> V5: Fix Greg h-k comment, remove DEBUG define
> > V3 -> V4: Fix compiling waring
> > V2 -> V3: Add changelog history
> > V1 -> V2: Fix compiling warning issue
> > ---
> > drivers/usb/typec/Kconfig | 11 +
> > drivers/usb/typec/Makefile | 1 +
> > drivers/usb/typec/anx7411.c | 1471 +++++++++++++++++++++++++++++++++++
> > drivers/usb/typec/anx7411.h | 271 +++++++
> > 4 files changed, 1754 insertions(+)
> > create mode 100644 drivers/usb/typec/anx7411.c
> > create mode 100644 drivers/usb/typec/anx7411.h
> >
> > diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> > index ab480f38523a..615183f46405 100644
> > --- a/drivers/usb/typec/Kconfig
> > +++ b/drivers/usb/typec/Kconfig
> > @@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig"
> >
> > source "drivers/usb/typec/tipd/Kconfig"
> >
> > +config TYPEC_ANX7411
> > + tristate "Analogix ANX7411 Type-C DRP Port controller driver"
> > + depends on I2C
> > + depends on USB_ROLE_SWITCH
> > + help
> > + Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
> > + controller driver.
> > +
> > + If you choose to build this driver as a dynamically linked module, the
> > + module will be called anx7411.ko.
> > +
> > config TYPEC_HD3SS3220
> > tristate "TI HD3SS3220 Type-C DRP Port controller driver"
> > depends on I2C
> > diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> > index a0adb8947a30..f4e7188f174a 100644
> > --- a/drivers/usb/typec/Makefile
> > +++ b/drivers/usb/typec/Makefile
> > @@ -5,6 +5,7 @@ obj-$(CONFIG_TYPEC) += altmodes/
> > obj-$(CONFIG_TYPEC_TCPM) += tcpm/
> > obj-$(CONFIG_TYPEC_UCSI) += ucsi/
> > obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
> > +obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o
> > obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
> > obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
> > obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
> > diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
> > new file mode 100644
> > index 000000000000..fb9adda037b5
> > --- /dev/null
> > +++ b/drivers/usb/typec/anx7411.c
> > @@ -0,0 +1,1471 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +
> > +/*
> > + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> > + *
> > + */
> > +#include <linux/gcd.h>
>
> Do you actually need that?
I'll remove it
>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of_gpio.h>
>
> And that?
Will remove it
>
> > +#include <linux/of_graph.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/slab.h>
> > +#include <linux/types.h>
> > +#include <linux/usb/pd.h>
> > +#include <linux/usb/role.h>
> > +#include <linux/usb/typec.h>
> > +#include <linux/usb/typec_dp.h>
> > +#include <linux/usb/typec_mux.h>
> > +#include <linux/workqueue.h>
> > +#include <linux/power_supply.h>
> > +
> > +#include "anx7411.h"
> > +
> > +static u8 snk_identity[] = {
> > + VENDOR_ID & 0xFF, (VENDOR_ID >> 8) & 0xFF, 0x00, 0x82, /* snk_id_hdr */
> > + 0x00, 0x00, 0x00, 0x00, /* snk_cert */
> > + 0x00, 0x00, PRODUCT_ID & 0xFF, (PRODUCT_ID >> 8) & 0xFF,/* 5snk_ama */
> > +};
>
> Hardcoded identity? I would have really expected that the firmware
> provides that thing.
>
> In any case, use the helpers from include/linux/usb/pd_vdo.h to fill
> that thing.
pd_vdo.h didn't have property data structure to declare.
>
> > +static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
>
> What is that?
This vdo used as snk, while DFP send "DP Discover Mode", anx7411 will
return this status to partner side.
>
> > +static int anx7411_reg_read(struct i2c_client *client,
> > + u8 reg_addr)
> > +{
> > + return i2c_smbus_read_byte_data(client, reg_addr);
> > +}
> > +
> > +static int anx7411_reg_block_read(struct i2c_client *client,
> > + u8 reg_addr, u8 len, u8 *buf)
> > +{
> > + return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
> > +}
> > +
> > +static int anx7411_reg_write(struct i2c_client *client,
> > + u8 reg_addr, u8 reg_val)
> > +{
> > + return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
> > +}
> > +
> > +static int anx7411_reg_block_write(struct i2c_client *client,
> > + u8 reg_addr, u8 len, u8 *buf)
> > +{
> > + return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
> > +}
> > +
> > +static struct anx7411_i2c_select anx7411_i2c_addr[] = {
> > + {TCPC_ADDRESS1, SPI_ADDRESS1},
> > + {TCPC_ADDRESS2, SPI_ADDRESS2},
> > + {TCPC_ADDRESS3, SPI_ADDRESS3},
> > + {TCPC_ADDRESS4, SPI_ADDRESS4},
> > +};
>
> What are those?
This is I2C address group, anx7411 support 4 group address.
>
> > +static int anx7411_detect_power_mode(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
>
>
> spi_client ?
it represent i2c registers device, this dummy I2C device created at
"anx7411_register_i2c_dummy_clients()"
>
> > + int ret;
> > + int mode;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
> > + if (ret < 0) {
> > + dev_info(dev, "failed to read request current.\n");
>
> dev_err()?
OK
>
> > + return ret;
> > + }
> > + ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
> > + if (ret < 0) {
> > + dev_info(dev, "failed to read voltage.\n");
>
> Ditto.
>
OK
> > + return ret;
> > + }
> > + ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
> > +
> > + if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
> > + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> > + power_supply_changed(ctx->psy);
> > + }
> > +
> > + if (!ctx->typec.cc_orientation_valid) {
> > + dev_info(dev, "cc orientation is 0(debug cable plug in).\n");
>
> That is just noise.
>
> What does cc_orientation_valid mean here? If it's just indicating is
> the connector in accessory mode, then why not name it like that?
Just check whether is accessory debug/audio cable.
>
> > + return 0;
> > + }
> > +
> > + if (ctx->typec.cc_connect == CC1_CONNECTED)
> > + mode = CC1_RP(ctx->typec.cc_status);
> > + else
> > + mode = CC2_RP(ctx->typec.cc_status);
> > + if (mode) {
> > + dev_info(dev, "set power opmode as %d.\n", mode - 1);
>
> More noise.
>
OK
> > + typec_set_pwr_opmode(ctx->typec.port, mode - 1);
> > + return 0;
> > + }
> > +
> > + typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_partner(struct anx7411_data *ctx,
> > + int pd, int accessory)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + struct typec_partner_desc desc;
> > +
> > + if (ctx->typec.partner) {
> > + dev_info(dev, "ignore register typec partner request.\n");
>
> Noise.
