linux-kernel - [PATCH v1] ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 18 Mar 2022 08:09:35 +0000
From:   Howard Chiu <howard_chiu@...eedtech.com>
To:     "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "joel@....id.au" <joel@....id.au>,
        "andrew@...id.au" <andrew@...id.au>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     Troy Lee <troy_lee@...eedtech.com>
Subject: [PATCH v1] ARM: dts: aspeed: ast2600-evb: Enable RX delay for
 MAC0/MAC1

Since mac0/1 and mac2/3 are physically located on different die,
they have different properties by nature, which is mac0/1 has smaller delay step.

The property 'phy-mode' on ast2600 mac0 and mac1 is recommended to set to 'rgmii-rxid'
which enables the RX interface delay from the PHY chip.
Refer page 45 of SDK User Guide v08.00
https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.00/SDK_User_Guide_v08.00.pdf

Set mac delay according to the mactest result.

Signed-off-by: Howard Chiu <howard_chiu@...eedtech.com>
---
 arch/arm/boot/dts/aspeed-ast2600-evb.dts | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..db16ba307e97 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -103,7 +103,7 @@ ethphy3: ethernet-phy@0 {
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -114,7 +114,7 @@ &mac0 {
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
@@ -141,6 +141,21 @@ &mac3 {
 	pinctrl-0 = <&pinctrl_rgmii4_default>;
 };
 
+&syscon {
+	mac0-clk-delay = <0x10 0x0a
+			  0x10 0x10
+			  0x10 0x10>;
+	mac1-clk-delay = <0x10 0x0a
+			  0x10 0x10
+			  0x10 0x10>;
+	mac2-clk-delay = <0x08 0x04
+			  0x08 0x04
+			  0x08 0x04>;
+	mac3-clk-delay = <0x08 0x04
+			  0x08 0x04
+			  0x08 0x04>;
+};
+
 &emmc_controller {
 	status = "okay";
 };
-- 
2.25.1