| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DU0PR04MB9417B2F5C1640FB23EFABF2E883D9@DU0PR04MB9417.eurprd04.prod.outlook.com>
Date: Thu, 24 Feb 2022 10:20:15 +0000
From: Peng Fan <peng.fan@....com>
To: Sascha Hauer <s.hauer@...gutronix.de>,
"Peng Fan (OSS)" <peng.fan@....nxp.com>
CC: "sboyd@...nel.org" <sboyd@...nel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
Abel Vesa <abel.vesa@....com>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
dl-linux-imx <linux-imx@....com>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH V4 4/5] clk: imx: support fracn gppll
> Subject: Re: [PATCH V4 4/5] clk: imx: support fracn gppll
>
> On Thu, Feb 24, 2022 at 04:22:50PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@....com>
> >
> > This PLL module is a Fractional-N synthesizer, supporting 30-bit
> > numerator and denominator. Numerator is a signed number. It has
> > feature to adjust fractional portion of feedback divider dynamically.
> > This fracn gppll is used in i.MX93.
> >
> > Reviewed-by: Abel Vesa <abel.vesa@....com>
> > Signed-off-by: Peng Fan <peng.fan@....com>
> > ---
> > drivers/clk/imx/Makefile | 1 +
> > drivers/clk/imx/clk-fracn-gppll.c | 326
> ++++++++++++++++++++++++++++++
> > drivers/clk/imx/clk.h | 21 ++
> > 3 files changed, 348 insertions(+)
> > create mode 100644 drivers/clk/imx/clk-fracn-gppll.c
> >
> > diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index
> > 36c04922d789..60c8a4bb7574 100644
> > --- a/drivers/clk/imx/Makefile
> > +++ b/drivers/clk/imx/Makefile
> > @@ -5,6 +5,7 @@ mxc-clk-objs += clk-busy.o mxc-clk-objs +=
> > clk-composite-7ulp.o mxc-clk-objs += clk-composite-8m.o mxc-clk-objs
> > += clk-composite-93.o
> > +mxc-clk-objs += clk-fracn-gppll.o
> > mxc-clk-objs += clk-cpu.o
> > mxc-clk-objs += clk-divider-gate.o
> > mxc-clk-objs += clk-fixup-div.o
> > diff --git a/drivers/clk/imx/clk-fracn-gppll.c
> > b/drivers/clk/imx/clk-fracn-gppll.c
> > new file mode 100644
> > index 000000000000..b6add3a2e472
> > --- /dev/null
> > +++ b/drivers/clk/imx/clk-fracn-gppll.c
> > @@ -0,0 +1,326 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2021 NXP
> > + */
> > +
> > +#include <asm/div64.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/err.h>
> > +#include <linux/export.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/slab.h>
> > +#include <linux/jiffies.h>
> > +
> > +#include "clk.h"
> > +
> > +#define PLL_CTRL 0x0
> > +#define CLKMUX_BYPASS BIT(2)
> > +#define CLKMUX_EN BIT(1)
> > +#define POWERUP_MASK BIT(0)
> > +
> > +#define PLL_ANA_PRG 0x10
> > +#define PLL_SPREAD_SPECTRUM 0x30
> > +
> > +#define PLL_NUMERATOR 0x40
> > +#define PLL_MFN_MASK GENMASK(31, 2)
> > +#define PLL_MFN_SHIFT 2
> > +
> > +#define PLL_DENOMINATOR 0x50
> > +#define PLL_MFD_MASK GENMASK(29, 0)
> > +
> > +#define PLL_DIV 0x60
> > +#define PLL_MFI_MASK GENMASK(24, 16)
>
> Is the MFI field really 9 bits wide? Could be, I don't have the reference manual.
> It just looks like it could be a one-off.
Yes, 9 bits wide. MFI: 24-16
Integer portion of loop divider
Sets the value of the divider in the PLL feedback loop, and the value specified establishes the
multiplication factor applied to the reference frequency. Divider value = MFI, where the chosen MFI does
not violate VCO frequency specifications.
>
> > +#define PLL_MFI_SHIFT 16
> > +#define PLL_RDIV_MASK GENMASK(15, 13)
> > +#define PLL_RDIV_SHIFT 13
> > +#define PLL_ODIV_MASK GENMASK(7, 0)
>
> The *_SHIFT defines can be removed.
ok
>
> > +static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
> > + unsigned long prate)
> > +{
> > + struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw);
> > + const struct imx_fracn_gppll_rate_table *rate;
> > + u32 tmp, pll_div, ana_mfn;
> > + int ret;
> > +
> > + rate = imx_get_pll_settings(pll, drate);
> > +
> > + /* Disable output */
> > + tmp = readl_relaxed(pll->base + PLL_CTRL);
> > + tmp &= ~CLKMUX_EN;
> > + writel_relaxed(tmp, pll->base + PLL_CTRL);
> > +
> > + /* Power Down */
> > + tmp &= ~POWERUP_MASK;
> > + writel_relaxed(tmp, pll->base + PLL_CTRL);
> > +
> > + /* Disable BYPASS */
> > + tmp &= ~CLKMUX_BYPASS;
> > + writel_relaxed(tmp, pll->base + PLL_CTRL);
> > +
> > + pll_div = FIELD_PREP(PLL_RDIV_MASK, rate->rdiv) | rate->odiv |
> > + FIELD_PREP(PLL_MFI_MASK, rate->mfi);
> > + writel_relaxed(pll_div, pll->base + PLL_DIV);
> > + writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
> > + writel_relaxed(rate->mfn << PLL_MFN_SHIFT, pll->base +
> > +PLL_NUMERATOR);
>
> FIELD_PREP
Fix in V5.
>
> > +
> > + /* Wait for 5us according to fracn mode pll doc */
> > + udelay(5);
> > +
> > + /* Enable Powerup */
> > + tmp |= POWERUP_MASK;
> > + writel_relaxed(tmp, pll->base + PLL_CTRL);
> > +
> > + /* Wait Lock */
> > + ret = clk_fracn_gppll_wait_lock(pll);
> > + if (ret)
> > + return ret;
> > +
> > + /* Enable output */
> > + tmp |= CLKMUX_EN;
> > + writel_relaxed(tmp, pll->base + PLL_CTRL);
> > +
> > + ana_mfn = (readl_relaxed(pll->base + PLL_STATUS) &
> PLL_MFN_MASK) >>
> > +PLL_MFN_SHIFT;
>
> FIELD_GET
Fix in V5.
Thanks,
Peng.
>
> Sascha
>
> --
> Pengutronix e.K. |
> |
> Steuerwalder Str. 21 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.p
> engutronix.de%2F&data=04%7C01%7Cpeng.fan%40nxp.com%7C4dc747
> 31b1f34e99946108d9f77c488f%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C637812935432676998%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi
> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C30
> 00&sdata=0MkuXWdHlLdazu63dgaTlqJdf1RJKwZcSeI2dnE0Uho%3D&am
> p;reserved=0 |
> 31137 Hildesheim, Germany | Phone:
> +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |
Powered by blists - more mailing lists