OK
>
> > + return 0;
> > + }
> > +
> > + dev_info(dev, "register typec partner port.\n");
>
> Noise.
OK
>
> > + desc.usb_pd = pd;
> > + desc.accessory = accessory;
> > + desc.identity = NULL;
> > + ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc);
> > + if (IS_ERR(ctx->typec.partner)) {
> > + dev_err(dev, "failed to register partner\n");
> > + ctx->typec.partner = NULL;
> > + return PTR_ERR(ctx->typec.partner);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_detect_cc_orientation(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > + int cc1_rd, cc2_rd;
> > + int cc1_ra, cc2_ra;
> > + int cc1_rp, cc2_rp;
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, CC_STATUS);
> > + if (ret < 0) {
> > + dev_info(dev, "failed to read cc status.\n");
>
> dev_err().
OK
>
> > + return ret;
> > + }
> > +
> > + dev_info(dev, "cc status %.02x\n", ret);
>
> Noise.
Remove
>
> > + ctx->typec.cc_status = ret;
> > +
> > + cc1_rd = ret & CC1_RD ? 1 : 0;
> > + cc2_rd = ret & CC2_RD ? 1 : 0;
> > + cc1_ra = ret & CC1_RA ? 1 : 0;
> > + cc2_ra = ret & CC2_RA ? 1 : 0;
>
> Do you need all of those here?
>
> cc_rd = !!((ret & CC1_RD) || (ret & CC2_RD))
> cc_ra = !!((ret & CC1_RA) || (ret & CC2_RA))
need these value to check whether partner device is Accessory
debug/audio cable.
>
> > + cc1_rp = CC1_RP(ret);
> > + cc2_rp = CC2_RP(ret);
> > +
> > + /* Debug cable, nothing to do */
> > + if (cc1_rd && cc2_rd) {
> > + ctx->typec.cc_orientation_valid = 0;
> > + anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG);
> > + return 0;
> > + }
> > +
> > + if (cc1_ra && cc2_ra) {
> > + ctx->typec.cc_orientation_valid = 0;
> > + anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO);
> > + return 0;
> > + }
> > +
> > + ctx->typec.cc_orientation_valid = 1;
> > +
> > + anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE);
> > +
> > + if (cc1_rd || cc1_rp) {
> > + dev_info(dev, "set orientation to normal\n");
>
> Noise.
Remove
>
> > + typec_set_orientation(ctx->typec.port,
> > + TYPEC_ORIENTATION_NORMAL);
> > + ctx->typec.cc_connect = CC1_CONNECTED;
> > + }
> > +
> > + if (cc2_rd || cc2_rp) {
> > + dev_info(dev, "set orientation to reverse\n");
>
> Noise.
Remove
>
> > + typec_set_orientation(ctx->typec.port,
> > + TYPEC_ORIENTATION_REVERSE);
> > + ctx->typec.cc_connect = CC2_CONNECTED;
> > + }
> > +
> > + dev_info(dev, "cc1_rp(%d), cc2_rp(%d)", cc1_rp, cc2_rp);
> > + dev_info(dev, "\tcc1_rd(%d), cc2_rd(%d), cc_connected(%d).\n",
> > + cc1_rd, cc2_rd, ctx->typec.cc_connect);
>
> Noise!
>
> I'll stop commenting on the dev_info() lines. You need to drop
> all of them.
OK, I'll remove it.
>
> > + return 0;
> > +}
> > +
> > +static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment)
> > +{
> > + int mode = TYPEC_STATE_SAFE;
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + switch (pin_assignment) {
> > + case SELECT_PIN_ASSIGMENT_U:
> > + /* default 4 line USB 3.1 */
> > + mode = TYPEC_STATE_MODAL;
> > + break;
> > + case SELECT_PIN_ASSIGMENT_C:
> > + case SELECT_PIN_ASSIGMENT_E:
> > + /* 4 line DP */
> > + mode = TYPEC_STATE_SAFE;
> > + break;
> > + case SELECT_PIN_ASSIGMENT_D:
> > + /* 2 line DP, 2 line USB */
> > + mode = TYPEC_MODE_USB3;
> > + break;
> > + default:
> > + mode = TYPEC_STATE_SAFE;
> > + break;
> > + }
> > +
> > + ctx->typec.pin_assignment = pin_assignment;
> > +
> > + dev_info(dev, "pin assignment %d, mux mode %d.\n",
> > + pin_assignment, mode);
> > +
> > + return typec_set_mode(ctx->typec.port, mode);
> > +}
> > +
> > +static void anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + if (!ctx->typec.role_sw) {
> > + dev_info(dev, "no usb role switch");
> > + return;
> > + }
> > +
> > + usb_role_switch_set_role(ctx->typec.role_sw, role);
> > +}
> > +
> > +static int anx7411_data_role_detect(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
> > + if (ret < 0) {
> > + dev_err(dev, "read system status failed: %d.\n", ret);
> > + return ret;
> > + }
> > +
> > + ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
> > + ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK;
> > +
> > + typec_set_data_role(ctx->typec.port, ctx->typec.data_role);
> > + typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role);
> > +
> > + if (ctx->typec.data_role == TYPEC_HOST)
> > + anx7411_set_usb_role(ctx, USB_ROLE_HOST);
> > + else
> > + anx7411_set_usb_role(ctx, USB_ROLE_DEVICE);
> > +
> > + dev_info(dev, "data role change, status(0x%.02x), data role(%d)\n",
> > + ret, ctx->typec.data_role);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_power_role_detect(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
> > + if (ret < 0) {
> > + dev_err(dev, "read system status failed: %d.\n", ret);
> > + return ret;
> > + }
> > +
> > + ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
> > +
> > + if (ctx->typec.power_role == TYPEC_SOURCE) {
> > + ctx->typec.request_current = DEF_1_5A;
> > + ctx->typec.request_voltage = DEF_5V;
> > + }
> > +
> > + dev_info(dev, "power role change, status(0x%.02x), power role(%d).\n",
> > + ret, ctx->typec.power_role);
> > + typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_cc_status_detect(struct anx7411_data *ctx)
> > +{
> > + anx7411_detect_cc_orientation(ctx);
> > + anx7411_detect_power_mode(ctx);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_partner_unregister_altmode(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + int i;
> > +
> > + dev_info(dev, "unregister typec altmode.\n");
> > +
> > + ctx->typec.dp_altmode_enter = 0;
> > + ctx->typec.cust_altmode_enter = 0;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++)
> > + if (ctx->typec.amode[i]) {
> > + typec_unregister_altmode(ctx->typec.amode[i]);
> > + ctx->typec.amode[i] = NULL;
> > + }
> > +
> > + ctx->typec.pin_assignment = 0;
> > + return 0;
> > +}
> > +
> > +static int anx7411_typec_register_altmode(struct anx7411_data *ctx,
> > + int svid, int vdo)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + struct typec_altmode_desc desc;
> > + int i;
> > +
