[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cb77935e-64e0-c8b6-9fba-9835a3be432f@canonical.com>
Date: Thu, 3 Mar 2022 11:37:52 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Tyrone Ting <warp5tw@...il.com>, avifishman70@...il.com,
tmaimon77@...il.com, tali.perry1@...il.com, venture@...gle.com,
yuenn@...gle.com, benjaminfair@...gle.com, robh+dt@...nel.org,
yangyicong@...ilicon.com, semen.protsenko@...aro.org,
wsa@...nel.org, jie.deng@...el.com, sven@...npeter.dev,
bence98@....bme.hu, lukas.bulwahn@...il.com, arnd@...db.de,
olof@...om.net, andriy.shevchenko@...ux.intel.com,
tali.perry@...oton.com, Avi.Fishman@...oton.com,
tomer.maimon@...oton.com, KWLIU@...oton.com, JJLIU0@...oton.com,
kfting@...oton.com
Cc: openbmc@...ts.ozlabs.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 02/11] dt-bindings: i2c: npcm: support NPCM845
On 03/03/2022 09:31, Tyrone Ting wrote:
> From: Tyrone Ting <kfting@...oton.com>
>
> Add compatible and nuvoton,sys-mgr description for NPCM i2c module.
>
> Signed-off-by: Tyrone Ting <kfting@...oton.com>
> Signed-off-by: Tali Perry <tali.perry1@...il.com>
> ---
> .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 26 +++++++++++++++----
> 1 file changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> index 128444942aec..37976ddcf406 100644
> --- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> @@ -7,17 +7,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
> title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
>
> description: |
> - The NPCM750x includes sixteen I2C bus controllers. All Controllers support
> - both master and slave mode. Each controller can switch between master and slave
> - at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
> - RX.
> + I2C bus controllers of the NPCM series support both master and
> + slave mode. Each controller can switch between master and slave at run time
> + (i.e. IPMB mode). HW FIFO for TX and RX are supported.
>
> maintainers:
> - Tali Perry <tali.perry1@...il.com>
>
> properties:
> compatible:
> - const: nuvoton,npcm750-i2c
> + enum:
> + - nuvoton,npcm750-i2c
> + - nuvoton,npcm845-i2c
>
> reg:
> maxItems: 1
> @@ -36,6 +37,10 @@ properties:
> default: 100000
> enum: [100000, 400000, 1000000]
>
> + nuvoton,sys-mgr:
> + $ref: "/schemas/types.yaml#/definitions/phandle"
> + description: The phandle of system manager register node.
> +
> required:
> - compatible
> - reg
> @@ -44,6 +49,16 @@ required:
>
> allOf:
> - $ref: /schemas/i2c/i2c-controller.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + const:
> + - nuvoton,npcm845-i2c
This should be one line in const (not an enum).
Rest looks good to me.
Best regards,
Krzysztof
Powered by blists - more mailing lists