| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAE-0n53ho2DX2rqQMvvKAuDCfsWW62TceTaNPzv5Mn_NQ-U6dA@mail.gmail.com>
Date: Thu, 17 Mar 2022 18:07:49 -0400
From: Stephen Boyd <swboyd@...omium.org>
To: Prasad Malisetty <quic_pmaliset@...cinc.com>, agross@...nel.org,
bhelgaas@...gle.com, bjorn.andersson@...aro.org, kw@...ux.com,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, lorenzo.pieralisi@....com,
rajatja@...gle.com, refactormyself@...il.com, robh@...nel.org
Cc: quic_vbadigan@...cinc.com, quic_ramkri@...cinc.com,
manivannan.sadhasivam@...aro.org
Subject: Re: [PATCH v4] PCI: qcom: Add system PM support
Quoting Prasad Malisetty (2022-03-07 10:55:06)
> Add suspend_noirq and resume_noirq callbacks to handle
Nitpick: They're no longer noirq so this should say "Add suspend and
resume callbacks"
> system suspend and resume in dwc PCIe controller driver.
>
> When system suspends, send PME turnoff message to enter
> link into L2 state. Along with powerdown the PHY, disable
> pipe clock, switch gcc_pcie_1_pipe_clk_src to XO if mux is
> supported and disable the pcie clocks, regulators.
I think Bjorn A. and Dmitry are trying to avoid this whole parking thing
in another series? Can you take a look at that?
>
> When system resumes, PCIe link will be re-established and
> setup rc settings.
>
> Signed-off-by: Prasad Malisetty <quic_pmaliset@...cinc.com>
>
> ---
> Changes since v3:
> - Replaced noirq hooks with normal suspend/resume hooks.
> - Removed local variable and placed in function itself.
>
> Changes since v2:
> - Removed unnecessary variable initializations and comments.
> - Removed platform specific variables declarations.
> - Added MACRO names for the BIT shiftings.
>
> Changes since v1:
> - Removed unnecessary logs and modified log level suggested by Manivannan.
> - Removed platform specific callbacks as PM support is generic.
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 97 ++++++++++++++++++++++++++++++++++
> 1 file changed, 97 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 6ab9089..4d29c80 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -48,6 +48,7 @@
> #define PCIE20_PARF_PHY_REFCLK 0x4C
> #define PHY_REFCLK_SSP_EN BIT(16)
> #define PHY_REFCLK_USE_PAD BIT(12)
> +#define PHY_POWER_DOWN 0x1
>
> #define PCIE20_PARF_DBI_BASE_ADDR 0x168
> #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
> @@ -62,6 +63,8 @@
>
> #define PCIE20_ELBI_SYS_CTRL 0x04
> #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0)
> +#define PCIE_PME_TURNOFF_MSG BIT(4)
> +#define PCIE_PM_LINKST_IN_L2 BIT(5)
>
> #define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
> #define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4
> @@ -73,6 +76,8 @@
>
> #define PCIE20_PARF_Q2A_FLUSH 0x1AC
>
> +#define PCIE20_PARF_PM_STTS 0x24
> +
> #define PCIE20_MISC_CONTROL_1_REG 0x8BC
> #define DBI_RO_WR_EN 1
>
> @@ -1645,6 +1650,97 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> return ret;
> }
>
> +static int qcom_pcie_send_pme_turnoff_msg(struct qcom_pcie *pcie)
> +{
> + int ret;
> + u32 val, poll_val;
> + struct dw_pcie *pci = pcie->pci;
> + struct device *dev = pci->dev;
> +
> + val = readl(pcie->elbi + PCIE20_ELBI_SYS_CTRL);
> + val |= PCIE_PME_TURNOFF_MSG;
> + writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
> +
> + ret = readl_poll_timeout((pcie->parf + PCIE20_PARF_PM_STTS), poll_val,
> + (poll_val & PCIE_PM_LINKST_IN_L2),
> + 10000, 100000);
> + if (!ret)
> + dev_dbg(dev, "Device entered L23_Ready state\n");
> + else
> + dev_err(dev, "Device failed to enter L23_Ready. PM_STTS 0x%x\n",
> + readl_relaxed(pcie->parf + PCIE20_PARF_PM_STTS));
> +
> + return ret;
> +}
> +
> +static void qcom_pcie_host_disable(struct qcom_pcie *pcie)
> +{
> + qcom_ep_reset_assert(pcie);
> +
> + /* Put PHY into POWER DOWN state */
> + phy_power_off(pcie->phy);
> +
> + writel(PHY_POWER_DOWN, pcie->parf + PCIE20_PARF_PHY_CTRL);
> +
> + if (pcie->cfg->ops->post_deinit)
> + pcie->cfg->ops->post_deinit(pcie);
> +
> + /* Disable PCIe clocks and regulators */
> + pcie->cfg->ops->deinit(pcie);
> +}
> +
> +static int __maybe_unused qcom_pcie_pm_suspend(struct device *dev)
> +{
> + int ret;
> + struct qcom_pcie *pcie = dev_get_drvdata(dev);
> + struct dw_pcie *pci = pcie->pci;
> +
> + if (!dw_pcie_link_up(pci)) {
> + dev_dbg(dev, "Power has been turned off already\n");
> + return 0;
> + }
> +
> + ret = qcom_pcie_send_pme_turnoff_msg(pcie);
> + if (ret)
> + return ret;
> +
> + /* Power down the PHY, disable clock and regulators */
> + qcom_pcie_host_disable(pcie);
> +
> + return 0;
> +}
> +
> +/* Resume the PCIe link */
> +static int __maybe_unused qcom_pcie_pm_resume(struct device *dev)
> +{
> + int ret;
> + struct qcom_pcie *pcie = dev_get_drvdata(dev);
> + struct dw_pcie *pci = pcie->pci;
> + struct pcie_port *pp = &pci->pp;
> +
> + ret = qcom_pcie_host_init(pp);
> + if (ret) {
> + dev_err(dev, "cannot initialize host\n");
Capitalize cannot?
> + return ret;
> + }
> +
> + dw_pcie_setup_rc(pp);
> +
> + qcom_pcie_start_link(pci);
> +
> + ret = dw_pcie_wait_for_link(pci);
> + if (ret) {
> + dev_err(dev, "Link never came up, Resume failed\n");
> + return ret;
Drop return and braces.
> + }
> +
> + return 0;
return ret;
> +}
> +
> +static const struct dev_pm_ops qcom_pcie_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(qcom_pcie_pm_suspend, qcom_pcie_pm_resume)
> +};
> +
Powered by blists - more mailing lists