> > + dev_info(dev, "register typec altmode -> vdo = 0x%x.\n", vdo);
> > + desc.svid = svid;
> > + desc.vdo = vdo;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++)
> > + if (!ctx->typec.amode[i])
> > + break;
> > +
> > + desc.mode = i + 1; /* start with 1 */
> > +
> > + if (i >= MAX_ALTMODE) {
> > + dev_info(dev, "no altmode space for registering\n");
> > + return -ENOMEM;
> > + }
> > +
> > + ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner,
> > + &desc);
> > + if (IS_ERR(ctx->typec.amode[i])) {
> > + dev_err(dev, "failed to register altmode\n");
> > + ctx->typec.amode[i] = NULL;
> > + return PTR_ERR(ctx->typec.amode);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_unregister_partner(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + dev_info(dev, "unregister typec partner port.\n");
> > + if (ctx->typec.partner) {
> > + typec_unregister_partner(ctx->typec.partner);
> > + ctx->typec.partner = NULL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_update_altmode(struct anx7411_data *ctx, int svid)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + int i;
> > +
> > + dev_info(dev, "update typec altmode to true.\n");
> > +
> > + if (svid == DP_SVID)
> > + ctx->typec.dp_altmode_enter = 1;
> > + else
> > + ctx->typec.cust_altmode_enter = 1;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++) {
> > + if (!ctx->typec.amode[i])
> > + continue;
> > +
> > + if (ctx->typec.amode[i]->svid == svid) {
> > + typec_altmode_update_active(ctx->typec.amode[i], true);
> > + typec_altmode_notify(ctx->typec.amode[i],
> > + ctx->typec.pin_assignment,
> > + &ctx->typec.data);
> > + break;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_altmode(struct anx7411_data *ctx,
> > + bool dp_altmode, u8 *buf)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + int ret;
> > + int svid;
> > + int mid;
> > +
> > + if (!ctx->typec.partner) {
> > + dev_info(dev, "partner not register yet, ignore altmode(%d)\n",
> > + dp_altmode);
> > + return 0;
> > + }
> > +
> > + svid = DP_SVID;
> > + if (dp_altmode) {
> > + dev_info(dev, "register DP altmode\n");
> > + mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
> > +
> > + return anx7411_typec_register_altmode(ctx, svid, mid);
> > + }
> > +
> > + svid = (buf[3] << 8) | buf[2];
> > + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE)) {
> > + dev_info(dev, "svid(0x%x) enter mode\n", svid);
> > + return anx7411_update_altmode(ctx, svid);
> > + }
> > +
> > + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD)) {
> > + dev_info(dev, "ignore VDM message 0x%.02x%.02x\n",
> > + buf[0], buf[1]);
> > + return 0;
> > + }
> > +
> > + mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
> > +
> > + ret = anx7411_typec_register_altmode(ctx, svid, mid);
> > + if (ctx->typec.cust_altmode_enter)
> > + ret |= anx7411_update_altmode(ctx, svid);
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + u8 cur_50ma, vol_100mv;
> > +
> > + dev_info(dev, "received message: type:0x%.02x, len:%d, buf[0]:%d\n",
> > + type, len, buf[0]);
> > +
> > + switch (type) {
> > + case TYPE_SRC_CAP:
> > + cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
> > + vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
> > + dev_info(dev, "get current(%dma), voltage(%dmv), power(%dmw)\n",
> > + cur_50ma * CURRENT_UNIT, vol_100mv * VOLTAGE_UNIT,
> > + cur_50ma * vol_100mv * 5);
> > +
> > + ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT;
> > + ctx->typec.request_current = cur_50ma * CURRENT_UNIT;
> > +
> > +#ifndef CUST_SINK_CTRL_EN
> > + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> > + power_supply_changed(ctx->psy);
>
> I can not find that definition anywhere, which means this is dead
> block. Please drop this code, and the ifdef with it. Do the same for
> the other places where use the definition too.
OK
>
> > +#else
> > + /* Enable OCM automatically control sink_ctrl pin*/
> > + dev_info(dev, "Enable OCM auto control sink_ctrl pin\n");
> > + anx7411_reg_write(ctx->tcpc_client, FW_CTRL_2,
> > + anx7411_reg_read(ctx->tcpc_client, FW_CTRL_2) &
> > + ~SINK_CTRL_DIS_FLAG);
> > + if (vol_100mv != REQ_VOL_20V_IN_100MV)
> > + break;
> > +
> > + if (cur_50ma != REQ_CUR_2_25A_IN_50MA &&
> > + cur_50ma != REQ_CUR_3_25A_IN_50MA)
> > + break;
> > +
> > + /* Disable OCM automatically control sink_ctrl pin*/
> > + dev_info(dev, "Disable OCM auto control sink_ctrl pin\n");
> > + anx7411_reg_write(ctx->tcpc_client, FW_CTRL_2,
> > + anx7411_reg_read(ctx->tcpc_client, FW_CTRL_2) |
> > + SINK_CTRL_DIS_FLAG);
> > +
> > + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> > + power_supply_changed(ctx->psy);
> > +#endif
> > + break;
> > + case TYPE_SNK_CAP:
> > + break;
> > + case TYPE_SVID:
> > + break;
> > + case TYPE_SNK_IDENTITY:
> > + break;
> > + case TYPE_GET_DP_ALT_ENTER:
> > + /* DP alt mode enter success */
> > + if (buf[0])
> > + anx7411_update_altmode(ctx, DP_SVID);
> > + break;
> > + case TYPE_DP_ALT_ENTER:
> > + /* Update DP altmode */
> > + anx7411_update_altmode(ctx, DP_SVID);
> > + break;
> > + case TYPE_OBJ_REQ:
> > + anx7411_detect_power_mode(ctx);
> > + break;
> > + case TYPE_DP_CONFIGURE:
> > + anx7411_set_mux(ctx, buf[1]);
> > + break;
> > + case TYPE_DP_DISCOVER_MODES_INFO:
> > + /* Make sure discover modes valid */
> > + if (buf[0] | buf[1])
> > + /* Register DP Altmode */
> > + anx7411_register_altmode(ctx, 1, buf);
> > + break;
> > + case TYPE_VDM:
> > + /* Register other altmode */
> > + anx7411_register_altmode(ctx, 0, buf);
> > + break;
> > + default:
> > + dev_info(dev, "ignore message(0x%.02x).\n", type);
> > + break;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static u8 checksum(struct device *dev, u8 *buf, u8 len)
> > +{
> > + u8 ret;
> > + u8 i;
> > +
> > + ret = 0;
>
> u8 ret = 0;
OK
>
> > + for (i = 0; i < len; i++)
> > + ret += buf[i];
> > +
> > + return ret;
> > +}
>
> This looks like some kind of a helper for something (not sure for
> what yet). You don't need to pass the device to it since you are not
> using it.
