linux-kernel - Re: [PATCH v8 06/19] drm/mediatek: dpi: implement a CK/DE pol toggle in board config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAAOTY__AgD_Rc_5TS4v+sBDeN-nd0DbwuERhW=OsvsbMWSsxsA@mail.gmail.com>
Date:   Mon, 21 Feb 2022 10:14:02 +0800
From:   Chun-Kuang Hu <chunkuang.hu@...nel.org>
To:     Guillaume Ranquet <granquet@...libre.com>
Cc:     Chun-Kuang Hu <chunkuang.hu@...nel.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>, deller@....de,
        CK Hu <ck.hu@...iatek.com>, Jitao Shi <jitao.shi@...iatek.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        DRI Development <dri-devel@...ts.freedesktop.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        DTML <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        linux-phy@...ts.infradead.org, linux-fbdev@...r.kernel.org
Subject: Re: [PATCH v8 06/19] drm/mediatek: dpi: implement a CK/DE pol toggle
 in board config

HI, Guillaume:

Guillaume Ranquet <granquet@...libre.com> 於 2022年2月18日 週五 下午10:56寫道：
>
> Adds a bit of flexibility to support boards without CK/DE pol support

I'm not sure what the term 'board' mean. Do you mean different board
with different panel but all with mt8195-dpintf? If so, you should get
CK/DE support from panel driver not fix this information in dpi
driver.

Regards,
Chun-Kuang.

>
> Signed-off-by: Guillaume Ranquet <granquet@...libre.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 22 +++++++++++++++++-----
>  1 file changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 4746eb3425674..545a1337cc899 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -125,6 +125,7 @@ struct mtk_dpi_conf {
>         bool edge_sel_en;
>         const u32 *output_fmts;
>         u32 num_output_fmts;
> +       bool is_ck_de_pol;
>         const struct mtk_dpi_yc_limit *limit;
>  };
>
> @@ -211,13 +212,20 @@ static void mtk_dpi_config_pol(struct mtk_dpi *dpi,
>                                struct mtk_dpi_polarities *dpi_pol)
>  {
>         unsigned int pol;
> +       unsigned int mask;
>
> -       pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL) |
> -             (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL) |
> -             (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 : HSYNC_POL) |
> +       mask = HSYNC_POL | VSYNC_POL;
> +       pol = (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 : HSYNC_POL) |
>               (dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 : VSYNC_POL);
> -       mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
> -                    CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
> +       if (dpi->conf->is_ck_de_pol) {
> +               mask |= CK_POL | DE_POL;
> +               pol |= (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ?
> +                       0 : CK_POL) |
> +                      (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ?
> +                       0 : DE_POL);
> +       }
> +
> +       mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol, mask);
>  }
>
>  static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
> @@ -799,6 +807,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
>         .max_clock_khz = 300000,
>         .output_fmts = mt8173_output_fmts,
>         .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> +       .is_ck_de_pol = true,
>         .limit = &mtk_dpi_limit,
>  };
>
> @@ -809,6 +818,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
>         .max_clock_khz = 150000,
>         .output_fmts = mt8173_output_fmts,
>         .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> +       .is_ck_de_pol = true,
>         .limit = &mtk_dpi_limit,
>  };
>
> @@ -818,6 +828,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
>         .max_clock_khz = 100000,
>         .output_fmts = mt8183_output_fmts,
>         .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> +       .is_ck_de_pol = true,
>         .limit = &mtk_dpi_limit,
>  };
>
> @@ -827,6 +838,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
>         .max_clock_khz = 150000,
>         .output_fmts = mt8173_output_fmts,
>         .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> +       .is_ck_de_pol = true,
>         .limit = &mtk_dpi_limit,
>  };
>
> --
> 2.34.1
>