[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YjBCImqGsbIZ3IF4@Red>
Date: Tue, 15 Mar 2022 08:37:06 +0100
From: Corentin Labbe <clabbe.montjoie@...il.com>
To: Petr Štetiar <ynezz@...e.cz>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Maxime Ripard <mripard@...nel.org>,
Bastien Roucariès <rouca@...ian.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Rob Herring <robh+dt@...nel.org>, stable@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix
ethernet phy-mode"
Le Tue, Mar 15, 2022 at 08:28:58AM +0100, Petr Štetiar a écrit :
> Petr Štetiar <ynezz@...e.cz> [2022-03-08 13:55:30]:
>
> Hi Greg,
>
> one week has passed and as I didn't received any feedback, I'm providing more
> details in a hope to make it more clear, why I think, that this fix is wrong
> and should be reverted in LTS kernels 5.10 and 5.15.
>
> > This reverts commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 as it breaks
> > network on my A20-olinuxino-lime2 hardware revision "K" which has Micrel
> > KSZ9031RNXCC-TR Gigabit PHY. Bastien has probably some previous hardware
> > revisions which were based on RTL8211E-VB-CG1 PHY and thus this fix was
> > working on his board.
>
> Disclaimer, I don't own A20-olinuxino-lime2 board with earlier HW revisions
> G/G1/G2 utilizing RTL8211E PHY.
>
> My understanding is, that up to kernel version 5.9 and specifically commit
> bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") it was
> likely possible to use same DTS for A20-olinuxino-lime2 with KSZ9031 or
> RTL8211E PHYs (all HW revisions).
>
> At least I was using my A20-olinuxino-lime2 HW revision K with KSZ9031 PHY
> just fine with 4.19 kernel. After upgrade to 5.10 LTS kernel my network
> stopped working, reverting stable backport commit a90398438517 ("ARM: dts:
> sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode") fixed it.
>
> From my POV proper fix for earlier HW revisions G/G1/G2 is introduction of
> sun7i-a20-olinuxino-lime2-revG.dts with a proper `phy-mode` for RTL8211E PHY.
>
> Cheers,
>
> Petr
>
Hello
If your patch is applied, older revisions will stop working, right ?
What about adding a new dtb like sun7i-a20-olinuxino-lime2-revk.dts ?
Regards
> > Cc: stable@...r.kernel.org
> > Cc: Bastien Roucariès <rouca@...ian.org>
> > References: https://github.com/openwrt/openwrt/issues/9153
> > References: https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A20-OLinuXino-LIME2/hardware_revision_changes_log.txt
> > Signed-off-by: Petr Štetiar <ynezz@...e.cz>
> > ---
> > arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > index ecb91fb899ff..8077f1716fbc 100644
> > --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > @@ -112,7 +112,7 @@ &gmac {
> > pinctrl-names = "default";
> > pinctrl-0 = <&gmac_rgmii_pins>;
> > phy-handle = <&phy1>;
> > - phy-mode = "rgmii-id";
> > + phy-mode = "rgmii";
> > status = "okay";
> > };
>
Powered by blists - more mailing lists