The crc is not compatible with kernel crc.
>
> > +static int anx7411_read_msg_ctrl_status(struct i2c_client *client)
> > +{
> > + return anx7411_reg_read(client, CMD_SEND_BUF);
> > +}
> > +
> > +static int anx7411_wait_msg_empty(struct i2c_client *client)
> > +{
> > + struct device *dev = &client->dev;
> > + int ret, val;
> > +
> > + ret = readx_poll_timeout(anx7411_read_msg_ctrl_status,
> > + client, val, (val < 0) || (val == 0),
> > + 2000, 2000 * 150);
> > + if (ret)
> > + dev_info(dev, "msg buffer busy\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + u8 msg[MSG_LEN];
> > + u8 crc;
> > + int ret;
> > +
> > + if (size)
> > + memcpy(&msg[MSG_RAWDATA], buf, size);
> > + msg[MSG_TYPE] = type;
> > + msg[MSG_HEADER] = size + 1;
> > +
> > + crc = checksum(dev, msg, size + HEADER_LEN);
> > + msg[size + HEADER_LEN] = 0 - crc;
>
> That looks a bit odd...
>
> What is the checksum here? We have build-in crc function in kernel.
> Can't you use those?
Here we just used simple 8 bit crc checksum, not compatible with kernel
crc library.
>
> > + ret = anx7411_wait_msg_empty(ctx->spi_client);
> > + if (ret) {
> > + dev_info(dev, "firmware busy, ret(0x%.02x)\n", ret);
> > + return ret;
> > + }
> > +
> > + anx7411_reg_block_write(ctx->spi_client,
> > + CMD_SEND_BUF + 1, size + HEADER_LEN,
> > + &msg[MSG_TYPE]);
> > + return anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF,
> > + msg[MSG_HEADER]);
> > +}
> > +
> > +static int anx7411_process_cmd(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + u8 msg[MSG_LEN];
> > + u8 len;
> > + u8 crc;
> > +
> > + /* Read message from firmware */
> > + anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF, MSG_LEN, msg);
> > + anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
> > +
> > + if (!msg[MSG_HEADER]) {
> > + dev_info(dev, "message empty\n");
> > + return 0;
> > + }
> > +
> > + len = msg[MSG_HEADER] & MSG_LEN_MASK;
> > + crc = checksum(dev, msg, len + HEADER_LEN);
> > + if (crc) {
> > + dev_err(dev, "message error crc(0x%.02x)\n", crc);
> > + return -1;
>
> What does -1 mean here?
I'll change it.
>
> > + }
> > +
> > + return anx7411_parse_cmd(ctx, msg[MSG_TYPE],
> > + &msg[MSG_RAWDATA], len - 1);
> > +}
> > +
> > +static void anx7411_translate_payload(struct device *dev, __le32 *payload,
> > + u32 *pdo, int nr, const char *type)
> > +{
> > + int i;
> > +
> > + dev_info(dev, "convert %s pdos to little endian format\n", type);
> > + if (nr > PDO_MAX_OBJECTS) {
> > + dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
> > + nr, PDO_MAX_OBJECTS);
> > +
> > + return;
> > + }
> > +
> > + for (i = 0; i < nr; i++)
> > + payload[i] = cpu_to_le32(pdo[i]);
> > +}
> > +
> > +static void anx7411_config(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + struct typec_params *typecp = &ctx->typec;
> > + __le32 payload[PDO_MAX_OBJECTS];
> > +
> > + dev_info(dev, "initial anx7411\n");
> > + /* Config PD FW work under PD 2.0 */
> > + anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
> > + anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
> > + UNSTRUCT_VDM_EN | DELAY_200MS |
> > + VSAFE1 | FRS_EN);
> > + anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
> > + AUTO_PD_EN | FORCE_SEND_RDO);
> > +
> > + /* Set VBUS current threshold */
> > + anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff);
> > + anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03);
> > +
> > + /* Fix dongle compatible issue */
> > + anx7411_reg_write(ctx->tcpc_client, FW_PARAM,
> > + anx7411_reg_read(ctx->tcpc_client, FW_PARAM) |
> > + DONGLE_IOP);
> > + anx7411_reg_write(ctx->spi_client, INT_MASK, 0);
> > +
> > + anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF);
> > +
> > + if (typecp->caps_flags & HAS_SOURCE_CAP) {
> > + anx7411_translate_payload(dev, payload, typecp->src_pdo,
> > + typecp->src_pdo_nr, "source");
> > + anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload,
> > + typecp->src_pdo_nr * 4);
> > + anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity,
> > + sizeof(snk_identity));
> > + anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps,
> > + sizeof(dp_caps));
> > + }
> > +
> > + if (typecp->caps_flags & HAS_SINK_CAP) {
> > + anx7411_translate_payload(dev, payload, typecp->sink_pdo,
> > + typecp->sink_pdo_nr, "sink");
> > + anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload,
> > + typecp->sink_pdo_nr * 4);
> > + }
> > +
> > + if (typecp->caps_flags & HAS_SINK_WATT) {
> > + if (typecp->sink_watt) {
> > + anx7411_reg_write(ctx->spi_client, MAX_POWER,
> > + typecp->sink_watt);
> > + /* Set min power to 1W */
> > + anx7411_reg_write(ctx->spi_client, MIN_POWER, 2);
> > + }
> > +
> > + if (typecp->sink_voltage)
> > + anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE,
> > + typecp->sink_voltage);
> > + }
> > +
> > + if (!typecp->caps_flags)
> > + usleep_range(5000, 6000);
> > +
> > + ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER);
> > + ctx->fw_subversion = anx7411_reg_read(ctx->spi_client,
> > + FW_SUBVER);
> > + dev_info(dev, "power on, ocm version %.02x%.02x\n",
> > + ctx->fw_version, ctx->fw_subversion);
> > +}
> > +
> > +static void anx7411_chip_standby(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->tcpc_client->dev;
> > +
> > + dev_info(dev, "Anx7411 enter into standby mode.\n");
> > +
> > + anx7411_reg_write(ctx->spi_client, OCM_CTRL_0,
> > + anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) |
> > + OCM_RESET);
> > + anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80);
> > + /* Set TCPC to RD and DRP enable */
> > + anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CONTROL, 0x4A);
> > + /* Send DRP toggle command */
> > + anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, 0x99);
>
> So that would be Look4Connection command, no?
Yes it is Look4Connection command
>
> > + /* Send TCPC enter standby command */
> > + anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, 0xFF);
>
> And that is the I2C Idle command.
>
> Those commands are already defined in drivers/usb/typec/tcpm/tcpci.h.
> I would really prefer that we use the same definitions everywhere. We
> probable should have them in a file include/linux/usb/tcpci.h.
The tcpci.h is not in include/linux/usb/tcpci.h, it exist at
drivers/usb/typec/tcpm/tcpci.h
>
> > +}
> > +
> > +static void anx7411_work_func(struct work_struct *work)
> > +{
> > + int ret;
> > + u8 buf[STATUS_LEN];
> > + u8 int_change, int_status, alert0, alert1;
>
> Sorry to be picky here, but it would be easier to read this code if
> you introduced each of those registers on its own line. And please try
> to use the same style also when introducing the variable in every
> function.
These are interrupt status registers.
>
> > + struct anx7411_data *ctx = container_of(work,
> > + struct anx7411_data, work);
>
> One line is enough here.
OK
>
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + mutex_lock(&ctx->lock);
> > +
> > + /* Read interrupt change status */
> > + ret = anx7411_reg_block_read(ctx->spi_client, INT_STS,
> > + STATUS_LEN, buf);
>
> Ditto.
OK
>
> > + if (ret < 0) {
> > + /* Power standby mode, just return */
> > + goto unlock;
> > + }
> > + int_change = buf[0];
> > + int_status = buf[1];
> > +
> > + /* Read alert register */
> > + ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0,
> > + STATUS_LEN, buf);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to read register(%d)\n", ALERT_0);
> > + goto unlock;
> > + }
> > + alert0 = buf[0];
> > + alert1 = buf[1];
> > +
> > + /* Clear interrupt and alert status */
> > + anx7411_reg_write(ctx->spi_client, INT_STS, 0);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1);
> > +
> > + dev_info(dev, "int_change(0x%.02x), int_status(0x%.02x).\n",
> > + int_change, int_status);
> > + dev_info(dev, "alert0(0x%.02x), alert1(0x%.02x).\n", alert0, alert1);
> > +
> > + if (alert1 & INTP_POW_OFF) {
> > + anx7411_partner_unregister_altmode(ctx);
> > + anx7411_set_usb_role(ctx, USB_ROLE_NONE);
> > + anx7411_unregister_partner(ctx);
> > + ctx->psy_online = ANX7411_PSY_OFFLINE;
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
> > + ctx->typec.request_voltage = 0;
> > + ctx->typec.request_current = 0;
> > + power_supply_changed(ctx->psy);
> > + anx7411_chip_standby(ctx);
> > + goto unlock;
> > + }
> > +
> > + if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) {
> > + anx7411_config(ctx);
> > + anx7411_data_role_detect(ctx);
> > + anx7411_power_role_detect(ctx);
> > + anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
> > + }
> > +
> > + if (alert0 & RECEIVED_MSG)
> > + anx7411_process_cmd(ctx);
> > +
> > + ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
> > + if (ctx->typec.data_role != ret)
> > + anx7411_data_role_detect(ctx);
> > +
> > + ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
> > + if (ctx->typec.power_role != ret)
> > + anx7411_power_role_detect(ctx);
> > +
> > + if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE))
> > + anx7411_cc_status_detect(ctx);
> > +
> > +unlock:
> > + mutex_unlock(&ctx->lock);
> > +}
> > +
> > +static irqreturn_t anx7411_intr_isr(int irq, void *data)
> > +{
> > + struct anx7411_data *ctx = (struct anx7411_data *)data;
> > +
> > + queue_work(ctx->workqueue, &ctx->work);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx,
> > + struct i2c_client *client)
> > +{
> > + int i;
> > + u8 spi_addr;
> > +
> > + for (i = 0; i < sizeof(anx7411_i2c_addr); i++) {
> > + if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) {
> > + spi_addr = anx7411_i2c_addr[i].spi_address >> 1;
> > + ctx->spi_client = i2c_new_dummy_device(client->adapter,
> > + spi_addr);
> > + if (ctx->spi_client) {
> > + dev_info(&client->dev, "found spi slave\n");
> > + return 0;
> > + }
> > + }
> > + }
> > +
> > + dev_err(&client->dev, "unable to get SPI slave\n");
> > + return -ENOMEM;
> > +}
>
> To which bus is the device actually attached to, SPI or I2C?
>
> I'm not sure I understand what is going on here?
I2C bus, our internal named this 256 registers as spi space(these
register attached on internal SPI bus, so we named it spi_client)
>
> > +static void anx7411_port_unregister_altmodes(struct typec_altmode **adev)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++)
> > + if (adev[i]) {
> > + typec_unregister_altmode(adev[i]);
> > + adev[i] = NULL;
> > + }
> > +}
> > +
> > +static int anx7411_usb_mux_set(struct typec_mux *mux,
> > + struct typec_mux_state *state)
> > +{
> > + struct anx7411_data *ctx = typec_mux_get_drvdata(mux);
> > + struct device *dev = &ctx->spi_client->dev;
> > + int has_dp;
> > +
> > + has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
> > + state->alt->mode == USB_TYPEC_DP_MODE);
> > + dev_info(dev, "callback: mux set: %d", has_dp);
> > + if (!has_dp) {
> > + dev_info(dev, "dp altmode not register\n");
> > + return 0;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_usb_set_orientation(struct typec_switch *sw,
> > + enum typec_orientation orientation)
> > +{
> > + struct anx7411_data *ctx = typec_switch_get_drvdata(sw);
> > + struct device *dev = &ctx->spi_client->dev;
> > +
> > + dev_info(dev, "callback: orientation set %d\n", orientation);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_switch(struct anx7411_data *ctx,
> > + struct device *dev,
> > + struct fwnode_handle *fwnode)
> > +{
> > + struct typec_switch_desc sw_desc = { };
> > +
> > + sw_desc.fwnode = fwnode;
> > + sw_desc.drvdata = ctx;
> > + sw_desc.name = fwnode_get_name(fwnode);
> > + sw_desc.set = anx7411_usb_set_orientation;
> > +
> > + ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc);
> > + if (IS_ERR(ctx->typec.typec_switch)) {
> > + dev_err(dev, "switch register failed\n");
> > + return PTR_ERR(ctx->typec.typec_switch);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_mux(struct anx7411_data *ctx,
> > + struct device *dev,
> > + struct fwnode_handle *fwnode)
> > +{
> > + struct typec_mux_desc mux_desc = { };
> > +
> > + mux_desc.fwnode = fwnode;
> > + mux_desc.drvdata = ctx;
> > + mux_desc.name = fwnode_get_name(fwnode);
> > + mux_desc.set = anx7411_usb_mux_set;
> > +
> > + ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc);
> > + if (IS_ERR(ctx->typec.typec_mux)) {
> > + dev_err(dev, "mux register failed\n");
> > + return PTR_ERR(ctx->typec.typec_mux);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void anx7411_unregister_mux(struct anx7411_data *ctx)
> > +{
> > + if (ctx->typec.typec_mux) {
> > + typec_mux_unregister(ctx->typec.typec_mux);
> > + ctx->typec.typec_mux = NULL;
> > + }
> > +}
> > +
> > +static void anx7411_unregister_switch(struct anx7411_data *ctx)
> > +{
> > + if (ctx->typec.typec_switch) {
> > + typec_switch_unregister(ctx->typec.typec_switch);
> > + ctx->typec.typec_switch = NULL;
> > + }
> > +}
> > +
> > +static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
> > + struct device *dev)
> > +{
> > + int ret;
> > + struct device_node *node;
> > +
> > + node = of_find_node_by_name(dev->of_node, "orientation_switch");
> > + if (!node) {
> > + dev_info(dev, "no typec switch exist\n");
> > + return 0;
> > + }
> > +
> > + dev_info(dev, "register switch\n");
> > + ret = anx7411_register_switch(ctx, dev, &node->fwnode);
> > + if (ret) {
> > + dev_err(dev, "failed register switch");
> > + return ret;
> > + }
> > +
> > + node = of_find_node_by_name(dev->of_node, "mode_switch");
> > + if (!node) {
> > + dev_err(dev, "no typec mux exist");
> > + ret = -ENODEV;
> > + goto unregister_switch;
> > + }
> > +
> > + dev_info(dev, "register mode switch\n");
> > + ret = anx7411_register_mux(ctx, dev, &node->fwnode);
> > + if (ret) {
> > + dev_err(dev, "failed register mode switch");
> > + ret = -ENODEV;
> > + goto unregister_switch;
> > + }
> > +
> > + return 0;
> > +
> > +unregister_switch:
> > + anx7411_unregister_switch(ctx);
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_typec_port_probe(struct anx7411_data *ctx,
> > + struct device *dev)
> > +{
> > + struct typec_capability *cap = &ctx->typec.caps;
> > + struct typec_params *typecp = &ctx->typec;
> > + struct fwnode_handle *fwnode;
> > + const char *buf;
> > + int ret, i;
> > +
> > + fwnode = device_get_named_child_node(dev, "connector");
> > + if (!fwnode)
> > + return -EINVAL;
> > +
> > + ret = fwnode_property_read_string(fwnode, "power-role", &buf);
> > + if (ret) {
> > + dev_err(dev, "power-role not found: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = typec_find_port_power_role(buf);
> > + if (ret < 0)
> > + return ret;
> > + cap->type = ret;
> > +
> > + ret = fwnode_property_read_string(fwnode, "data-role", &buf);
> > + if (ret) {
> > + dev_err(dev, "data-role not found: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = typec_find_port_data_role(buf);
> > + if (ret < 0)
> > + return ret;
> > + cap->data = ret;
> > +
> > + ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
> > + if (ret) {
> > + dev_err(dev, "try-power-role not found: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = typec_find_power_role(buf);
> > + if (ret < 0)
> > + return ret;
> > + cap->prefer_role = ret;
> > +
> > + /* Get source pdos */
> > + ret = fwnode_property_count_u32(fwnode, "source-pdos");
> > + if (ret > 0) {
> > + dev_info(dev, "%d source-pdos found\n", ret);
> > + typecp->src_pdo_nr = min(ret, PDO_MAX_OBJECTS);
> > + ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> > + typecp->src_pdo,
> > + typecp->src_pdo_nr);
> > + if (ret < 0) {
> > + dev_err(dev, "source cap validate failed: %d\n", ret);
> > + return -EINVAL;
> > + }
> > +
> > + typecp->caps_flags |= HAS_SOURCE_CAP;
> > + }
> > +
> > + ret = fwnode_property_count_u32(fwnode, "sink-pdos");
> > + if (ret > 0) {
> > + dev_info(dev, "%d sink-pdos found\n", ret);
> > + typecp->sink_pdo_nr = min(ret, PDO_MAX_OBJECTS);
> > + ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
> > + typecp->sink_pdo,
> > + typecp->sink_pdo_nr);
> > + if (ret < 0) {
> > + dev_err(dev, "sink cap validate failed: %d\n", ret);
> > + return -EINVAL;
> > + }
> > +
> > + for (i = 0; i < typecp->sink_pdo_nr; i++) {
> > + ret = 0;
> > + switch (pdo_type(typecp->sink_pdo[i])) {
> > + case PDO_TYPE_FIXED:
> > + ret = pdo_fixed_voltage(typecp->sink_pdo[i]);
> > + break;
> > + case PDO_TYPE_BATT:
> > + case PDO_TYPE_VAR:
> > + ret = pdo_max_voltage(typecp->sink_pdo[i]);
> > + break;
> > + case PDO_TYPE_APDO:
> > + default:
> > + ret = 0;
> > + break;
> > + }
> > +
> > + /* 100mv per unit */
> > + typecp->sink_voltage = max(5000, ret) / 100;
> > + }
> > +
> > + typecp->caps_flags |= HAS_SINK_CAP;
> > + }
> > +
> > + if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) {
> > + dev_info(dev, "%d sink-microwat found\n", ret);
> > + typecp->sink_watt = ret / 500000; /* 500mw per unit */
> > + typecp->caps_flags |= HAS_SINK_WATT;
> > + }
> > +
> > + cap->fwnode = fwnode;
> > +
> > + ctx->typec.role_sw = usb_role_switch_get(dev);
> > + if (IS_ERR(ctx->typec.role_sw)) {
> > + dev_err(dev, "USB role switch not found.\n");
> > + ctx->typec.role_sw = NULL;
> > + }
> > +
> > + ctx->typec.port = typec_register_port(dev, cap);
> > + if (IS_ERR(ctx->typec.port)) {
> > + ret = PTR_ERR(ctx->typec.port);
> > + ctx->typec.port = NULL;
> > + dev_err(dev, "Failed to register type c port %d\n", ret);
> > + return ret;
> > + }
> > +
> > + typec_port_register_altmodes(ctx->typec.port, NULL, ctx,
> > + ctx->typec.port_amode,
> > + MAX_ALTMODE);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_typec_check_connection(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + int ret;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, FW_VER);
> > + if (ret < 0) {
> > + /* No device attached in typec port */
> > + dev_info(dev, "no connection detect.\n");
> > + return 0;
> > + }
> > +
> > + dev_info(dev, "detected typec connected, ocm ver:0x%.02x.\n", ret);
> > + dev_info(dev, "force clear interrupt and alert.\n");
> > + /* Clear interrupt and alert status */
> > + anx7411_reg_write(ctx->spi_client, INT_STS, 0);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF);
> > +
> > + anx7411_cc_status_detect(ctx);
> > +
> > + anx7411_power_role_detect(ctx);
> > +
> > + dev_info(dev, "PD %s voltage(%d), current(%d).\n",
> > + ctx->typec.power_role == TYPEC_SOURCE ? "supply" : "request",
> > + ctx->typec.request_voltage, ctx->typec.request_current);
> > +
> > + anx7411_data_role_detect(ctx);
> > +
> > + anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
> > +
> > + anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0);
> > +
> > + anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev)
> > +{
> > + struct anx7411_data *ctx = dev_get_drvdata(dev);
> > +
> > + mutex_lock(&ctx->lock);
> > +
> > + anx7411_partner_unregister_altmode(ctx);
> > +
> > + if (ctx->typec.partner)
> > + anx7411_unregister_partner(ctx);
> > +
> > + mutex_unlock(&ctx->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev)
> > +{
> > + struct anx7411_data *ctx = dev_get_drvdata(dev);
> > +
> > + mutex_lock(&ctx->lock);
> > + /* Detect PD connection */
> > + anx7411_typec_check_connection(ctx);
> > +
> > + mutex_unlock(&ctx->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops anx7411_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> > + pm_runtime_force_resume)
> > + SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend,
> > + anx7411_runtime_pm_resume, NULL)
> > +};
> > +
> > +static void anx7411_get_gpio_irq(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->tcpc_client->dev;
> > +
> > + ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN);
> > + if (!ctx->intp_gpiod) {
> > + dev_info(dev, "no interrupt gpio property\n");
> > + return;
> > + }
> > +
> > + ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod);
> > + dev_info(dev, "request gpio(%d) irq(%d)\n",
> > + desc_to_gpio(ctx->intp_gpiod), ctx->intp_irq);
> > +
> > + if (!ctx->intp_irq)
> > + dev_err(dev, "failed to get GPIO IRQ\n");
> > +}
> > +
> > +static const char *anx7411_psy_name_prefix = "anx7411-source-psy-";
> > +
> > +static enum power_supply_usb_type anx7411_psy_usb_types[] = {
> > + POWER_SUPPLY_USB_TYPE_C,
> > + POWER_SUPPLY_USB_TYPE_PD,
> > + POWER_SUPPLY_USB_TYPE_PD_PPS,
> > +};
> > +
> > +static enum power_supply_property anx7411_psy_props[] = {
> > + POWER_SUPPLY_PROP_USB_TYPE,
> > + POWER_SUPPLY_PROP_ONLINE,
> > + POWER_SUPPLY_PROP_VOLTAGE_MIN,
> > + POWER_SUPPLY_PROP_VOLTAGE_MAX,
> > + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_MAX,
> > + POWER_SUPPLY_PROP_CURRENT_NOW,
> > +};
> > +
> > +static int anx7411_psy_set_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + const union power_supply_propval *val)
> > +{
> > + struct anx7411_data *ctx = power_supply_get_drvdata(psy);
> > + int ret = 0;
> > +
> > + if (psp == POWER_SUPPLY_PROP_ONLINE) {
> > + pr_info("[DEBUG] set prop -> %d\n", val->intval);
> > + ctx->psy_online = val->intval;
> > +#ifdef CUST_SINK_CTRL_EN
> > + if (ctx->psy_online == ANX7411_PSY_HANG)
> > + anx7411_reg_write(ctx->tcpc_client,
> > + TCPC_COMMAND,
> > + SINK_CTRL_DIS);
> > + else if (ctx->psy_online)
> > + anx7411_reg_write(ctx->tcpc_client,
> > + TCPC_COMMAND,
> > + SINK_CTRL_EN);
> > +#endif
> > + } else {
> > + ret = -EINVAL;
> > + }
> > +
> > + power_supply_changed(ctx->psy);
> > + return ret;
> > +}
> > +
> > +static int anx7411_psy_prop_writeable(struct power_supply *psy,
> > + enum power_supply_property psp)
> > +{
> > + return (psp == POWER_SUPPLY_PROP_ONLINE) ? 1 : 0;
>
> return psp == POWER_SUPPLY_PROP_ONLINE;
OK
>
> > +}
> > +
> > +static int anx7411_psy_get_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct anx7411_data *ctx = power_supply_get_drvdata(psy);
> > + int ret = 0;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_USB_TYPE:
> > + val->intval = ctx->usb_type;
> > + break;
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + val->intval = ctx->psy_online;
> > + break;
> > + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> > + case POWER_SUPPLY_PROP_VOLTAGE_MIN:
> > + case POWER_SUPPLY_PROP_VOLTAGE_MAX:
> > + val->intval = (ctx->psy_online) ?
> > + ctx->typec.request_voltage * 1000 : 0;
> > + break;
> > + case POWER_SUPPLY_PROP_CURRENT_NOW:
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + val->intval = (ctx->psy_online) ?
> > + ctx->typec.request_current * 1000 : 0;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > + return ret;
> > +}
> > +
> > +static int anx7411_psy_register(struct anx7411_data *ctx)
> > +{
> > + struct power_supply_config psy_cfg = {};
> > + const char *port_dev_name = dev_name(ctx->dev);
> > + size_t psy_name_len = strlen(anx7411_psy_name_prefix) +
> > + strlen(port_dev_name) + 1;
> > + char *psy_name;
> > + struct power_supply_desc *psy_desc = &ctx->psy_desc;
> > +
> > + psy_cfg.drv_data = ctx;
> > + psy_cfg.fwnode = dev_fwnode(ctx->dev);
> > + psy_name = devm_kzalloc(ctx->dev, psy_name_len, GFP_KERNEL);
> > + if (!psy_name) {
> > + dev_warn(ctx->dev, "unable to alloc psy memory\n");
> > + return -ENOMEM;
> > + }
> > +
> > + snprintf(psy_name, psy_name_len, "%s%s", anx7411_psy_name_prefix,
> > + port_dev_name);
> > +
> > + psy_desc->name = psy_name;
> > + psy_desc->type = POWER_SUPPLY_TYPE_USB;
> > + psy_desc->usb_types = anx7411_psy_usb_types;
> > + psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types);
> > + psy_desc->properties = anx7411_psy_props,
> > + psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props),
> > +
> > + psy_desc->get_property = anx7411_psy_get_prop,
> > + psy_desc->set_property = anx7411_psy_set_prop,
> > + psy_desc->property_is_writeable = anx7411_psy_prop_writeable,
> > +
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
> > + ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg);
> > +
> > + if (IS_ERR(ctx->psy))
> > + dev_warn(ctx->dev, "unable to register psy\n");
> > +
> > + return PTR_ERR_OR_ZERO(ctx->psy);
> > +}
> > +
> > +static int anx7411_i2c_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + struct anx7411_data *plat;
> > + struct device *dev = &client->dev;
> > + int ret;
> > +
> > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> > + return -ENODEV;
> > +
> > + plat = kzalloc(sizeof(*plat), GFP_KERNEL);
> > + if (!plat)
> > + return -ENOMEM;
>
> Memory leak. I think you wanted to use devm_kzalloc() here, right?
>
OK
> > + plat->tcpc_client = client;
> > + i2c_set_clientdata(client, plat);
> > +
> > + mutex_init(&plat->lock);
> > +
> > + ret = anx7411_register_i2c_dummy_clients(plat, client);
> > + if (ret) {
> > + dev_err(dev, "fail to reserve I2C bus\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7411_typec_switch_probe(plat, dev);
> > + if (ret) {
> > + dev_err(dev, "fail to probe typec switch\n");
> > + goto free_i2c_dummy;
> > + }
> > +
> > + ret = anx7411_typec_port_probe(plat, dev);
> > + if (ret) {
> > + dev_err(dev, "fail to probe typec property.\n");
> > + ret = -ENODEV;
> > + goto free_typec_switch;
> > + }
> > +
> > + plat->intp_irq = client->irq;
> > + if (!client->irq) {
> > + dev_info(dev, "no default interrupt IRQ, probe GPIO interrupt");
> > + anx7411_get_gpio_irq(plat);
> > + }
> > +
> > + if (!plat->intp_irq) {
> > + dev_err(dev, "fail to get interrupt IRQ\n");
> > + goto free_typec_port;
> > + }
> > +
> > + plat->dev = dev;
> > + plat->psy_online = ANX7411_PSY_OFFLINE;
> > + anx7411_psy_register(plat);
> > +
> > + if (plat->intp_irq) {
> > + INIT_WORK(&plat->work, anx7411_work_func);
> > + plat->workqueue = alloc_workqueue("anx7411_work",
> > + WQ_FREEZABLE |
> > + WQ_MEM_RECLAIM,
> > + 1);
> > + if (!plat->workqueue) {
> > + dev_err(dev, "fail to create work queue\n");
> > + ret = -ENOMEM;
> > + goto free_typec_port;
> > + }
> > +
> > + ret = devm_request_threaded_irq(dev, plat->intp_irq,
> > + NULL, anx7411_intr_isr,
> > + IRQF_TRIGGER_FALLING |
> > + IRQF_ONESHOT,
> > + "anx7411-intp", plat);
> > + if (ret) {
> > + dev_err(dev, "fail to request irq\n");
> > + goto free_wq;
> > + }
> > +
> > + dev_info(dev, "registered irq %d handler\n", plat->intp_irq);
> > + }
> > +
> > + anx7411_typec_check_connection(plat);
> > +
> > + pm_runtime_enable(dev);
> > +
> > + return 0;
> > +
> > +free_wq:
> > + destroy_workqueue(plat->workqueue);
> > +
> > +free_typec_port:
> > + typec_unregister_port(plat->typec.port);
> > + anx7411_port_unregister_altmodes(plat->typec.port_amode);
> > +
> > +free_typec_switch:
> > + anx7411_unregister_switch(plat);
> > + anx7411_unregister_mux(plat);
> > +
> > +free_i2c_dummy:
> > + i2c_unregister_device(plat->spi_client);
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_i2c_remove(struct i2c_client *client)
> > +{
> > + struct anx7411_data *plat = i2c_get_clientdata(client);
> > +
>
> Empty line.
>
> > + anx7411_partner_unregister_altmode(plat);
> > + anx7411_unregister_partner(plat);
> > +
> > + if (plat->workqueue)
> > + destroy_workqueue(plat->workqueue);
> > +
> > + if (plat->spi_client)
> > + i2c_unregister_device(plat->spi_client);
> > +
> > + if (plat->typec.role_sw)
> > + usb_role_switch_put(plat->typec.role_sw);
> > +
> > + anx7411_unregister_mux(plat);
> > +
> > + anx7411_unregister_switch(plat);
> > +
> > + if (plat->typec.port)
> > + typec_unregister_port(plat->typec.port);
> > +
> > + anx7411_port_unregister_altmodes(plat->typec.port_amode);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id anx7411_id[] = {
> > + {"anx7411", 0},
> > + {}
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, anx7411_id);
> > +
> > +static const struct of_device_id anx_match_table[] = {
> > + {.compatible = "analogix,anx7411",},
> > + {},
> > +};
> > +
> > +static struct i2c_driver anx7411_driver = {
> > + .driver = {
> > + .name = "anx7411",
> > + .of_match_table = anx_match_table,
> > + .pm = &anx7411_pm_ops,
> > + },
> > + .probe = anx7411_i2c_probe,
> > + .remove = anx7411_i2c_remove,
> > +
> > + .id_table = anx7411_id,
> > +};
> > +
> > +module_i2c_driver(anx7411_driver);
> > +
> > +MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver");
> > +MODULE_AUTHOR("Xin Ji <xji@...logixsemi.com>");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_VERSION("0.1.4");
>
> It seems that there are a few quality issues, and some duplication with
> the tcpci.c driver.
Yes, but the driver cannot call the tcpci interface.
Thanks for review, I'll update the next patch this week after tested.
Thanks,
Xin
>
> thanks,
>
> --
> heikki
Powered by blists - more mailing lists